Hi Peter, I don't know if it helps, but getting Qt3/4 to build under LTIB was a horrible, so by way of encouragement just keep chipping away.
Regards, Stuart On 27/09/13 19:41, Peter Barada wrote: > Anyone have luck building Qt5 under LTIB? I've been trying and am not > having success. > > Using the release > http://download.qt-project.org/official_releases/qt/5.1/5.1.1/single/qt-everywhere-opensource-src-5.1.1.tar.gz > > > I tried to target a beagleboard (as a step to getting it to run on my > OMAP dm37x board) using the following %Build stanza in a new > qtopia-5.1.1.spec file: > > %Build > > export PATH="/usr/bin/:$PATH" > > export AR='' > export CC='' > export CXX='' > export LD='' > > export QMAKESPEC="" > export PKG_CONFIG="pkg-config --define-variable=prefix=$TOP/rootfs/usr/ " > export PKG_CONFIG_PATH=$TOP/rootfs/usr/lib/pkgconfig > export PKG_CONFIG_SYSROOT=$TOP/rootfs/ > > ./configure -opensource -confirm-license -device linux-beagleboard-g++ > -device-option CROSS_COMPILE=$TOOLCHAIN_PATH/bin/arm-none-linux-gnueabi- > -no-eglfs -no-kms -no-icu -no-xcb -no-c++11 > > make -j1 > > I modified the source via the attached patch (to fix > https://bugreports.qt-project.org/browse/QTBUG-33300), and now it fails > with: > > Project ERROR: Unknown module(s) in QT: quick > make[3]: *** [sub-declarative-radio-make_first] Error 3 > make[3]: Leaving directory > `/home/peter/work/logic/eps_svn/software/products/linux/LTIB/trunk/ltib-3.0-qt5/rpm/BUILD/qt-everywhere-opensource-src-5.1.1/qtmultimedia/examples/multimedia' > make[2]: *** [sub-multimedia-make_first] Error 2 > make[2]: Leaving directory > `/home/peter/work/logic/eps_svn/software/products/linux/LTIB/trunk/ltib-3.0-qt5/rpm/BUILD/qt-everywhere-opensource-src-5.1.1/qtmultimedia/examples' > make[1]: *** [sub-examples-make_first] Error 2 > make[1]: Leaving directory > `/home/peter/work/logic/eps_svn/software/products/linux/LTIB/trunk/ltib-3.0-qt5/rpm/BUILD/qt-everywhere-opensource-src-5.1.1/qtmultimedia' > make: *** [module-qtmultimedia-make_first] Error 2 > error: Bad exit status from > /home/peter/work/logic/eps_svn/software/products/linux/LTIB/trunk/ltib-3.0-qt5/tmp/rpm-tmp.17783 > (%build) > > I can't build with the "quick" module since I don't have OpenGL in my > world (wonder why Qt5 didn't figure this out from the "-no-opengl" > confugure option) but trying to add "-skip quick" causes Qt5 configure > to fail with "no such module qtquick". > > Any help on getting Qt5 to build under LTIB is appreciated. Thanks in > advance! > > > > _______________________________________________ > LTIB home page: http://ltib.org > > Ltib mailing list > [email protected] > https://lists.nongnu.org/mailman/listinfo/ltib > _______________________________________________ LTIB home page: http://ltib.org Ltib mailing list [email protected] https://lists.nongnu.org/mailman/listinfo/ltib
