On 03/22/2014 04:08 PM, Johannes Lorenz wrote: >>> * WT-sound with pulse/freq/ring modulation on top. The modulator must be >>> able> >>> to know the notes' frequencies (e.g. to modulate with the same frequency). >> Doable with my new synth that I'm working on right now. Wavetable >> synthesis with modulations is what it's all about. > If you can switch between the waveforms by interpolation (read below), than > it's 1 point for you.
Yes. It has two pairs of oscillators, arranged as: A1, A2, B1, B2. A2 modulates A1, B2 modulates B1, you can select modulations for each pair (mix, am, ring, pm), you can modify the waveform of each oscillator individually, and you can then mix between the outputs of the A-pair and B-pair, so that effectively you can get a switch or a transition of waveform between A and B. This is the current functionality, but it's still in development and I may add some more stuff to it. You can try it if you want, it's in my repo in "wavetablesynth" branch. >> Also doable with triple oscillator as you can load custom waveforms into >> triple osc oscs. Load up the waveforms you want and modulate them >> however you want. My new synth just makes it easier since it comes with >> wavegraphs. Also it provides ring modulation and some other neat stuff. > You can of course change the waveform from square to sine or to saw, by just > pressing the button. But what I mean is switching between them by a kind of > useful interpolation (e.g. LP1-ing a saw slowly until it gets a sine). Well if you just want filtering, you can do it with the builtin filters. But yeah you'll probably want my new synth for that. > Oh, I meant threshold knob. Sorry... For the pitch, of course, you can > modulate it, but this is going to be extremely much work, so it seems > unrealistic to me. LB302 can not do "anything ZASF can't do": no WT sounds > and > no vibed sounds. Like I said, you can use waveshaper with LB302 to modify the waveshape. Waveshaper has a wavetable graph that lets you modify the waveshape of the signal. Since LB302 is a monosynth, you can set it to saw and just draw the waveshape you want, and it translates the saw waves to the shape you draw. >> Use vibed with triangle waveform, modify waveform with waveshaper to >> exponential, mix between linear/exp by sliding the waveshaper w/d knob. > If I click on the question mark in Vibed, it shows an open file dialog. How > can I set Vibed's waveform to something waveshaper put out? You can't, at this time. If you want to use custom waveforms in vibed/bitinvader/tripleosc, you need to create the waveforms with an external editor like Audacity, for now at least. What I meant was, just set Vibed outputing a triangle wave, then add waveshaper to the fx chain. Use waveshaper to modify the triangle wave to exponential wave, then slide the wet/dry knob of the waveshaper effect, to mix between the unmodified triangle wave, and the modified exp.wave. ------------------------------------------------------------------------------ Learn Graph Databases - Download FREE O'Reilly Book "Graph Databases" is the definitive new guide to graph databases and their applications. Written by three acclaimed leaders in the field, this first edition is now available. Download your free book today! http://p.sf.net/sfu/13534_NeoTech _______________________________________________ LMMS-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/lmms-devel
