An explanation of the result codes follows below: *PASS - a test result belonging to this group is considered to be a pass for compliance testing purposes
Pass - the test has been executed correctly and to completion without any kind of problem Warning - the functionality is acceptable, but you should be aware that later revisions of the relevant standards or specification may change the requirements in this area. FIP - additional information is provided which needs to be checked manually. Unsupported - an optional feature is not available or not supported in the implementation under test. Not in Use - some tests may not be required in certain test modes or when an interface can be implemented by a macro or function and there are two versions of the test only one is used. Untested - no test written to check a particular feature or an optional facility needed to perform a test is not available on the system. *FAIL - a test result belonging to this group is considered to be a fail for compliance testing purposes (unless the failure has been waived). Fail - the interface did not behave as expected. Uninitiated - the particular test in question did not start to execute. Unresolved - the test started but did not reach the point where the test was able to report success or failure. Unreported - a major error occurred during the testset execution. regards Andrew -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with subject of "unsubscribe". Trouble? Email [EMAIL PROTECTED]
