hi,
reenable the force_localhost in the lpd.conf and change the printcap
entry
:[EMAIL PROTECTED] to
:[EMAIL PROTECTED]
this is usually the listening port of the lpd on HP printers
make an lpc reread and everything should run fine :-)
regards
~christoph
[EMAIL PROTECTED] schrieb:
>
> I compiled lprng using:
>
> ./configure --disable-gdbm --prefix=/usr --sysconfdir=/etc
>
> It compiled successfully, I installed it, and began running through
> the printcap tutorial.
> I am setting up what I suspect is becoming the norm in many
> large organizations, several printers that are directly attached to
> the network, running their own lpd emulators.
>
> I created the following:
>
> pq_grunts
> :sd=/var/spool/lpd/%P
> :[EMAIL PROTECTED]
> :filter=/usr/local/libexec/filters/ifhp
> :ifhp=model=hp4l
> pq_management
> :[EMAIL PROTECTED]
> :sd=/var/spool/lpd/%P
> :filter=/usr/local/libexec/filters/ifhp
> :ifhp=model=hp4l
>
> But LPRNG complained that the queue "lp" was undefined. Presuming
> that it wanted a default queue, I added an entry for lp that was:
> lp
> :sd=/var/spool/lpd/%P
> :lp=pq_grunts@localhost
>
> This quieted any errors, but printouts to management (or any other printer)
> went to pq_grunts. I then read up on the force_localhost issue, and decided
> that I needed to recompile with:
>
> ./configure --disable-gdbm --prefix=/usr --sysconfdir=/etc --disable-force_localhost
>
> It compiled and installed successfully, but whenever I run lpq, it only
> prints a "y"
> with an umlaut. Which, if I remember from my C days, is the character-ized
> output if you try to use what's returned if you read past EOF. In any
> event,
> What am I doing that could cause this, and what's the easiest way to set up
> what
> I'm shooting for?
>
> Any pointers would be appreciated.
>
> jk
>
> -----------------------------------------------------------------------------
> YOU MUST BE A LIST MEMBER IN ORDER TO POST TO THE LPRNG MAILING LIST
> The address you post from MUST be your subscription address
>
> If you need help, send email to [EMAIL PROTECTED] (or lprng-requests
> or lprng-digest-requests) with the word 'help' in the body. For the impatient,
> to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED]
> with: | example:
> subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED]
> unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED]
>
> If you have major problems, send email to [EMAIL PROTECTED] with the word
> LPRNGLIST in the SUBJECT line.
> -----------------------------------------------------------------------------
--
/* Christoph Beyer | Office: Building 2b / 23 *\
* DESY | Phone: 040-8998-2317 *
* - IT - | Fax: 040-8998-4060 *
\* 22603 Hamburg | http://www.desy.de */
-----------------------------------------------------------------------------
YOU MUST BE A LIST MEMBER IN ORDER TO POST TO THE LPRNG MAILING LIST
The address you post from MUST be your subscription address
If you need help, send email to [EMAIL PROTECTED] (or lprng-requests
or lprng-digest-requests) with the word 'help' in the body. For the impatient,
to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED]
with: | example:
subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED]
unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED]
If you have major problems, send email to [EMAIL PROTECTED] with the word
LPRNGLIST in the SUBJECT line.
-----------------------------------------------------------------------------
