Pavan – Thanx for the reply. The choice of how many documents is – at least at this point – up to you. But good to know you intend to address this topic.
The statement: “these procedures are not a prerequisite for progressing the two documents currently under discussion” is your opinion. My opinion is that I am not comfortable progressing the documents – particularly the LSR document – when there are significant questions about how the IGP extensions can be used. This is consistent with my initial reply on this thread – which was that I preferred the document remain an individual draft at this point. Other folks should speak for themselves (of course). Les From: Vishnu Pavan Beeram <[email protected]> Sent: Wednesday, August 26, 2026 6:42 PM To: Les Ginsberg (ginsberg) <[email protected]> Cc: Barth, Colby <[email protected]>; Robert Raszuk <[email protected]>; Barth, Colby <[email protected]>; Tony Li <[email protected]>; Marisol <[email protected]>; Gunter van de Velde (Nokia) <[email protected]>; Acee Lindem <[email protected]>; TEAS WG Chairs <[email protected]>; Christian Hopps <[email protected]>; “[email protected]” <[email protected]>; lsr-chairs <[email protected]>; lsr <[email protected]>; Getting Ready for Energy-Efficient Networking Discussion List <[email protected]> Subject: Re: [Green] Re: [Lsr] Re: Re: Adoption of draft-many-lsr-power-group Les, The question about coordinating sleep-wake transitions is valid — as Colby noted earlier, we plan to cover it in a separate companion document that defines automated coordination procedures. That said, these procedures are not a prerequisite for progressing the two documents currently under discussion, which serve distinct purposes: * The LSR draft advertises power group membership, PSP values, and sleeping adjacencies — it is an information distribution mechanism. * The TEAS draft uses that information for power-aware path placement — it concentrates traffic to make links candidates for sleeping. Neither document prescribes how an interface transitions to sleep. The sleep-wake coordination procedure is intentionally decoupled — an implementation may choose to use controller-driven coordination (ideally backed by a standard data model such as GREEN YANG), a standardized protocol handshake (we plan to publish a document that provides one option for this, though it need not be the only one), or its own coordination procedure using device APIs on both ends of the link. The TLVs defined in the LSR document are usable with any of these approaches. We can add an explicit statement in both drafts clarifying that the procedures for coordinating sleep-wake transitions are outside their scope. Regards, -Pavan On Wed, Aug 26, 2026 at 7:51 AM Les Ginsberg (ginsberg) <[email protected]<mailto:[email protected]>> wrote: Colby – Given that these procedures seem to be relevant to interoperability, I find it odd that you think discussing them is outside the scope of the current documents. Defining new TLVs without defining the procedures which make them usable seems less than desirable. Les From: Barth, Colby <[email protected]<mailto:[email protected]>> Sent: Wednesday, August 26, 2026 5:49 AM To: Les Ginsberg (ginsberg) <[email protected]<mailto:[email protected]>>; Robert Raszuk <[email protected]<mailto:[email protected]>>; Barth, Colby <[email protected]<mailto:[email protected]>> Cc: Tony Li <[email protected]<mailto:[email protected]>>; Marisol <[email protected]<mailto:[email protected]>>; Vishnu Pavan Beeram <[email protected]<mailto:[email protected]>>; Gunter van de Velde (Nokia) <[email protected]<mailto:[email protected]>>; Acee Lindem <[email protected]<mailto:[email protected]>>; TEAS WG Chairs <[email protected]<mailto:[email protected]>>; Christian Hopps <[email protected]<mailto:[email protected]>>; “[email protected]<mailto:[email protected]>” <[email protected]<mailto:[email protected]>>; lsr-chairs <[email protected]<mailto:[email protected]>>; lsr <[email protected]<mailto:[email protected]>>; Getting Ready for Energy-Efficient Networking Discussion List <[email protected]<mailto:[email protected]>> Subject: Re: [Green] Re: [Lsr] Re: Re: Adoption of draft-many-lsr-power-group Hi Les, Yes, we definitely care about coordinating sleep-wake transitions between directly connected interfaces. The procedures for dynamically ensuring that both ends of the link have been put to sleep are outside the scope of this document and should be discussed separately. They are outside the scope of the TEAS document as well. -- Colby From: Les Ginsberg (ginsberg) <[email protected]<mailto:[email protected]>> Date: Wednesday, August 26, 2026 at 1:58 AM To: Robert Raszuk <[email protected]<mailto:[email protected]>>; Barth, Colby <[email protected]<mailto:[email protected]>> Cc: Tony Li <[email protected]<mailto:[email protected]>>; Marisol <[email protected]<mailto:[email protected]>>; Vishnu Pavan