Merged,
Thanks,
Maxim.
On 06/11/15 13:00, Stuart Haslam wrote:
The test generates UDP packets with the source and destination port numbers
set to 0 and source and destination IP addresses of 0.0.0.0, which is
likely to cause them to be dropped and the test failing. Fix this by
correctly initialising the packet fields to use valid values.
Reported-by: Balasubramanian Manoharan <bala.manoha...@linaro.org>
Signed-off-by: Stuart Haslam <stuart.has...@linaro.org>
---
This is a fix for; https://bugs.linaro.org/show_bug.cgi?id=1632
test/validation/odp_pktio.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/test/validation/odp_pktio.c b/test/validation/odp_pktio.c
index e1025d6..3586542 100644
--- a/test/validation/odp_pktio.c
+++ b/test/validation/odp_pktio.c
@@ -154,8 +154,8 @@ static uint32_t pktio_init_packet(odp_packet_t pkt)
/* IP */
odp_packet_l3_offset_set(pkt, ODPH_ETHHDR_LEN);
ip = (odph_ipv4hdr_t *)(buf + ODPH_ETHHDR_LEN);
- ip->dst_addr = odp_cpu_to_be_32(0);
- ip->src_addr = odp_cpu_to_be_32(0);
+ ip->dst_addr = odp_cpu_to_be_32(0x0a000064);
+ ip->src_addr = odp_cpu_to_be_32(0x0a000001);
ip->ver_ihl = ODPH_IPV4 << 4 | ODPH_IPV4HDR_IHL_MIN;
ip->tot_len = odp_cpu_to_be_16(pkt_len - ODPH_ETHHDR_LEN);
ip->ttl = 128;
@@ -168,8 +168,8 @@ static uint32_t pktio_init_packet(odp_packet_t pkt)
/* UDP */
odp_packet_l4_offset_set(pkt, ODPH_ETHHDR_LEN + ODPH_IPV4HDR_LEN);
udp = (odph_udphdr_t *)(buf + ODPH_ETHHDR_LEN + ODPH_IPV4HDR_LEN);
- udp->src_port = odp_cpu_to_be_16(0);
- udp->dst_port = odp_cpu_to_be_16(0);
+ udp->src_port = odp_cpu_to_be_16(12049);
+ udp->dst_port = odp_cpu_to_be_16(12050);
udp->length = odp_cpu_to_be_16(pkt_len -
ODPH_ETHHDR_LEN - ODPH_IPV4HDR_LEN);
udp->chksum = 0;
_______________________________________________
lng-odp mailing list
lng-odp@lists.linaro.org
https://lists.linaro.org/mailman/listinfo/lng-odp
