On Tue, Jan 24, 2012 at 5:00 PM, Fritz Mueller <[email protected]> wrote: > Hi folks, > > I've gotten back around to the point on my project again where I'm needing to > port and bring up the Avahi mDNS package on my MPC8308 target. Making good > progress getting all the packages cross-compiled running, in preparation for > merging and posting the patches to the list. > > I am seeing one problem with my built binaries, though -- while I can publish > into mDNS from the target without difficulty, mDNS browsing on the target > always comes up empty. I know Mike G. had previously commented on this list > that he had been working on a port of Avahi to this same CPU. I was > wondering, Mike, if you had any success with mDNS browse, and/or if you > remember anything special that needed to be done in that regard that I might > be missing?
Sorry, I only tested the publishing side, not the client browse (I assume you are referring to avahi-browse). I have had some issues with browsing on some other platforms and was only able to use avahi-browse-static (sp?), but does not appear that the static browse is in the version that that I submitted for ltib. Likely a later version, but later versions had a host of pre-requisites that needed some massaging to get to work in a proper cross-compile environment (I eventually had to build them anyway for heartbeat, which shared much of the pre-reqs). avahi was probably the first package I had ever ported to ltib, so I am sure the quality is not quite up to what it should . I can try out the browse, but need a day or so to get one of the ltib built systems up and running. > thanks much, > --FritzM. _______________________________________________ LTIB home page: http://ltib.org Ltib mailing list [email protected] https://lists.nongnu.org/mailman/listinfo/ltib
