Thanks for fixing this. For this series:
Reviewed-by: Bill Fischofer <[email protected]
<mailto:[email protected]>>
On Wed, Apr 27, 2016 at 1:53 AM, Matias Elo <[email protected]
<mailto:[email protected]>> wrote:
Signed-off-by: Matias Elo <[email protected]
<mailto:[email protected]>>
---
include/odp/api/spec/atomic.h | 4 ++--
include/odp/api/spec/barrier.h | 2 +-
include/odp/api/spec/buffer.h | 4 +++-
include/odp/api/spec/classification.h | 6 +++---
include/odp/api/spec/config.h | 2 +-
include/odp/api/spec/crypto.h | 4 ++--
include/odp/api/spec/hints.h | 4 ++--
include/odp/api/spec/packet_io.h | 8 ++++----
include/odp/api/spec/packet_io_stats.h | 4 ++--
include/odp/api/spec/queue.h | 4 ++--
include/odp/api/spec/rwlock.h | 2 +-
include/odp/api/spec/schedule.h | 2 +-
include/odp/api/spec/schedule_types.h | 2 +-
include/odp/api/spec/traffic_mngr.h | 24 ++++++++++++------------
14 files changed, 37 insertions(+), 35 deletions(-)
diff --git a/include/odp/api/spec/atomic.h
b/include/odp/api/spec/atomic.h
index 7638b93..36c50cb 100644
--- a/include/odp/api/spec/atomic.h
+++ b/include/odp/api/spec/atomic.h
@@ -116,7 +116,7 @@ void odp_atomic_add_u32(odp_atomic_u32_t
*atom, uint32_t val);
* Fetch and subtract from atomic uint32 variable
*
* @param atom Pointer to atomic variable
- * @param val Value to be subracted from the variable
+ * @param val Value to be subtracted from the variable
*
* @return Value of the variable before the subtraction
*/
@@ -609,7 +609,7 @@ typedef union odp_atomic_op_t {
* variables instead of uint64 to optimize performance on
platforms that
* implement a performance critical operation using locks.
*
- * Init operations (e.g. odp_atomic_init_64()) are not atomic.
This function
+ * Init operations (e.g. odp_atomic_init_u64()) are not atomic.
This function
* clears the op.init bit but will never set it to one.
*
* @param atomic_op Pointer to atomic operation structure for
storing
diff --git a/include/odp/api/spec/barrier.h
b/include/odp/api/spec/barrier.h
index 01e3dc7..fbd1072 100644
--- a/include/odp/api/spec/barrier.h
+++ b/include/odp/api/spec/barrier.h
@@ -21,7 +21,7 @@ extern "C" {
/**
* @defgroup odp_barrier ODP BARRIER
- * Thread excution and memory ordering barriers.
+ * Thread execution and memory ordering barriers.
*
* @details
* <b> Thread execution barrier (odp_barrier_t) </b>
diff --git a/include/odp/api/spec/buffer.h
b/include/odp/api/spec/buffer.h
index ddadc69..5c632b5 100644
--- a/include/odp/api/spec/buffer.h
+++ b/include/odp/api/spec/buffer.h
@@ -96,7 +96,9 @@ odp_pool_t odp_buffer_pool(odp_buffer_t buf);
/**
* Buffer alloc
*
- * The validity of a buffer can be cheked at any time with
odp_buffer_is_valid()
+ * The validity of a buffer can be checked at any time with
+ * odp_buffer_is_valid().
