actclark wrote:
> 
> You can also telnet to the JetDirect Interface and change that access lists.
> (some older jetdirects don't support 'allow')
> Once you are there hit enter a couple of times and you will see a ">"
> prompt.  Type ? for help  Also note that if you don't set a password at the
> telnet interface, anyone could telnet into the JetDirect card and change the
> lists as well as lock you out or change the ip of the printer. . . you get
> the idea.

Even if a password has been set, it offers little security. If one
sends:-

%-12345X@PJL JOB 
@PJL DEFAULT PASSWORD = 
@PJL EOJ 
%-12345X


the password will be happily deleted, and access will be allowed to
all.......

Mike.

-----------------------------------------------------------------------------
YOU MUST BE A LIST MEMBER IN ORDER TO POST TO THE LPRNG MAILING LIST
The address you post from MUST be your subscription address

If you need help, send email to [EMAIL PROTECTED] (or lprng-requests
or lprng-digest-requests) with the word 'help' in the body.  For the impatient,
to subscribe to a list with name LIST,  send mail to [EMAIL PROTECTED]
with:                           | example:
subscribe LIST <mailaddr>       |  subscribe lprng-digest [EMAIL PROTECTED]
unsubscribe LIST <mailaddr>     |  unsubscribe lprng [EMAIL PROTECTED]

If you have major problems,  send email to [EMAIL PROTECTED] with the word
LPRNGLIST in the SUBJECT line.
-----------------------------------------------------------------------------

Reply via email to