From: Petri Savolainen <petri.savolai...@linaro.org> Application may need help on packet parsing e.g. after decrypt or IP reassembly of a packet. Application specifies from where to start and where to stop parsing. Implementation may be vectorized (more efficient) when multiple packets are parsed together with the same parse requirements.
Signed-off-by: Petri Savolainen <petri.savolai...@linaro.org> --- /** Email created from pull request 273 (psavol:next-packet-parse) ** https://github.com/Linaro/odp/pull/273 ** Patch: https://github.com/Linaro/odp/pull/273.patch ** Base sha: d22c949cc466bf28de559855a1cb525740578137 ** Merge commit sha: 5ed52232b041f855c0e109143480b16ea467c7da **/ include/odp/api/spec/packet.h | 119 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 119 insertions(+) diff --git a/include/odp/api/spec/packet.h b/include/odp/api/spec/packet.h index 3fc460641..b3f946fc0 100644 --- a/include/odp/api/spec/packet.h +++ b/include/odp/api/spec/packet.h @@ -72,6 +72,45 @@ extern "C" { */ /** + * Protocol + */ +typedef enum odp_proto_t { + /** No protocol defined */ + ODP_PROTO_NONE = 0, + + /** Ethernet (including VLAN) */ + ODP_PROTO_ETH, + + /** IP version 4 */ + ODP_PROTO_IPV4, + + /** IP version 6 */ + ODP_PROTO_IPV6 + +} odp_proto_t; + +/** + * Protocol layer + */ +typedef enum odp_proto_layer_t { + /** No layers */ + ODP_PROTO_LAYER_NONE = 0, + + /** Layer L2 protocols (Ethernet, VLAN, etc) */ + ODP_PROTO_LAYER_L2, + + /** Layer L3 protocols (IPv4, IPv6, ICMP, IPSEC, etc) */ + ODP_PROTO_LAYER_L3, + + /** Layer L4 protocols (UDP, TCP, SCTP) */ + ODP_PROTO_LAYER_L4, + + /** All layers */ + ODP_PROTO_LAYER_ALL + +} odp_proto_layer_t; + +/** * Packet API data range specifier */ typedef struct odp_packet_data_range { @@ -1140,6 +1179,86 @@ int odp_packet_move_data(odp_packet_t pkt, uint32_t dst_offset, */ /** + * Packet parse parameters + */ +typedef struct odp_packet_parse_param_t { + /** Protocol header at parse starting point. Valid values for this + * field are: ODP_PROTO_ETH, ODP_PROTO_IPV4, ODP_PROTO_IPV6. */ + odp_proto_t proto; + + /** Continue parsing until this layer. Must be the same or higher + * layer than the layer of 'proto'. */ + odp_proto_layer_t layer; + + /** Flags to control payload data checks up to the selected parse + * layer. Checksum checking status can be queried for each packet with + * odp_packet_l3_chksum_status() and odp_packet_l4_chksum_status(). + */ + union { + struct { + /** Check IPv4 header checksum */ + uint32_t ipv4_chksum : 1; + + /** Check UDP checksum */ + uint32_t udp_chksum : 1; + + /** Check TCP checksum */ + uint32_t tcp_chksum : 1; + + /** Check SCTP checksum */ + uint32_t sctp_chksum : 1; + + } check; + + /** All check bits. This can be used to set/clear all flags. */ + uint32_t all_check; + }; + +} odp_packet_parse_param_t; + +/** + * Parse packet + * + * Parse protocol headers in packet data. Parsing starts at 'offset', which + * is the first header byte of protocol 'param.proto'. Parameter 'param.layer' + * defines the last layer application is interested about. + * Use ODP_PROTO_LAYER_ALL for all layers. A successful operation sets or resets + * packet metadata for all layers from the layer of 'param.proto' to the + * application defined last layer. Metadata of other layers have undefined + * values. When operation fails, metadata of all protocol layers have undefined + * values. + * + * @param pkt Packet handle + * @param offset Byte offset into the packet + * @param param Parse parameters. Proto and layer fields must be set. Clear + * all check bits that are not used. + * + * @retval 0 on success + * @retval <0 on failure + */ +int odp_packet_parse(odp_packet_t pkt, uint32_t offset, + const odp_packet_parse_param_t *param); + +/** + * Parse multiple packets + * + * Otherwise like odp_packet_parse(), but parses multiple packets. Packets may + * have unique offsets, but must start with the same protocol. Also, packets are + * parsed up to the same protocol layer. + * + * @param pkt Packet handle array + * @param offset Byte offsets into the packets + * @param num Number of packets and offsets + * @param param Parse parameters. Proto and layer fields must be set. Clear + * all check bits that are not used. + * + * @return Number of packets parsed successfully (0 ... num) + * @retval <0 on failure + */ +int odp_packet_parse_multi(const odp_packet_t pkt[], const uint32_t offset[], + int num, const odp_packet_parse_param_t *param); + +/** * Packet pool * * Returns handle to the packet pool where the packet was allocated from.