All set. Looks like I had a setting not allowing external emails to be relayed, only internal addresses. Just talking these things out helps me a lot. Appreciate all of the responses!
On Dec 9, 2016 6:55 AM, "Clément OUDOT" <[email protected]> wrote: > 2016-12-09 12:38 GMT+01:00 Lee Phillips <[email protected]>: > > Should sendmail be installed? I have $mail_sendmailpath instead pointing > to > > where I unzipped the phpmailer files from the GitHub site. All the other > > parameters are filled out to go through the same place scan to email > uses on > > our printers. > > No, you don't need sendmail if you use external SMTP > > > > > I changed debug level to 2 in the mail section and can see it > authentication > > with the SMTP server. It even says message was queued for delivery. > > > > So seems your SMTP configuration is good. > > > I've gone through both configuration pages several times. I must not be > > understanding it correctly. I'm trying to use an outside SMTP server to > > relay the email. Is phpmailer trying to send it from the SSP server it is > > installed on or is it supposed to send using the configuration in the > mail > > section of the SSP config file? Like when using telnet to test SMTP, > this is > > how I'm using it. > > > SSP uses PHPMailer library, so if you configured an external SMTP, the > mail is sent directly to this SMTP. > _______________________________________________ > ltb-users mailing list > [email protected] > http://lists.ltb-project.org/listinfo/ltb-users >
_______________________________________________ ltb-users mailing list [email protected] http://lists.ltb-project.org/listinfo/ltb-users
