Hi Andy,
Unless you keep questions on the list, I won't answer (and no one else can).
You need to look at configure, not the other automake scripts. You
should not need to run automake, you should use configure as-is.
grep -l BUILDCC /home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/*/*.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/asterisk/asterisk-cf.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/asterisk/asterisk.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/bash/bash.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/binutils/binutils.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/busybox/busybox-1.1.3.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/busybox/busybox.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/cpio/cpio.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/cpufrequtils/cpufrequtils.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/e2fsprogs/e2fsprogs.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/fontconfig/fontconfig.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/gdb/gdb-4.2.187.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/gdb/gdb-4.3-74.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/gdb/gdb-6.6.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/gdb/gdb.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/glibc/glibc-2.3.2.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/glibc/glibc.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/gmp/gmp.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/iproute/iproute.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/libedit/libedit.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/libgpg-error/libgpg-error.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/libXt/libXt.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/linux-atm/linux-atm.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/linux-wlan/linux-wlan.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/man/man.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/microwindows/microwindows-nommu.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/microwindows/microwindows.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/modutils/modutils.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/mpfr/mpfr.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/mplayer/mplayer.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/ncurses/ncurses.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/openswan/openswan-2.4.12.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/openswan/openswan.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/pcre/pcre.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/schedutils/schedutils.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/tc-wrapper/tc-wrapper.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/texinfo/texinfo.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/timezone/timezone.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/u-boot-tools/u-boot-tools.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/u-boot/u-boot-1.1.3-mpc8349eamds.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/u-boot/u-boot-1.1.3-mpc8349emds.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/u-boot/u-boot-1.1.3-mpc8349itx.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/u-boot/u-boot-1.1.3-mpc8360epb-rev2.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/u-boot/u-boot-1.1.3-mpc8360epb.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/u-boot/u-boot-1.1.6-mpc8360epb.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/u-boot/u-boot-1.2.0-mcf5445x.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/u-boot/u-boot-1.2.0-mpc5121ads.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/u-boot/u-boot-1.2.0-mpc8360epb-rev2.1.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/u-boot/u-boot-1.2.0-mpc8360epb-rev2.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/u-boot/u-boot-1.2.0.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/u-boot/u-boot-1.3.0-mpc837xemds.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/u-boot/u-boot-1.3.0-mpc837xerdb.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/u-boot/u-boot-1.3.0-mpc8548cds.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/u-boot/u-boot-1.3.0-mpc8641hpcn.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/u-boot/u-boot-1.3.1-20080123.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/u-boot/u-boot-1.3.2-m547x_8x.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/u-boot/u-boot-1.3.2-mpc5121.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/u-boot/u-boot-1.3.2.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/u-boot/u-boot-1.3.3-mpc837xerdb.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/u-boot/u-boot-1.3-rc3-uClinux.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/u-boot/u-boot-2008.10-mpc5121.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/u-boot/u-boot-2009.03-rc1-mpc8536ds.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/u-boot/u-boot-2009.11-lpc31xx.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/u-boot/u-boot-8xx.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/u-boot/u-boot-fsl-mpc7448.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/u-boot/u-boot-fsl-pq3.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/u-boot/u-boot-mpc5200.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/u-boot/u-boot-mpclite5200b.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/u-boot/u-boot.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/uclibc/uclibc-0.9.27.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/uclibc/uclibc-nommu.spec
/home/stuart/Personal/Src/sv_pristine/dist/lfs-5.1/uclibc/uclibc.spec
Regards, Stuart
On 24/01/12 12:39, Andy Yew wrote:
Dear Stuart
After looking at the makefile.am <http://makefile.am>, there's no clue
about hostcc and buildcc. However, in makefile.in
<http://makefile.in>, there's build_triplets and host_triplets, but i
suppose it's generated from *.am via ./configure right?
If it's not cross-compiler aware, what could i modify to differentiate
the hostcc and buildcc? Could you please give me some hints?