Beeram <[email protected]<mailto:[email protected]>>; Gunter van de Velde (Nokia) <[email protected]<mailto:[email protected]>>; Acee Lindem <[email protected]<mailto:[email protected]>>; TEAS WG Chairs <[email protected]<mailto:[email protected]>>; Christian Hopps <[email protected]<mailto:[email protected]>>; “[email protected]<mailto:[email protected]>” <[email protected]<mailto:[email protected]>>; lsr-chairs <[email protected]<mailto:[email protected]>>; lsr <[email protected]<mailto:[email protected]>>; Getting Ready for Energy-Efficient Networking Discussion List <[email protected]<mailto:[email protected]>> Subject: [Green] Re: [Lsr] Re: Re: Adoption of draft-many-lsr-power-group Just continuing to walk down this road… If A and B have an adjacency, and A makes a local decision – after whatever traffic flow consolidation has taken place – to place the interface to B in power sleep mode – what assurance do we have that B will do the same?? If it doesn’t, you end up with A advertising a sleeping adjacency to B and B not advertising any adjacency (regular or sleeping) to A. Which means the two way connectivity check that Ron has mentioned as regards to sleeping adjacencies fails…which means we really have no way of knowing whether the link A-B actually exists (other than history). Or are you thinking that B – upon seeing that A is now advertising a sleeping adjacency to B – MUST do the same on the link to A? And presumably MUST do so before the non-sleeping adjacency to A goes down – else there will be no knowledge that the link A-B is potentially usable. Colby – do you care about this?? Do you think this needs to be discussed in the LSR draft? Or the TEAS draft? Les From: Robert Raszuk <[email protected]<mailto:[email protected]>> Sent: Tuesday, August 25, 2026 2:56 PM To: Barth, Colby <[email protected]<mailto:[email protected]>> Cc: [email protected]<mailto:[email protected]>; Tony Li <[email protected]<mailto:[email protected]>>; Marisol <[email protected]<mailto:[email protected]>>; Vishnu Pavan Beeram <[email protected]<mailto:[email protected]>>; Gunter van de Velde (Nokia) <[email protected]<mailto:[email protected]>>; Acee Lindem <[email protected]<mailto:[email protected]>>; TEAS WG Chairs <[email protected]<mailto:[email protected]>>; Christian Hopps <[email protected]<mailto:[email protected]>>; “[email protected]<mailto:[email protected]>” <[email protected]<mailto:[email protected]>>; Les Ginsberg (ginsberg) <[email protected]<mailto:[email protected]>>; lsr-chairs <[email protected]<mailto:[email protected]>>; lsr <[email protected]<mailto:[email protected]>>; Getting Ready for Energy-Efficient Networking Discussion List <[email protected]<mailto:[email protected]>> Subject: Re: [Green] Re: [Lsr] Re: Re: Adoption of draft-many-lsr-power-group Hi Colby, Sorry if I missed it but after traffic consolidation what exactly triggers a power group with all its members to be transitioned to ASLEEP state ? Is this local heuristic ? For example traffic is less then X Gb/s for the time T > of Y sec ? And likewise what makes a power group with all its members (interfaces) to wake up ? Is this mgmt driven ? Thx, R. On Tue, Aug 25, 2026 at 11:33 PM Barth, Colby <[email protected]<mailto:[email protected]>> wrote: Hi Benoit, all - I’m wondering if it may be helpful to take a step back and consider the big picture here (though I’m not sure the big picture needs to be described in an IETF document). For ‘unused or lightly used’ routing components to be transitioned to some power-sleep state, we need to consolidate traffic flows … without creating congestion. This is Traffic Engineering. And it’s what the 2 drafts we are discussing address, nothing more, nothing less. https://datatracker.ietf.org/doc/draft-many-lsr-power-group/<https://urldefense.com/v3/__https:/datatracker.ietf.org/doc/draft-many-lsr-power-group/__;!!NpxR!gj2s31bLTl_s8ynWgf4RKj-GpsucY1VLHvzp5Q8zeOfXvT9ASHw7v00ECO_Ov8bsdhtS9h_3aW8MlalHHdvnaw0FZINme4A$> and https://datatracker.ietf.org/doc/draft-many-teas-power-steering/<https://urldefense.com/v3/__https:/datatracker.ietf.org/doc/draft-many-teas-power-steering/__;!!NpxR!gj2s31bLTl_s8ynWgf4RKj-GpsucY1VLHvzp5Q8zeOfXvT9ASHw7v00ECO_Ov8bsdhtS9h_3aW8MlalHHdvnaw0F1cbQcpI$> The former being the topic of this WG adoption poll. The power-groups are leveraged by any path computing entity, i.e. an ingress router or centralized PCE, and the facilitate power aware path placement. This is the topic of the latter draft. This traffic engineering step of flow consolidation would be required if one were to employ the GREEN YANG model for conveying and/or controlling various power related information/states to a centralized controller anyway. As far as I can tell, this has never been discussed nor is it in the scope of GREEN. The information carried in the power-group need not be identical to that which is conveyed via the YANG model. They