Hi Bill, could you clarify if this "device" is related to devicetree as defined by Linaro (https://github.com/devicetree-org/devicetree-specification) or the devices that are in the scope of Christophe Millard, or some other device concept ?
FF On 6 December 2016 at 04:43, Bill Fischofer <bill.fischo...@linaro.org> wrote: > Ping. v3 of this patch is still awaiting review. > > On Mon, Oct 24, 2016 at 4:29 PM, Bill Fischofer > <bill.fischo...@linaro.org> wrote: > > Add the odp_dev_id() API used for NUMA support > > > > Signed-off-by: Bill Fischofer <bill.fischo...@linaro.org> > > --- > > Changes for v3: > > - Correct ODP_DEV_ANY to ODP_DEV_DEFAULT > > > > Changes for v2: > > - Incorporate changes suggested by Petri > > > > include/odp/api/spec/dev.h | 89 ++++++++++++++++++++++++++++++ > ++++++++++++++++ > > 1 file changed, 89 insertions(+) > > create mode 100644 include/odp/api/spec/dev.h > > > > diff --git a/include/odp/api/spec/dev.h b/include/odp/api/spec/dev.h > > new file mode 100644 > > index 0000000..76d861a > > --- /dev/null > > +++ b/include/odp/api/spec/dev.h > > @@ -0,0 +1,89 @@ > > +/* Copyright (c) 2016, Linaro Limited > > + * All rights reserved. > > + * > > + * SPDX-License-Identifier: BSD-3-Clause > > + */ > > + > > +/** > > + * @file > > + * > > + * ODP device > > + */ > > + > > +#ifndef ODP_API_DEV_H_ > > +#define ODP_API_DEV_H_ > > +#include <odp/visibility_begin.h> > > + > > +#ifdef __cplusplus > > +extern "C" { > > +#endif > > + > > +#include <odp/api/std_types.h> > > + > > +/** @defgroup odp_dev ODP DEVICE > > + * Operations on devices > > + * @{ > > + */ > > + > > +/** > > + * @typedef odp_dev_t > > + * ODP Device > > + */ > > + > > +/** > > + * @def ODP_DEV_NAME_LEN > > + * Maximum device name length in chars > > + */ > > + > > +/** > > + * @def ODP_DEV_DEFAULT > > + * Default device > > + */ > > + > > +/** > > + * @def ODP_DEV_INVALID > > + * Invalid device > > + */ > > + > > +/** > > + * Get Device ID by Name > > + * > > + * Get an implementation-defined device identifier from a device name. > Device > > + * names are supplied as parameter info (command line, file, etc.) to > the > > + * application. This routine translates this symbolic name into an > internal > > + * identifier that can be used to define a device connection hierarchy > for > > + * NUMA or other purposes. > > + * > > + * The reserved id ODP_DEV_DEFAULT may be used as a "don't care" > placeholder > > + * wherever a device id is required. > > + * > > + * @param name Name of the device > > + * > > + * @return Device ID > > + * @retval ODP_DEV_INVALID Device is unknown > > + */ > > +odp_dev_t odp_dev_id(const char *name); > > + > > +/** > > + * Get printable value for an odp_dev_t > > + * > > + * @param hdl odp_dev_t handle to be printed > > + * @return uint64_t value that can be used to print/display this > > + * handle > > + * > > + * @note This routine is intended to be used for diagnostic purposes > > + * to enable applications to generate a printable value that represents > > + * an odp_dev_t handle. > > + */ > > +uint64_t odp_dev_to_u64(odp_dev_t hdl); > > + > > +/** > > + * @} > > + */ > > + > > +#ifdef __cplusplus > > +} > > +#endif > > + > > +#include <odp/visibility_end.h> > > +#endif > > -- > > 2.7.4 > > > -- [image: Linaro] <http://www.linaro.org/> François-Frédéric Ozog | *Director Linaro Networking Group* T: +33.67221.6485 francois.o...@linaro.org | Skype: ffozog