I like this. Thanks for this contribution.
For this series:
Reviewed-and-tested-by: Bill Fischofer <bill.fischo...@linaro.org
<mailto:bill.fischo...@linaro.org>>
On Mon, Feb 22, 2016 at 4:15 AM, Juha-Matti Tilli
<juha-matti.ti...@nokia.com <mailto:juha-matti.ti...@nokia.com>> wrote:
The ODP distribution is lacking a simple example how to receive
and send
packets. The l2fwd is overly complicated because it supports an
arbitrary
number of interfaces, bi-directional operation and an arbitrary
number of
threads.
To remedy this situation, add l2fwd_simple which is a single-threaded
unidirectional variant of l2fwd for exactly two interfaces.
l2fwd_simple
can be used as an example application when learning how to use
ODP. The
focus when developing l2fwd_simple was to reduce the code line
count to as
small value as possible, and it turned out it requires 165 lines
of code.
For unidirectional traffic in single-threaded use cases, l2fwd_simple
performs actually better than l2fwd with single thread, because
l2fwd_simple does not need to poll two interfaces in a single thread.
Signed-off-by: Juha-Matti Tilli <juha-matti.ti...@nokia.com
<mailto:juha-matti.ti...@nokia.com>>
Reviewed-by: Petri Savolainen <petri.savolai...@nokia.com
<mailto:petri.savolai...@nokia.com>>
---
configure.ac <http://configure.ac> | 1 +
example/Makefile.am | 2 +-
example/l2fwd_simple/.gitignore | 1 +
example/l2fwd_simple/Makefile.am | 10 ++
example/l2fwd_simple/odp_l2fwd_simple.c | 165
++++++++++++++++++++++++++++++++
5 files changed, 178 insertions(+), 1 deletion(-)
create mode 100644 example/l2fwd_simple/.gitignore
create mode 100644 example/l2fwd_simple/Makefile.am
create mode 100644 example/l2fwd_simple/odp_l2fwd_simple.c
diff --git a/configure.ac <http://configure.ac> b/configure.ac
<http://configure.ac>
index 1aa44d2..2dcddbf 100644
--- a/configure.ac <http://configure.ac>
+++ b/configure.ac <http://configure.ac>
@@ -332,6 +332,7 @@ AC_CONFIG_FILES([Makefile
example/time/Makefile
example/timer/Makefile
example/traffic_mgmt/Makefile
+ example/l2fwd_simple/Makefile
helper/Makefile
helper/test/Makefile
pkgconfig/libodp.pc
diff --git a/example/Makefile.am b/example/Makefile.am
index 906d907..2d425c6 100644
--- a/example/Makefile.am
+++ b/example/Makefile.am
@@ -1 +1 @@
-SUBDIRS = classifier generator ipsec packet time timer traffic_mgmt
+SUBDIRS = classifier generator ipsec packet time timer
traffic_mgmt l2fwd_simple
diff --git a/example/l2fwd_simple/.gitignore
b/example/l2fwd_simple/.gitignore
new file mode 100644
index 0000000..1326732
--- /dev/null
+++ b/example/l2fwd_simple/.gitignore
@@ -0,0 +1 @@
+odp_l2fwd_simple
diff --git a/example/l2fwd_simple/Makefile.am
b/example/l2fwd_simple/Makefile.am
new file mode 100644
index 0000000..88d2915
--- /dev/null
+++ b/example/l2fwd_simple/Makefile.am
@@ -0,0 +1,10 @@
+include $(top_srcdir)/example/Makefile.inc
+
+bin_PROGRAMS = odp_l2fwd_simple$(EXEEXT)
+odp_l2fwd_simple_LDFLAGS = $(AM_LDFLAGS) -static
+odp_l2fwd_simple_CFLAGS = $(AM_CFLAGS) -I${top_srcdir}/example
+
+noinst_HEADERS = \
+ $(top_srcdir)/example/example_debug.h
+
+dist_odp_l2fwd_simple_SOURCES = odp_l2fwd_simple.c
diff --git a/example/l2fwd_simple/odp_l2fwd_simple.c
b/example/l2fwd_simple/odp_l2fwd_simple.c
new file mode 100644
index 0000000..11d342f
--- /dev/null
+++ b/example/l2fwd_simple/odp_l2fwd_simple.c
@@ -0,0 +1,165 @@
+/* Copyright (c) 2016, Linaro Limited
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+
+#include <odp_api.h>
+#include <odp/helper/linux.h>
+#include <odp/helper/eth.h>
+#include <odp/helper/ip.h>
+
+#define POOL_NUM_PKT 8192
+#define POOL_SEG_LEN 1856
+#define MAX_PKT_BURST 32
+
+struct {
+ odp_pktio_t if0, if1;
+ odp_pktin_queue_t if0in, if1in;
+ odp_pktout_queue_t if0out, if1out;
+ odph_ethaddr_t src, dst;
+} global;
+
+static odp_pktio_t create_pktio(const char *name, odp_pool_t pool,
+ odp_pktin_queue_t *pktin,