+ *
* @param pool Pool handle
*
* @return Handle of allocated buffer
diff --git a/include/odp/api/spec/classification.h
b/include/odp/api/spec/classification.h
index 1603d16..4891d26 100644
--- a/include/odp/api/spec/classification.h
+++ b/include/odp/api/spec/classification.h
@@ -109,7 +109,7 @@ typedef union odp_cls_pmr_terms_t {
/**
* Classification capabilities
- * This capability structure defines system level classfication
capability
+ * This capability structure defines system level classification
capability
*/
typedef struct odp_cls_capability_t {
/** PMR terms supported by the classifier
@@ -389,7 +389,7 @@ typedef struct odp_pmr_param_t {
} odp_pmr_param_t;
/**
- * Intiailize packet matching rule parameters
+ * Initialize packet matching rule parameters
*
* Initialize an odp_pmr_param_t to its default values for all fields
*
@@ -461,7 +461,7 @@ int odp_cls_cos_pool_set(odp_cos_t cos_id,
odp_pool_t pool_id);
*
* @retval pool handle of the associated pool
* @retval ODP_POOL_INVALID if no associated pool found or
-* incase of an error
+* in case of an error
*/
odp_pool_t odp_cls_cos_pool(odp_cos_t cos_id);
diff --git a/include/odp/api/spec/config.h
b/include/odp/api/spec/config.h
index 7a2d18b..4af3036 100644
--- a/include/odp/api/spec/config.h
+++ b/include/odp/api/spec/config.h
@@ -59,7 +59,7 @@ int odp_config_sched_prios(void);
/**
* Number of scheduling groups
- * @return Number of scheduling groups supported by this platofmr
+ * @return Number of scheduling groups supported by this platform
*/
int odp_config_sched_grps(void);
diff --git a/include/odp/api/spec/crypto.h
b/include/odp/api/spec/crypto.h
index 3e78547..db01684 100644
--- a/include/odp/api/spec/crypto.h
+++ b/include/odp/api/spec/crypto.h
@@ -316,10 +316,10 @@ typedef struct odp_crypto_capability_t {
/** Maximum number of crypto sessions */
uint32_t max_sessions;
- /** Supported chipher algorithms */
+ /** Supported cipher algorithms */
odp_crypto_cipher_algos_t chiphers;
- /** Chipher algorithms implemented with HW offload */
+ /** Cipher algorithms implemented with HW offload */
odp_crypto_cipher_algos_t hw_chiphers;
/** Supported authentication algorithms */
diff --git a/include/odp/api/spec/hints.h
b/include/odp/api/spec/hints.h
index 158f802..ff5099c 100644
--- a/include/odp/api/spec/hints.h
+++ b/include/odp/api/spec/hints.h
@@ -26,7 +26,7 @@ extern "C" {
#ifdef __GNUC__
-/** Define a fn that does not return
+/** Define a function that does not return
*/
#define ODP_NORETURN __attribute__((__noreturn__))
@@ -57,7 +57,7 @@ extern "C" {
#define ODP_DEPRECATED __attribute__((__deprecated__))
/**
- * Intentionally unused variables ot functions
+ * Intentionally unused variables of functions
*/
#define ODP_UNUSED __attribute__((__unused__))
diff --git a/include/odp/api/spec/packet_io.h
b/include/odp/api/spec/packet_io.h
index c1c14b2..6fc9644 100644
--- a/include/odp/api/spec/packet_io.h
+++ b/include/odp/api/spec/packet_io.h
@@ -257,7 +257,7 @@ typedef struct odp_pktio_param_t {
* enabled, implementation will verify checksum correctness on
incoming packets
* and depending on drop configuration either deliver erroneous
packets with
* appropriate flags set (e.g. odp_packet_has_l3_error()) or drop
those.
- * When packet droping is enabled, application will never receive
a packet
+ * When packet dropping is enabled, application will never
receive a packet
* with the specified error and may avoid to check the error flag.
*/
typedef union odp_pktin_config_opt_t {
@@ -683,7 +683,7 @@ int odp_pktio_stop(odp_pktio_t pktio);
* Close a stopped packet IO interface. This call frees all
remaining packets
* stored in pktio receive and transmit side buffers. The pktio
is destroyed
* and the handle must not be used for other calls. After a
successful call,
- * the same pktio device can be opened again with a
odp_packet_open() call.
+ * the same pktio device can be opened again with a
odp_pktio_open() call.
*
* @param pktio Packet IO handle
*
@@ -755,7 +755,7 @@ int odp_pktin_recv_tmo(odp_pktin_queue_t
queue, odp_packet_t packets[],
* Receives up to 'num' packets from one of the specified pktio
interface input
* queues. The index of the source queue is stored into 'from' output
* parameter. If there are no packets available on any of the
queues, waits for
- * packets depeding on 'wait' parameter value. Returns the number
of packets
+ * packets depending on 'wait' parameter value. Returns the
number of packets
* received.
*
* When an input queue has been configured with 'op_mode' value
@@ -947,7 +947,7 @@ int odp_pktio_index(odp_pktio_t pktio);
uint64_t odp_pktio_to_u64(odp_pktio_t pktio);
/**
- * Intiailize pktio params
+ * Initialize pktio params
*
* Initialize an odp_pktio_param_t to its default values for all
fields
*
diff --git a/include/odp/api/spec/packet_io_stats.h
b/include/odp/api/spec/packet_io_stats.h
index e0a6547..73cf704 100644
--- a/include/odp/api/spec/packet_io_stats.h
+++ b/include/odp/api/spec/packet_io_stats.h
@@ -25,7 +25,7 @@ extern "C" {
/**
* Packet IO statistics
*
- * Packet IO statictics counters follow RFCs for Management
Information Base
+ * Packet IO statistics counters follow RFCs for Management
Information Base
* (MIB)for use with network management protocols in the Internet
community:
* https://tools.ietf.org/html/rfc3635
* https://tools.ietf.org/html/rfc2863
@@ -48,7 +48,7 @@ typedef struct odp_pktio_stats_t {
/**
* The number of inbound packets which were chosen to be
discarded
- * even though no errors had been detected to preven their
being
+ * even though no errors had been detected to prevent
their being
* deliverable to a higher-layer protocol. One possible
reason for
* discarding such a packet could be to free up buffer space.
