Hi Sato,
This is an issue with Freescale not pushing out their content to the
public GPP.
You will need to contact them about this BSP and ask them where you can
get the content. Probably the most likely way is to download the ISO
image (which I guess you have) and look for it on there under the pkgs
directory on the image.
Regards, Stuart
On 21/05/11 21:30, Sato Haku-B36453 wrote:
HI,
I was setting up fsl-mm-codeclib and Gstreamer. At the end of ltib
compile sequence, I encountered a problem.
I sent
~$./ltib --c
And set up packages and selected the appropriate selections according
to the Multi Media Framework reference manual.
At the end of compile, I go the following message.
++begin excerpt
Processing: fsl-mm-codeclib
=====================
Processing: fls-mm-ms-codeclib
=====================
Build path taken because: no built rpm,
Testing network connectivity
OK PPP:
Try fsl-mm-ms-codeclib-1.9.6.tar.gz.md5 from the PPP
http://auslxsc01.mtwk.freescale.net/ppp/fsl-mm-ms-codeclib-1.9.6.tar.gz.md5:
ERROR 404: Not Found.
Try fsl-mm-ms-codeclib-1.9.6.tar.gz from the PPP
ERROR404: notfound
Can't get: fsl-mm-ms-codeclib-1.9.6.tar.gz at ./ltib line 790
f_buildrpms() returned an error, exiting
traceback:
main:560
++end of error excerpt
It seems that LTIB could not find the file at /PPP site. So I went
there and found a version 2.0.0
Here are my questions...
1. Could I use 2.0.0 in place of 1.9.6?
2.If so, how would I get ltib to recognize it?
3.Is there alternalte way to get this installed?
I am trying to get this resolved but had not had any success, your
help is appreciated.
Thanks
_______________________________________________
LTIB home page: http://ltib.org
Ltib mailing list
[email protected]
https://lists.nongnu.org/mailman/listinfo/ltib
_______________________________________________
LTIB home page: http://ltib.org
Ltib mailing list
[email protected]
https://lists.nongnu.org/mailman/listinfo/ltib
