Hi, Robert: Aijun Wang China Telecom
> On Nov 23, 2021, at 18:04, Robert Raszuk <rob...@raszuk.net> wrote: > > > > > When the node is failed, or is detached from the network, it can’t send the > > BGP update to other peers already. > > LOL ... that's given. Same for IGP too. > > The UPDATE will be generated by the BGP peer of such node - typically RR. And > if you run BFD on that session it can be as fast as loosing IGP adj to an IGP > neighbour of the failing node. [WAJ] Then you depend again the BFD session which there is configuration overhead. For IGP solution, the BFD is not required. And, for tunnels situations, where you configure the monitor peer? Aijun Wang China Telecom > > Cheers, > R. > > > > >> On Tue, Nov 23, 2021 at 10:03 AM Aijun Wang <wangai...@tsinghua.org.cn> >> wrote: >> Hi, Robert: >> >> >> >> When the node is failed, or is detached from the network, it can’t send the >> BGP update to other peers already. >> >> And, as we have discussed, the potential usage of such information is not >> only BGP, but may be tunnel endpoints. >> >> Yes, I agree, the light speed is the same. >> >> >> >> >> >> Best Regards >> >> >> >> Aijun Wang >> >> China Telecom >> >> >> >> From: lsr-boun...@ietf.org <lsr-boun...@ietf.org> On Behalf Of Robert Raszuk >> Sent: Tuesday, November 23, 2021 4:40 PM >> To: Aijun Wang <wangai...@tsinghua.org.cn> >> Cc: Les Ginsberg (ginsberg) <ginsb...@cisco.com>; Gyan Mishra >> <hayabusa...@gmail.com>; Christian Hopps <cho...@chopps.org>; Tony Li >> <tony...@tony.li>; lsr <lsr@ietf.org>; Acee Lindem (acee) <a...@cisco.com>; >> Tony Przygienda <tonysi...@gmail.com> >> Subject: Re: [Lsr] 【Responses for Comments on PUAM Draft】RE: IETF 112 LSR >> Meeting Minutes >> >> >> >> Aijun, >> >> >> >> > or lose the fast convergences >> >> >> >> Putting aside all the drawbacks already discussed, what makes you think that >> flooding LSPs or LSAs across tens of hops over 2 or maybe soon 8 areas would >> be any faster then sending BGP UPDATE message(s) across 2-3 RRs ? >> >> >> >> Assume you need to detect the failure and react to it in your RP/RE >> regardless how it is signalled. If triggered by ABRs you not only need to >> detect the failure of a node, but also flood it locally within the local >> area. >> >> >> >> Light propagation speed last time I checked does not seems to be different >> for BGP vs OSPF/ISIS packets. >> >> >> >> Thx, >> >> R. >> >> >> > _______________________________________________ > Lsr mailing list > Lsr@ietf.org > https://www.ietf.org/mailman/listinfo/lsr
_______________________________________________ Lsr mailing list Lsr@ietf.org https://www.ietf.org/mailman/listinfo/lsr
