I have create with LTIB kernel, bootloader and rootfs.Now how to flash SD? I have finding this script, but dont work. WHY? thanks Date: Thu, 8 Mar 2012 09:29:44 +0530 From: [email protected] To: [email protected] Subject: [Ltib] (no subject)
hi..i tried to setup nfsroot command on my target board(MCF5475) but i got this
problem
U-Boot 1.3.3 (Mar 2 2012 - 13:54:30)
CPU: Freescale MCF5485
CPU CLK 200 Mhz BUS CLK 100 MhzBoard: Freescale FireEngine 5475 EVBI2C:
readyDRAM: 64 MBFLASH: 8 MBIn: serialOut: serialErr: serial
Net: FEC0, FEC1Hit any key to stop autoboot: 0 ## Booting kernel from Legacy
Image at ff850000 ... Image Name: Linux Kernel Image Image Type: M68K
Linux Kernel Image (uncompressed)
Data Size: 2285568 Bytes = 2.2 MB Load Address: 00020000 Entry
Point: 00020000 Verifying Checksum ... OK Loading Kernel Image ... OKOK
Linux version 2.6.25 ([email protected]) (gcc version 4.2.3
(Sourcery G++ Lite 4.2-125)) #20 Wed Mar 7 16:28:05 IST 2012starting up linux
startmem 0x288000, endmem 0x4000000, size 61MB
console [ttyS0] enabledBuilt 1 zonelists in Zone order, mobility grouping on.
Total pages: 8156Kernel command line: root=/dev/nfs rw
nfsaddrs=192.168.0.1:/tftpboot/ltib
ip=192.168.0.254:192.168.0.1:192.168.0.1:255.255.255.0::eth
0:off mtdparts=physmap-flash.0:2560k(kernel)ro,5376k(root)PID hash table
entries: 256 (order: 8, 1024 bytes)Console: colour dummy device 80x25Dentry
cache hash table entries: 8192 (order: 2, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 1, 16384 bytes)Memory:
62544k/62544k available (1704k kernel code, 1208k data, 72k init)SLUB:
Genslabs=13, HWalign=16, Order=0-2, MinObjects=8, CPUs=1, Nodes=1
Mount-cache hash table entries: 1024net_namespace: 152 bytesNET: Registered
protocol family 16MCF5485x INIT_DEVICESNET: Registered protocol family 2IP
route cache hash table entries: 2048 (order: 0, 8192 bytes)
TCP established hash table entries: 2048 (order: 1, 16384 bytes)TCP bind hash
table entries: 2048 (order: 0, 8192 bytes)TCP: Hash tables configured
(established 2048 bind 2048)TCP reno registered
m547x_8x DMA: Initialize Multi-channel DMA API v1.0JFFS2 version 2.2. (NAND) �©
2001-2006 Red Hat, Inc.io scheduler noop registeredio scheduler anticipatory
registeredio scheduler deadline registered
io scheduler cfq registered (default)IPCPLD1 Driver Registered with MAJOR no =
249IPCPLD2 Driver Registered with MAJOR no = 250IPGPIO Driver Registered with
MAJOR no = 246RTS driver registered with MAJOR no = 248
LINK STAT Driver Registered with MAJOR no = 245ColdFire internal UART serial
driver version 1.00ttyS0 at 0xf0008600 (irq = 99) is a builtin ColdFire
UARTttyS1 at 0xf0008700 (irq = 98) is a builtin ColdFire UART
ttyS2 at 0xf0008800 (irq = 97) is a builtin ColdFire UARTttyS3 at 0xf0008900
(irq = 96) is a builtin ColdFire UARTbrd: module loadedloop: module loadedFEC
ENET (DMA) Version 0.20
eth0: ethernet 00:60:72:00:00:01eth1: ethernet 00:60:72:00:00:02physmap
platform flash device: 007fffff at ff800000physmap-flash.0: Found 1 x16 devices
at 0x0 in 16-bit bank
NOR chip too large to fit in mapping. Attempting to cope... Amd/Fujitsu
Extended Query Table at 0x0040physmap-flash.0: CFI does not contain boot bank
location. Assuming top.number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code
brokenness.Reducing visibility of 8192KiB chip to 8191KiB2 cmdlinepart
partitions found on MTD device physmap-flash.0Creating 2 MTD partitions on
"physmap-flash.0":
0x00000000-0x00280000 : "kernel"0x00280000-0x007c0000 : "root"mice: PS/2 mouse
device common for all miceTCP cubic registeredNET: Registered protocol family 1
NET: Registered protocol family 17NET: Registered protocol family 15RPC:
Registered udp transport module.RPC: Registered tcp transport module.IP-Config:
Complete:
device=eth0, addr=192.168.0.254, mask=255.255.255.0, gw=192.168.0.1,
host=192.168.0.254, domain=, nis-domain=(none), bootserver=192.168.0.1,
rootserver=192.168.0.1, rootpath=Looking up port of RPC 100003/2 on 192.168.0.1
*** LINE 1111 *** FORMAT=4Current process id is 0BAD KERNEL TRAP: 00000000PC:
[<00156058>] dev_hard_start_xmit+0x0/0x260<0>SR: 2000 SP: 0024de50 a2:
00228410
d0: 00000000 d1: 00000000 d2: 00000000 d3: ffff8c8dd4: 00156058 d5:
0002b89a a0: 00156058 a1: 03052d8cProcess swapper (pid: 0,
stackpage=0022a410)Stack from 0024de50:
<0> 00000000<0> 00000000<0> ffff8c8d<0> 00156058<0> 0002b89a<0>
00156058<0> 03052d8c<0> 00228410 <0> 00000000<0> ffffffff<0> 00000000<0>
0024df8c<0> 00000002<0> 402c2000<0> 00156058<0> 001636ce
<0> 03110f00<0> 03061800<0> 00000000<0> c0a80001(0xc0a80001)<0>
00000004<0> 00273338<0> 00273538<0> 00273738 <0> 03061800<0> 03110f00<0>
03096fc0<0> 03061800<0> 00158d56<0> 03061800<0> 03022200<0> c0a800fe(0xc0a800fe)
<0> 03096fc4<0> 0018dbd6<0> 03110f00<0> 00000806<0>
c0a80001(0xc0a80001)<0> 03061800<0> c0a800fe(0xc0a800fe)<0> 00000000 <0>
0306192a<0> 00000000<0> ffff8cf1<0> 00000000<0> 0024df6c<0> 03022248<0>
03110e60<0> 03022200
Call Trace: <0> [<0003307c>]<0> [<0015e41a>]<0> [<0015e2e0>]<0>
[<00033306>] <0> [<0002fd12>]<0> [<00022504>]<0> [<001c55a0>]<0>
[<0002fd68>]
<0> [<0002b89a>]<0> [<00023adc>]<0> [<0002b89a>]<0> [<0002160c>]
<0> [<0002161c>]<0> [<000214fa>]<0> [<0002b89a>]
Kernel panic - not syncing: Aiee, killing interrupt handler!
can any one give solution for this problem...................................
_______________________________________________
LTIB home page: http://ltib.org
Ltib mailing list
[email protected]
https://lists.nongnu.org/mailman/listinfo/ltib
enaud_script.sh
Description: Bourne shell script
_______________________________________________ LTIB home page: http://ltib.org Ltib mailing list [email protected] https://lists.nongnu.org/mailman/listinfo/ltib
