Hi Tony, On #2 I you are right in the case of src L1 getting partitioned. Yes it will kill anycast design. If this is showstopper ... not sure. AFAIK only sourcing ABRs need to keep track about all links to PE to be down. That requirement does not propagate any further upstream.
Thx On Wed, Dec 1, 2021 at 4:58 PM Tony Przygienda <tonysi...@gmail.com> wrote: > 1. my question is different. why does the draft say that seqnr# & IDs have > to be preserved between restarts > > 2. I'm still concerned about L1/L2 hierarchy. If an L2 border sees same > prefix negative pulses from two different L1/L2s it still has to keep > state to only pulse into L1 after _all_ the guys pulsed negative (which is > basically impossible since the _negative_ cannot persist it seems). Now how > will it even know that? it has to keep track who advertised the same > summary & who pulsed or otherwise it will pulse on anyone with a summary > giving a pulse and with that anycast won't work AFAIS and worse you get > into weird situations where you have 2 L1/L2 into same L1 area, one lost > link to reach the PE (arguably L1 got partitioned) and pulses & then the > L1/L2 on the border of the down L1 pulses and tears the session down albeit > the prefix is perfectly reachable through the other L1/L2. I assume that > parses for the connoscenti ... > > -=--- tony > > On Wed, Dec 1, 2021 at 4:00 PM Peter Psenak <ppse...@cisco.com> wrote: > >> Tony, >> >> On 01/12/2021 15:31, Tony Przygienda wrote: >> >> > >> > Or maybe I missed something in the draft or between the lines in the >> > whole thing ... Do we assume the negative just quickly tears down the >> > BGP session & then it loses any relevance and we rely on BGP to retry >> > after reset automatically or something? >> >> yes. >> >> >> But then why do we even care about retaining the LSP IDs & SeqNr# would >> I ask? >> >> it's used for the purpose of flooding, so that during the flooding you >> do not flood the same pulse LSP multiple times. >> >> thanks, >> Peter >> >> >> > >> > -- tony >> > >> > >> > >> > >> > >> > On Tue, Nov 30, 2021 at 11:19 PM Les Ginsberg (ginsberg) >> > <ginsberg=40cisco....@dmarc.ietf.org >> > <mailto:40cisco....@dmarc.ietf.org>> wrote: >> > >> > Hannes - >> > >> > Please see >> > >> https://datatracker.ietf.org/doc/html/draft-ppsenak-lsr-igp-event-notification-00#section-4.1 >> > >> > The new Pulse LSPs don't have remaining lifetime - quite >> intentionally. >> > They are only retained long enough to support flooding. >> > >> > But, you remind me that we need to specify how the checksum is >> > calculated. Will do that in the next revision. >> > >> > Thanx. >> > >> > Les >> > >> > > -----Original Message----- >> > > From: Hannes Gredler <han...@gredler.at <mailto: >> han...@gredler.at>> >> > > Sent: Tuesday, November 30, 2021 11:22 AM >> > > To: Peter Psenak (ppsenak) <ppse...@cisco.com >> > <mailto:ppse...@cisco.com>> >> > > Cc: Robert Raszuk <rob...@raszuk.net <mailto:rob...@raszuk.net >> >>; >> > Les Ginsberg (ginsberg) >> > > <ginsb...@cisco.com <mailto:ginsb...@cisco.com>>; Aijun Wang >> > <wangai...@tsinghua.org.cn <mailto:wangai...@tsinghua.org.cn>>; lsr >> > > <lsr@ietf.org <mailto:lsr@ietf.org>>; Tony Li <tony...@tony.li >> > <mailto:tony...@tony.li>>; Shraddha Hegde >> > > <shrad...@juniper.net <mailto:shrad...@juniper.net>> >> > > Subject: Re: [Lsr] BGP vs PUA/PULSE >> > > >> > > hi peter, >> > > >> > > Just curious: Do you have an idea how to make short-lived LSPs >> > compatible >> > > with the problem stated in >> > > https://datatracker.ietf.org/doc/html/rfc7987 >> > > >> > > Would like to hear your thoughts on that. >> > > >> > > thanks, >> > > >> > > /hannes >> > > >> > > On Tue, Nov 30, 2021 at 01:15:04PM +0100, Peter Psenak wrote: >> > > | Hi Robert, >> > > | >> > > | On 30/11/2021 12:40, Robert Raszuk wrote: >> > > | > Hey Peter, >> > > | > >> > > | > > #1 - I am not ok with the ephemeral nature of the >> > advertisements. (I >> > > | > > proposed an alternative). >> > > | > >> > > | > LSPs have their age today. One can generate LSP with the >> > lifetime of 1 >> > > | > min. Protocol already allows that. >> > > | > >> > > | > >> > > | > That's a pretty clever comparison indeed. I had a feeling it >> > will come >> > > | > up here and here you go :) >> > > | > >> > > | > But I am afraid this is not comparing apple to apples. >> > > | > >> > > | > In LSPs or LSA flooding you have a bunch of mechanisms to >> > make sure the >> > > | > information stays fresh >> > > | > and does not time out. And the default refresh in ISIS if I >> > recall was >> > > | > something like 15 minutes ? >> > > | >> > > | yes, default refresh is 900 for the default lifetime of 1200 >> > sec. Most >> > > | people change both to much larger values. >> > > | >> > > | If I send the LSP with the lifetime of 1 min, there will never >> > be any >> > > | refresh of it. It will last 1 min and then will be purged and >> > removed from >> > > | the database. The only difference with the Pulse LSP is that it >> > is not >> > > | purged to avoid additional flooding. >> > > | >> > > | >> > > | > >> > > | > Today in all MPLS networks host routes from all areas are >> > "spread" >> > > | > everywhere including all P and PE routers, that's how LS >> > protocols >> > > | > distribute data, we have no other way to do that in LS >> IGPs. >> > > | > >> > > | > >> > > | > Can't you run OSPF over GRE ? For ISIS Henk had proposal not >> > so long ago >> > > | > to run it over TCP too. >> > > | > >> > >> https://datatracker.ietf.org/doc/html/draft-hsmit-lsr-isis-flooding-over- >> > > tcp-00 >> > > | >> > > | you can run anything over GRE, including IGPs, and you don't >> > need TCP >> > > | transport for that. I don't see the relevance here. Are you >> > suggesting to >> > > | create GRE tunnels to all PEs that need the pulses? Nah, that >> > would be an >> > > | ugly requirement. >> > > | >> > > | thanks, >> > > | Peter >> > > | >> > > | >> > > | > >> > > | > Seems like a perfect fit ! >> > > | > >> > > | > Thx, >> > > | > R. >> > > | >> > >> > _______________________________________________ >> > Lsr mailing list >> > Lsr@ietf.org <mailto:Lsr@ietf.org> >> > https://www.ietf.org/mailman/listinfo/lsr >> > >> >>
_______________________________________________ Lsr mailing list Lsr@ietf.org https://www.ietf.org/mailman/listinfo/lsr
