Andreas Pettersson wrote:
> Hej!
>
> Samba fungerar fint nu... men jag har fortfarande tv� problem kvar.
>
> Vid uppstart f�r jag ett meddelande om att st�d f�r "fs type devpts"
> saknas, har jag gl�mt att kompliera in n�t i k�rnan? Vad?
>
> Ett annat problem �r att inte X startar. Jag f�r f�ljande meddelande:
>
> _XSERVTransSocketOpen: socket() failed for local
> _XSERVTransSocketOpenCOTSServer: Unable to open socket for local
> _XSERVTransOpen: transport open failed for local/server.pettersson.se:0
> _XSERVTransMakeAllCOTSServerListeners: failed to open listener for local
> _X11TransSocketOpen: socket() failed for local
> _X11TransSocketOpenCOTSClient: Unable to open socket for local
> _X11TransOpen: transport open failed for local/server.pettersson.se:0
>
> waiting for X server to begin accepting connections
> XFree86 Version 3.3.5 / X Window System
> (protocol Version 11, revision 0, vendor release 6300)
> Release Date: August 23 1999
> If the server is older than 6-12 months, or if your card is
> newer
> than the above date, look for a newer version before reporting
> problems. (see http://www.XFree86.Org/FAQ)
> Operating System: Linux 2.2.5-22smp i686 [ELF]
> Configured drivers:
> S3: accelerated server for S3 graphics adaptors (Patchlevel 0)
> newmmio, mmio_928, s3_generic
> (using VT number 7)
>
> XF86Config: /usr/X11R6/lib/X11/XF86Config
> (**) stands for supplied, (--) stands for probed/default values
> (**) XKB: keycodes: "xfree86"
> (**) XKB: types: "default"
> (**) XKB: compat: "default"
> (**) XKB: symbols: "us(pc101)"
> (**) XKB: geometry: "pc"
> (**) XKB: rules: "xfree86"
> (**) XKB: model: "pc101"
> (**) XKB: layout: "se"
> (**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200
> (**) Mouse: buttons: 3, 3 button emulation (timeout: 50ms)
> (**) S3: Graphics device ID: "S3 Inc.|86c764/765 [Trio32/64/64V+]"
> (**) S3: Monitor ID: "My Monitor"
> (--) S3: Mode "800x600" needs hsync freq of 35.16 kHz. Deleted.
> (--) S3: Mode "1024x768" needs hsync freq of 35.52 kHz. Deleted.
> (--) S3: Mode "640x400" needs hsync freq of 37.86 kHz. Deleted.
> (--) S3: Mode "640x480" needs hsync freq of 36.46 kHz. Deleted.
> (--) S3: Mode "640x480" needs hsync freq of 37.50 kHz. Deleted.
> (--) S3: Mode "800x600" needs hsync freq of 37.88 kHz. Deleted.
> (--) S3: Mode "640x480" needs hsync freq of 43.27 kHz. Deleted.
> (--) S3: Mode "1152x864" needs hsync freq of 43.92 kHz. Deleted.
> (--) S3: Mode "800x600" needs hsync freq of 48.08 kHz. Deleted.
> (--) S3: Mode "1024x768" needs hsync freq of 48.36 kHz. Deleted.
> (--) S3: Mode "640x480" needs hsync freq of 53.01 kHz. Deleted.
> (--) S3: Mode "1152x864" needs hsync freq of 53.51 kHz. Deleted.
> (--) S3: Mode "800x600" needs hsync freq of 55.84 kHz. Deleted.
> (--) S3: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
> (--) S3: Mode "1280x1024" needs hsync freq of 51.02 kHz. Deleted.
> (--) S3: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted.
> (--) S3: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
> (--) S3: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted.
> (--) S3: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
> (--) S3: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
> (--) S3: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.