* See ifInDiscards in RFC 2863.
diff --git a/include/odp/api/spec/queue.h
b/include/odp/api/spec/queue.h
index 7cc031d..f1d0e10 100644
--- a/include/odp/api/spec/queue.h
+++ b/include/odp/api/spec/queue.h
@@ -110,14 +110,14 @@ typedef struct odp_queue_param_t {
*
* Default value for both queue types is ODP_QUEUE_OP_MT.
Application
* may enable performance optimizations by defining
MT_UNSAFE or
- * DISABLED modes when applicaple. */
+ * DISABLED modes when applicable. */
odp_queue_op_mode_t enq_mode;
/** Dequeue mode
*
* For PLAIN queues, the default value is
ODP_QUEUE_OP_MT. Application
* may enable performance optimizations by defining
MT_UNSAFE or
- * DISABLED modes when applicaple. However, when a plain
queue is input
+ * DISABLED modes when applicable. However, when a plain
queue is input
* to the implementation (e.g. a queue for packet
output), the
* parameter is ignored in queue creation and the value is
* ODP_QUEUE_OP_DISABLED.
diff --git a/include/odp/api/spec/rwlock.h
b/include/odp/api/spec/rwlock.h
index 631df48..2624b56 100644
--- a/include/odp/api/spec/rwlock.h
+++ b/include/odp/api/spec/rwlock.h
@@ -25,7 +25,7 @@ extern "C" {
*
* A reader/writer lock allows multiple simultaneous readers but
only one
* writer at a time. A thread that wants write access will have
to wait until
- * there are no threads that want read access. This casues a risk for
+ * there are no threads that want read access. This causes a risk for
* starvation. The trylock variants can be used to avoid blocking
when
* the lock is not immediately available.
* @{
diff --git a/include/odp/api/spec/schedule.h
b/include/odp/api/spec/schedule.h
index a720e03..556d0f1 100644
--- a/include/odp/api/spec/schedule.h
+++ b/include/odp/api/spec/schedule.h
@@ -259,7 +259,7 @@ odp_schedule_group_t
odp_schedule_group_lookup(const char *name);
*
* Join a threadmask to an existing schedule group
*
- * @param group Schdule group handle
+ * @param group Schedule group handle
* @param mask Thread mask
*
* @retval 0 on success
diff --git a/include/odp/api/spec/schedule_types.h
b/include/odp/api/spec/schedule_types.h
index b394d53..6a4d01c 100644
--- a/include/odp/api/spec/schedule_types.h
+++ b/include/odp/api/spec/schedule_types.h
@@ -45,7 +45,7 @@ extern "C" {
/**
* @def ODP_SCHED_PRIO_DEFAULT
* Default scheduling priority. User does not care about the
selected priority
- * level - throughput, load balacing and synchronization features
are more
+ * level - throughput, load balancing and synchronization
features are more
* important than priority scheduling.
*/
diff --git a/include/odp/api/spec/traffic_mngr.h
b/include/odp/api/spec/traffic_mngr.h
index fff4c46..fbd15e4 100644
--- a/include/odp/api/spec/traffic_mngr.h
+++ b/include/odp/api/spec/traffic_mngr.h
@@ -98,13 +98,13 @@ extern "C" {
/**
* @def ODP_TM_MIN_SHAPER_BW
- * The largest amound of bandwidth that any shaper's peak or
commit rate can
+ * The largest amount of bandwidth that any shaper's peak or
commit rate can
* be set to. It is in units of 1000 bytes/second.
*/
/**
* @def ODP_TM_MAX_SHAPER_BW
- * The largest amound of bandwidth that any shaper's peak or
commit rate can
+ * The largest amount of bandwidth that any shaper's peak or
commit rate can
* be set to. It is in units of 1000 bytes/second.
