Hi Nass, I had a quick look at your output and it seems that the u-boot sources do not have the config "mx6q_sabrelite_mfg_config"
You need to dig around in the sources (makefiles etc) and see if you can figure out if there is a suitable config to pass in and then configure that in LTIB as the config to build. Regard, Stuart On 19/02/13 18:12, Athanasios Silis wrote: > Hello everyone, > I recently acquired a Sabre-lite board, that's build around the > Freescale iMX6q ARM Cortex A9 processor. > From the fresscale website I downloaded a tar.gz with sources for > packages, linux kernel, presumable u-boot (2009.08) a toolchain (linaro > with gcc v.4.6.2). > > I am trying to deploy ltib on the host machine > so I run ltib -m config and tweak some values: > > for gcc options i set: > -O2 -march=armv7-a -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a9 > > and for u-boot board I chose "imx6q-sabrelite", as this is the one I have. > > The build fails with the following error > > http://pastebin.com/w52m9Nxr > > How can I create a target for sabrelite? > > Thank you for your help. > > Nass > > > _______________________________________________ > LTIB home page: http://ltib.org > > Ltib mailing list > [email protected] > https://lists.nongnu.org/mailman/listinfo/ltib > _______________________________________________ LTIB home page: http://ltib.org Ltib mailing list [email protected] https://lists.nongnu.org/mailman/listinfo/ltib