> (--) S3: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
> (--) S3: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
> (--) S3: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
> (--) S3: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
> (--) S3: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
> (--) S3: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
> (--) S3: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
> (--) S3: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
> (--) S3: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
> (--) S3: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
> (--) S3: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
> (--) S3: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
> (--) S3: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
> (--) S3: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
> (--) S3: Mode "512x384" needs vert refresh rate of 77.97 Hz. Deleted.
> (--) S3: Mode "512x384" needs hsync freq of 34.38 kHz. Deleted.
> (--) S3: Mode "320x240" needs hsync freq of 39.38 kHz. Deleted.
> (--) S3: Mode "400x300" needs hsync freq of 35.16 kHz. Deleted.
> (--) S3: Mode "400x300" needs hsync freq of 37.88 kHz. Deleted.
> (--) S3: Mode "400x300" needs hsync freq of 48.08 kHz. Deleted.
> (--) S3: Mode "480x300" needs hsync freq of 35.16 kHz. Deleted.
> (--) S3: Mode "480x300" needs hsync freq of 37.80 kHz. Deleted.
> (--) S3: Mode "480x300" needs hsync freq of 39.56 kHz. Deleted.
> (--) S3: Mode "480x300" needs hsync freq of 48.00 kHz. Deleted.
> (**) FontPath set to "unix/:-1"
> (--) S3: PCI: Trio32/64 rev 54, Linear FB @ 0xe0000000
> (--) S3: chipset: Trio64V+ rev. 54
> (--) S3: chipset driver: newmmio
> (--) S3: card type: PCI
> (--) S3: videoram: 2048k
> (--) S3: Ramdac type: s3_trio64
> (--) S3: Ramdac speed: 135 MHz
> (--) S3: Using Trio32/64 programmable clock (MCLK 59.957 MHz)
> (--) S3: Maximum allowed dot-clock: 135.000 MHz
> (**) S3: Mode "640x480": mode clock = 25.175
> (--) S3: Using 6 bits per RGB value
> (--) S3: Virtual resolution set to 640x480
> (--) S3: Local bus LAW is 0xE0000000
> (--) S3: Using a banksize of 2048k, line width of 640
> (--) S3: Using a single 64x64 area at (576,482) for expanding pixmaps
> (--) S3: Using 8 planes of 640x2730 at (0,546) aligned 8 as font cache
> ._FontTransSocketOpen: socket() failed for unix
> _FontTransSocketOpenCOTSClient: Unable to open socket for unix
> _FontTransOpen: transport open failed for unix/server.pettersson.se:-1
> failed to set default font path 'unix/:-1'
> Fatal server error:
> could not open default font 'fixed'
>
> When reporting a problem related to a server crash, please send
> the full server output, not just the last messages
>
> _X11TransSocketOpen: socket() failed for local
> _X11TransSocketOpenCOTSClient: Unable to open socket for local
> _X11TransOpen: transport open failed for local/server.pettersson.se:0
> ..
> _X11TransSocketOpen: socket() failed for local
> _X11TransSocketOpenCOTSClient: Unable to open socket for local
> _X11TransOpen: transport open failed for local/server.pettersson.se:0
> giving up.
> xinit: Invalid argument (errno 22): unable to connect to X server
> xinit: No such process (errno 3): Server error.
>
> Jag k�r RedHat 6.1 med kernel 2.2.12 och S3Trio64V+ grafikkort
>
> Hoppas n�n kan hj�lpa mig!
>
> H�lsninar
> ANDREAS
>
> ======Annons================================================
> === V�rldens minsta Linux workstation?
> === Nu med Linux DeLuxe V6.5 http://www.svithiod.com
> ============================================================
Ojoj, det d�r problemet fick jag ocks�, fast med 2.2.13 k�rnan, men jag
hade redan s� mycket kr�ngel, s� jag installerade bara om allt, det
konstiga med det d�r var v�l �nd� det att om jag startade med min gamla
kernel s� funkade det.
Mikael Jacobson
======Annons================================================
=== V�rldens minsta Linux workstation?
=== Nu med Linux DeLuxe V6.5 http://www.svithiod.com
============================================================