serve different purposes. Once traffic has been consolidated, then some components could be transitioned to power-sleep state. Maybe that is facilitated by the GREEN YANG model or maybe that is left to individual nodes to decide. i.e. without centralized coordination. -- Colby From: [email protected]<mailto:[email protected]> <[email protected]<mailto:[email protected]>> Date: Monday, August 24, 2026 at 4:55 PM To: Tony Li <[email protected]<mailto:[email protected]>> Cc: Marisol <[email protected]<mailto:[email protected]>>; Vishnu Pavan Beeram <[email protected]<mailto:[email protected]>>; Gunter van de Velde (Nokia) <[email protected]<mailto:[email protected]>>; Acee Lindem <[email protected]<mailto:[email protected]>>; TEAS WG Chairs <[email protected]<mailto:[email protected]>>; Christian Hopps <[email protected]<mailto:[email protected]>>; “[email protected]<mailto:[email protected]>” <[email protected]<mailto:[email protected]>>; Les Ginsberg <[email protected]<mailto:[email protected]>>; lsr-chairs <[email protected]<mailto:[email protected]>>; lsr <[email protected]<mailto:[email protected]>>; Getting Ready for Energy-Efficient Networking Discussion List <[email protected]<mailto:[email protected]>> Subject: [Lsr] Re: [Green] Re: Adoption of draft-many-lsr-power-group Hi Tony, Thanks for engaging. See inline. On 24/08/2026 22:00, Tony Li wrote: Hi Benoit, How does the Power Group Identifier ("which has node-local significance") refers to a specific Power State in https://datatracker.ietf.org/doc/draft-ietf-green-power-and-energy-yang/<https://urldefense.com/v3/__https:/datatracker.ietf.org/doc/draft-ietf-green-power-and-energy-yang/__;!!NpxR!iFBNz28r2nufsGH34niZQ17aAsLTQDCHAh-GG8bmDm_1wEoidmMlHsXfVB9kKBShNWJyeBp3Jlwxc4_WNIzMSlCI$>, basically on/off/sleep (see YANG identities power-state-on, power-state-off, and power-state-sleep)? The power state is is not reflected in the Power Group Identifier (PGI). The PGI is just associated with a power group, which is an abstraction of some pieces of hardware in the hierarchy. The physical interfaces are the leaves in this hierarchy and the power state for the interfaces is reflected in the IS-IS adjacencies. Interfaces that have an adjacency are (obviously) in power-state-on. Interfaces with a sleeping adjacency are in power-state-sleep. There is no tracking of interfaces in power-state-off, nor of interfaces that are power-state-on but have not formed an adjacency. There is no tracking of power state of higher levels of hardware. Presumably when all relevant interfaces are sleeping, the platform can put higher level hardware to sleep. Once again, we are not trying to perform management plane functions, only control plane traffic engineering. You know, this is exactly my point. And I have seen this pattern in the past. "It's just routing, not mgmt, so we don't care" Think of BGP flowspec and IPFIX. Looking at the fields at https://www.rfc-editor.org/info/rfc5575/#section-4<https://urldefense.com/v3/__https:/www.rfc-editor.org/info/rfc5575/*section-4__;Iw!!NpxR!iFBNz28r2nufsGH34niZQ17aAsLTQDCHAh-GG8bmDm_1wEoidmMlHsXfVB9kKBShNWJyeBp3Jlwxc4_WNN693ZBN$>, this is such a missed opportunity not to have reused the IPFIX IEs. Operators don't manage the control plane or the management plane (or the data plance) independently.. They look at all planes (mgmt, control, data) for troubleshooting, anomaly detection, and assurance. See the NMOP "sharing your incidents" sessions. And yes, we could map, as an example, a BGP Flowspect Type 1 - Destination Prefix<https://urldefense.com/v3/__https:/www.rfc-editor.org/info/rfc8955/*name-type-1-destination-prefix__;Iw!!NpxR!iFBNz28r2nufsGH34niZQ17aAsLTQDCHAh-GG8bmDm_1wEoidmMlHsXfVB9kKBShNWJyeBp3Jlwxc4_WNHzTFd7N$> to destinationIPv4Prefix ... oh wait, maybe this is destinationIPv6Prefix? Explained differntly, here is the issue we face in operations: "Network Automation: the costly Data Models Integration and Mediation<https://urldefense.com/v3/__https:/www.claise.be/network-automation-and-the-costly-data-model-integration-mediation/__;!!NpxR!iFBNz28r2nufsGH34niZQ17aAsLTQDCHAh-GG8bmDm_1wEoidmMlHsXfVB9kKBShNWJyeBp3Jlwxc4_WNBsySZB6$>" I really would like to understand (see described somewhere) how an operator would use the LSR power groups, optimize routing, and use the YANG module power state at the same time. To me, this would be a prerequisite before adopting. Btw, a specific operator told me: config management is so complex, with many frozen windows, that I will not allow energy-related configuration independently. Regards, Benoit Cheers, Tony _______________________________________________ Green mailing list -- [email protected]<mailto:[email protected]> To unsubscribe send an email to [email protected]<mailto:[email protected]>
_______________________________________________ Lsr mailing list -- [email protected] To unsubscribe send an email to [email protected]
