Hello,
how can I configure my lprng to print my file who arrive directly in
PCL format.
my config is :
queue1|The printer in room 403:\
:lp=/dev/usb/lp0: \
:force_localhost: \
:if=/usr/bin/foomatic-rip: \
:ppd=/usr/lib/printfilters/HP-DeskJet_5550-hpijs.ppd: \
:sd=/var/spool/lpd/lp: \
:mx#0:sh:
with lprng 3.8.27-1 on debian.
so when I print a file from windows I have some special symbol like [,
^, ], etc....
So I suppose that the filter work on the PCL file from windows.
How can I say to lprng no to make the filtre on this PCL file.
Thank you for advance.
Best regard
David MICHEL
-----------------------------------------------------------------------------
YOU MUST BE A LIST MEMBER IN ORDER TO POST TO THE LPRng MAILING LIST
The address you post from or your Reply-To address MUST be your
subscription address
If you need help, send email to [EMAIL PROTECTED] (or lprng-requests
or lprng-digest-requests) with the word 'help' in the body.
To subscribe to a list with name LIST, send mail to [EMAIL PROTECTED]
with: | example:
subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED]
unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED]
If you have major problems, call Patrick Powell or one of the friendly
staff at Astart Technologies for help. Astart also does support for LPRng.
Also, check the Web Page at: http://www.lprng.com for any announcements.
Astart Technologies (LPRng - Print Spooler http://www.lprng.com)
6741 Convoy Court
San Diego, CA 92111
858-874-6543 FAX 858-751-2435
-----------------------------------------------------------------------------
