Am 30.08.2010 13:12, schrieb Stefan Fendt: > Hi all, > > >> How much additional RAM does it take? >>
How much additional RAM would be tolerable? I personally would even tolerate something like this: 6 Waveforms * 8192 Samples * 512 Steps * sizeof(float) = 96,0 MiB for the wavetable... which (after analysing some spectra) is only very little better (SNR wise) but nearly(? I can't hear a difference...) indistinguishable to this: 6 * 2048 * 256 * 4 = 12,0 MiB (sounds very good on 44.1, 88.2, 96 and 192 kHz) but even the 3MB version sounds good with 44.1 and OK with 88 or 96kHz but in the low bass end it misses something at 192kHz... So,... I personally would opt for the 12MB variant... (which btw could be perfectly precomputed, so it doesn't slow down the initialization of the first oscillator instance -- on a long run... currently I can live with that... ;-) until I have an otherwise (near) perfect scenario...) cu Stefan ------------------------------------------------------------------------------ This SF.net Dev2Dev email is sponsored by: Show off your parallel programming skills. Enter the Intel(R) Threading Challenge 2010. http://p.sf.net/sfu/intel-thread-sfd _______________________________________________ LMMS-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/lmms-devel