+ odp_pktout_queue_t *pktout)
+{
+ odp_pktio_param_t pktio_param;
+ odp_pktin_queue_param_t in_queue_param;
+ odp_pktout_queue_param_t out_queue_param;
+ odp_pktio_t pktio;
+
+ odp_pktio_param_init(&pktio_param);
+
+ pktio = odp_pktio_open(name, pool, &pktio_param);
+ if (pktio == ODP_PKTIO_INVALID) {
+ printf("Failed to open %s\n", name);
+ exit(1);
+ }
+
+ odp_pktin_queue_param_init(&in_queue_param);
+ odp_pktout_queue_param_init(&out_queue_param);
+
+ in_queue_param.op_mode = ODP_PKTIO_OP_MT_UNSAFE;
+
+ if (odp_pktin_queue_config(pktio, &in_queue_param)) {
+ printf("Failed to config input queue for %s\n", name);
+ exit(1);
+ }
+
+ out_queue_param.op_mode = ODP_PKTIO_OP_MT_UNSAFE;
+
+ if (odp_pktout_queue_config(pktio, &out_queue_param)) {
+ printf("Failed to config output queue for %s\n",
name);
+ exit(1);
+ }
+
+ if (odp_pktin_queue(pktio, pktin, 1) != 1) {
+ printf("pktin queue query failed for %s\n", name);
+ exit(1);
+ }
+ if (odp_pktout_queue(pktio, pktout, 1) != 1) {
+ printf("pktout queue query failed for %s\n", name);
+ exit(1);
+ }
+ return pktio;
+}
+
+static void *run_worker(void *arg ODP_UNUSED)
+{
+ odp_packet_t pkt_tbl[MAX_PKT_BURST];
+ int pkts, sent, tx_drops, i;
+
+ if (odp_pktio_start(global.if0)) {
+ printf("unable to start input interface\n");
+ exit(1);
+ }
+ printf("started input interface\n");
+ if (odp_pktio_start(global.if1)) {
+ printf("unable to start output interface\n");
+ exit(1);
+ }
+ printf("started output interface\n");
+ printf("started all\n");
+
+ for (;;) {
+ pkts = odp_pktin_recv(global.if0in, pkt_tbl,
MAX_PKT_BURST);
+ if (odp_unlikely(pkts <= 0))
+ continue;
+ for (i = 0; i < pkts; i++) {
+ odp_packet_t pkt = pkt_tbl[i];
+ odph_ethhdr_t *eth;
+
+ if (odp_unlikely(!odp_packet_has_eth(pkt))) {
+ printf("warning: packet has no eth
header\n");
+ return NULL;
+ }
+ eth = (odph_ethhdr_t
*)odp_packet_l2_ptr(pkt, NULL);
+ eth->src = global.src;
+ eth->dst = global.dst;
+ }
+ sent = odp_pktout_send(global.if1out, pkt_tbl, pkts);
+ if (sent < 0)
+ sent = 0;
+ tx_drops = pkts - sent;
+ if (odp_unlikely(tx_drops))
+ odp_packet_free_multi(&pkt_tbl[sent], tx_drops);
+ }
+ return NULL;
+}
+
+int main(int argc, char **argv)
+{
+ odp_pool_t pool;
+ odp_pool_param_t params;
+ odp_cpumask_t cpumask;
+ odph_linux_pthread_t thd;
+
+ if (argc != 5 ||
+ odph_eth_addr_parse(&global.dst, argv[3]) != 0 ||
+ odph_eth_addr_parse(&global.src, argv[4]) != 0) {
+ printf("Usage: odp_l2fwd_simple eth0 eth1
01:02:03:04:05:06"
+ " 07:08:09:0a:0b:0c\n");
+ printf("Where eth0 and eth1 are the used interfaces"
+ " (must have 2 of them)\n");
+ printf("And the hexadecimal numbers are
destination MAC address"
+ " and source MAC address\n");
+ exit(1);
+ }
+
+ if (odp_init_global(NULL, NULL)) {
+ printf("Error: ODP global init failed.\n");
+ exit(1);
+ }
+
+ if (odp_init_local(ODP_THREAD_CONTROL)) {
+ printf("Error: ODP local init failed.\n");
+ exit(1);
+ }
+
+ /* Create packet pool */
+ odp_pool_param_init(¶ms);
+ params.pkt.seg_len = POOL_SEG_LEN;
+ params.pkt.len = POOL_SEG_LEN;
+ params.pkt.num = POOL_NUM_PKT;
+ params.type = ODP_POOL_PACKET;
+
+ pool = odp_pool_create("packet pool", ¶ms);
+
+ if (pool == ODP_POOL_INVALID) {
+ printf("Error: packet pool create failed.\n");
+ exit(1);
+ }
+
+ global.if0 = create_pktio(argv[1], pool, &global.if0in,
&global.if0out);
+ global.if1 = create_pktio(argv[2], pool, &global.if1in,
&global.if1out);
+
+ odp_cpumask_default_worker(&cpumask, 1);
+ odph_linux_pthread_create(&thd, &cpumask, run_worker, NULL,
+ ODP_THREAD_WORKER);
+ odph_linux_pthread_join(&thd, 1);
+ return 0;
+}
--
2.1.4
_______________________________________________
lng-odp mailing list
lng-odp@lists.linaro.org <mailto:lng-odp@lists.linaro.org>
https://lists.linaro.org/mailman/listinfo/lng-odp
_______________________________________________
lng-odp mailing list
lng-odp@lists.linaro.org
https://lists.linaro.org/mailman/listinfo/lng-odp