Besides, in LTIB exisitng packages, do you know which one has these
hostcc and buildcc feature? I might be able to pick up some
information from its makefile or even specfile....
Thanks,
Andy
On Mon, Jan 23, 2012 at 10:04 PM, Stuart Hughes <[email protected]
<mailto:[email protected]>> wrote:
Hi Andy,
You need to look in the Makefile(s) and see if they have anything
to differentiate the build host from the target host. Often this
may be something like HOSTCC or BUILDCC. Sometimes though there's
nothing if the file is not tailored for cross compiling.
Regards, Stuart
On 22/01/12 18:05, Andy Yew wrote:
Hi all,
Has anyone successfully build/LTIB Gutenprint?
Here are the log file of "./ltib -m scbuild -p gutenprint.spec"
and the .spec file i've generated from template.
It seems like there's slight problem running binary file within
the building/making process. It's trying to run the binary and
generate the xmli18n-tmp.h file in /src/xml folder.
Any idea to suppress this kind of problem where make process
involves running binary programs to generate data??
Here's the snapshot of the last few lines showing making error:
######################################################################################################
make[5]: Entering directory
`/home/hongjet-vm1/ltib/rpm/BUILD/gutenprint-5.2.8/src/xml/escp2'
make[5]: Nothing to be done for `all-am'.
make[5]: Leaving directory
`/home/hongjet-vm1/ltib/rpm/BUILD/gutenprint-5.2.8/src/xml/escp2'
make[4]: Leaving directory
`/home/hongjet-vm1/ltib/rpm/BUILD/gutenprint-5.2.8/src/xml/escp2'
make[4]: Entering directory
`/home/hongjet-vm1/ltib/rpm/BUILD/gutenprint-5.2.8/src/xml'
gcc -DHAVE_CONFIG_H -I. -I../.. -I../../include -I../../include
-Wall -Wcast-align -Wstrict-prototypes -Wmissing-prototypes
-Wmissing-declarations -Wnested-externs -Wwrite-strings
-Werror-implicit-function-declaration -Winline -Wformat=2
-finline-limit=131072 -Disfinite=finite -O6 -MT
extract-strings.o -MD -MP -MF .deps/extract-strings.Tpo -c -o
extract-strings.o extract-strings.c
mv -f .deps/extract-strings.Tpo .deps/extract-strings.Po
/bin/bash ../../libtool --tag=CC --mode=link gcc
-Disfinite=finite -O6 -o extract-strings extract-strings.o
../../src/main/libgutenprint.la <http://libgutenprint.la>
libtool: link: gcc -Disfinite=finite -O6 -o .libs/extract-strings
extract-strings.o ../../src/main/.libs/libgutenprint.so -lm
rm -f xmli18n-tmp.h xmli18n-tmp.h.tmp
./extract-strings `cat xml-stamp | sed -e 's;^;./;'` >
xmli18n-tmp.h.tmp
make[4]: Leaving directory
`/home/hongjet-vm1/ltib/rpm/BUILD/gutenprint-5.2.8/src/xml'
make[3]: Leaving directory
`/home/hongjet-vm1/ltib/rpm/BUILD/gutenprint-5.2.8/src/xml'
make[2]: Leaving directory
`/home/hongjet-vm1/ltib/rpm/BUILD/gutenprint-5.2.8/src'
make[1]: Leaving directory
`/home/hongjet-vm1/ltib/rpm/BUILD/gutenprint-5.2.8'
RPM build errors:
Build time for gutenprint: 41 seconds
######################################################################################################
Regards
Andy
_______________________________________________
LTIB home page:http://ltib.org
Ltib mailing list
[email protected] <mailto:[email protected]>
https://lists.nongnu.org/mailman/listinfo/ltib
_______________________________________________
LTIB home page: http://ltib.org
Ltib mailing list
[email protected]
https://lists.nongnu.org/mailman/listinfo/ltib