*/
@@ -192,7 +192,7 @@ extern "C" {
/** Per Level Capabilities
*
- * The odp_tm_level_capabilities_t record is used to describe the
capabalities
+ * The odp_tm_level_capabilities_t record is used to describe the
capabilities
* that might vary based upon the tm_node level. It is always
used as
* part of the odp_tm_capabilities record. */
typedef struct {
@@ -254,7 +254,7 @@ typedef struct {
typedef struct {
/** The name is an optional name associated with a
capabilities
* record. This name, if present, can be used by
odp_tm_find to
- * return a TM system matching this set of capabilitis. */
+ * return a TM system matching this set of capabilities. */
char *name;
/** max_tm_queues specifies the maximum number of
tm_queues that can
@@ -480,7 +480,7 @@ void odp_tm_egress_init(odp_tm_egress_t *egress);
* that N is larger than the capabilities_size, N will still be
returned,
* but only capabilities_size records will be filled in.
*
- * @param[out] capabilities An arary of
odp_tm_capabilities_t records to
+ * @param[out] capabilities An array of
odp_tm_capabilities_t records to
* be filled in.
* @param[in] capabilities_size The number of
odp_tm_capabilities_t records
* in the capabilities array.
@@ -520,7 +520,7 @@ odp_tm_t odp_tm_create(const char *name,
* "HW_TM_%u" where the number starts at 1, can be used to find a
built-in
* system independently of the best requirements match. If name
is NULL then
* the existing (built-in or created by odp_tm_create) TM system
that best
- * matches the requirments is returned.
+ * matches the requirements is returned.
*
* @param[in] name If NULL then only uses the
requirements parameter to
* find a closest match, otherwise if
the name is
@@ -593,7 +593,7 @@ int odp_tm_destroy(odp_tm_t odp_tm);
/** Vlan Marking.
*
- * The odp_tm_vlan__marking() function allows one to configure
the TM egress
+ * The odp_tm_vlan_marking() function allows one to configure the
TM egress
* so as to have it set the one bit VLAN Drop Eligibility
Indicator (DEI)
* field (but only for pkts that already carry a VLAN tag) of a
pkt based upon
* the final pkt (or shaper?) color assigned to the pkt when it
reaches the
@@ -932,7 +932,7 @@ odp_tm_threshold_t
odp_tm_threshold_create(const char *name,
/** Destroy a queue threshold profile object
*
* The odp_tm_threshold_destroy() function destroys/frees the
given threshold
- * profile object. It is an error if this thresold profile is
still being
+ * profile object. It is an error if this threshold profile is
still being
* referenced by an active (connected) tm_queue or tm_node.
*
* @param[in] threshold_profile Specifies the queue thresholds
profile
@@ -1129,7 +1129,7 @@ typedef struct {
* the odp_tm_node_context() call. */
void *user_context;
- /** The max_fan_in sets tha maximum number of src
tm_queues and
+ /** The max_fanin sets the maximum number of src tm_queues and
* producer tm_nodes that can be simultaneously be
connected to this
* tm_node as their destination. */
uint32_t max_fanin;
@@ -1406,7 +1406,7 @@ int
odp_tm_queue_shaper_config(odp_tm_queue_t tm_queue,
* @param[in] tm_node Specifies the tm_node to be changed.
* @param[in] tm_fan_in_queue Specifies which of the specified
tm_node's
* fan-in's weights etc are to be
changed. The
- * fan-in is indentified by the
"producer"/parent
+ * fan-in is identified by the
"producer"/parent
* tm_queue actually connected to this
fan-in.
* @param[in] sched_profile Specifies the scheduler profile
that should
* now be used for the WFQ/RR entity
within the
@@ -1481,7 +1481,7 @@ int odp_tm_node_connect(odp_tm_node_t
src_tm_node, odp_tm_node_t dst_tm_node);
*/
int odp_tm_node_disconnect(odp_tm_node_t src_tm_node);
-/** The odp_queue_connect() function connects the indicated
tm_queue to a
+/** The odp_tm_queue_connect() function connects the indicated
tm_queue to a
* parent tm_node or to the egress/root node. The tm_queue will
then become
* one of the dst node's fan-in set.
*
@@ -1614,7 +1614,7 @@ typedef struct {
/** Get tm_node Fanin Info
*
- * The odp_tm_node_fain_info() function is used to extract
various bits of
+ * The odp_tm_node_fanin_info() function is used to extract
various bits of
* configuration associated with a given tm_node's fanin. It can
also be
* used to walk the complete fanin list of a given tm_node. Note
in particular
* that the odp_tm_node_fanin_info_t record passed to this
function is both
--
1.9.1
_______________________________________________
lng-odp mailing list
[email protected] <mailto:[email protected]>
https://lists.linaro.org/mailman/listinfo/lng-odp
_______________________________________________
lng-odp mailing list
[email protected]
https://lists.linaro.org/mailman/listinfo/lng-odp
