* Subrata Modak ([email protected]) wrote:
> Hi Mathieu,
> 
> On Tue, Mar 17, 2009 at 7:02 AM, Mathieu Desnoyers <
> [email protected]> wrote:
> 
> > Hi,
> >
> > I am trying to get access to some non-x86 hardware to run some atomic
> > primitive benchmarks for a paper on LTTng I am preparing. That should be
> > useful to argue about performance benefit of per-cpu atomic operations
> > vs interrupt disabling. I would like to run the following benchmark
> > module on CONFIG_SMP :
> >
> > - PowerPC
> > - MIPS
> > - ia64
> > - alpha
> >
> > usage :
> > make
> > insmod test-cmpxchg-nolock.ko
> > insmod: error inserting 'test-cmpxchg-nolock.ko': -1 Resource temporarily
> > unavailable
> > dmesg (see dmesg output)
> >
> 
> With your permission, can we include this test in LTP (
> http://ltp.sourceforge.net/), in some appropriate place as a small benchmark
> test ?
> 

Hi Subrata,

Sure, maybe you'll want to use a better interface than a module init
that fails though. :)

Mathieu

> Regards--
> Subrata
> 
> 
> > If some of you would be kind enough to run my test module provided below
> > and provide the results of these tests on a recent kernel (2.6.26~2.6.29
> > should be good) along with their cpuinfo, I would greatly appreciate.
> >
> > Here are the CAS results for various Intel-based architectures :
> >
> > Architecture         | Speedup                      |      CAS     |
> >   Interrupts         |
> >                     | (cli + sti) / local cmpxchg  | local | sync | Enable
> > (sti) | Disable (cli)
> >
> > -------------------------------------------------------------------------------------------------
> > Intel Pentium 4      | 5.24                         |  25   | 81   | 70
> >       | 61          |
> > AMD Athlon(tm)64 X2  | 4.57                         |  7    | 17   | 17
> >       | 15          |
> > Intel Core2          | 6.33                         |  6    | 30   | 20
> >       | 18          |
> > Intel Xeon E5405     | 5.25                         |  8    | 24   | 20
> >       | 22          |
> >
> > The benefit expected on PowerPC, ia64 and alpha should principally come
> > from removed memory barriers in the local primitives.
> >
> > Thanks,
> >
> > Mathieu
> >
> > P.S. please forgive the coding style and hackish interface. :)
> >
> >
> > /* test-cmpxchg-nolock.c
> >  *
> >  * Compare local cmpxchg with irq disable / enable.
> >  */
> >
> >
> > #include <linux/jiffies.h>
> > #include <linux/compiler.h>
> > #include <linux/init.h>
> > #include <linux/module.h>
> > #include <linux/math64.h>
> > #include <asm/timex.h>
> > #include <asm/system.h>
> >
> > #define NR_LOOPS 20000
> >
> > int test_val;
> >
> > static void do_testbaseline(void)
> > {
> >        unsigned long flags;
> >        unsigned int i;
> >        cycles_t time1, time2, time;
> >        u32 rem;
> >
> >        local_irq_save(flags);
> >        preempt_disable();
> >        time1 = get_cycles();
> >        for (i = 0; i < NR_LOOPS; i++) {
> >                asm volatile ("");
> >        }
> >        time2 = get_cycles();
> >        local_irq_restore(flags);
> >        preempt_enable();
> >        time = time2 - time1;
> >
> >        printk(KERN_ALERT "test results: time for baseline\n");
> >        printk(KERN_ALERT "number of loops: %d\n", NR_LOOPS);
> >        printk(KERN_ALERT "total time: %llu\n", time);
> >        time = div_u64_rem(time, NR_LOOPS, &rem);
> >        printk(KERN_ALERT "-> baseline takes %llu cycles\n", time);
> >        printk(KERN_ALERT "test end\n");
> > }
> >
> > static void do_test_sync_cmpxchg(void)
> > {
> >        int ret;
> >        unsigned long flags;
> >        unsigned int i;
> >        cycles_t time1, time2, time;
> >        u32 rem;
> >
> >        local_irq_save(flags);
> >        preempt_disable();
> >        time1 = get_cycles();
> >        for (i = 0; i < NR_LOOPS; i++) {
> > #ifdef CONFIG_X86_32
> >                ret = sync_cmpxchg(&test_val, 0, 0);
> > #else
> >                ret = cmpxchg(&test_val, 0, 0);
> > #endif
> >        }
> >        time2 = get_cycles();
> >        local_irq_restore(flags);
> >        preempt_enable();
> >        time = time2 - time1;
> >
> >        printk(KERN_ALERT "test results: time for locked cmpxchg\n");
> >        printk(KERN_ALERT "number of loops: %d\n", NR_LOOPS);
> >        printk(KERN_ALERT "total time: %llu\n", time);
> >        time = div_u64_rem(time, NR_LOOPS, &rem);
> >        printk(KERN_ALERT "-> locked cmpxchg takes %llu cycles\n", time);
> >        printk(KERN_ALERT "test end\n");
> > }
> >
> > static void do_test_cmpxchg(void)
> > {
> >        int ret;
> >        unsigned long flags;
> >        unsigned int i;
> >        cycles_t time1, time2, time;
> >        u32 rem;
> >
> >        local_irq_save(flags);
> >        preempt_disable();
> >        time1 = get_cycles();
> >        for (i = 0; i < NR_LOOPS; i++) {
> >                ret = cmpxchg_local(&test_val, 0, 0);
> >        }
> >        time2 = get_cycles();
> >        local_irq_restore(flags);
> >        preempt_enable();
> >        time = time2 - time1;
> >
> >        printk(KERN_ALERT "test results: time for non locked cmpxchg\n");
> >        printk(KERN_ALERT "number of loops: %d\n", NR_LOOPS);
> >        printk(KERN_ALERT "total time: %llu\n", time);
> >        time = div_u64_rem(time, NR_LOOPS, &rem);
> >        printk(KERN_ALERT "-> non locked cmpxchg takes %llu cycles\n",
> > time);
> >        printk(KERN_ALERT "test end\n");
> > }
> > static void do_test_sync_inc(void)
> > {
> >        int ret;
> >        unsigned long flags;
> >        unsigned int i;
> >        cycles_t time1, time2, time;
> >        u32 rem;
> >        atomic_t val;
> >
> >        local_irq_save(flags);
> >        preempt_disable();
> >        time1 = get_cycles();
> >        for (i = 0; i < NR_LOOPS; i++) {
> >                ret = atomic_add_return(10, &val);
> >        }
> >        time2 = get_cycles();
> >        local_irq_restore(flags);
> >        preempt_enable();
> >        time = time2 - time1;
> >
> >        printk(KERN_ALERT "test results: time for locked add return\n");
> >        printk(KERN_ALERT "number of loops: %d\n", NR_LOOPS);
> >        printk(KERN_ALERT "total time: %llu\n", time);
> >        time = div_u64_rem(time, NR_LOOPS, &rem);
> >        printk(KERN_ALERT "-> locked add return takes %llu cycles\n", time);
> >        printk(KERN_ALERT "test end\n");
> > }
> >
> >
> > static void do_test_inc(void)
> > {
> >        int ret;
> >        unsigned long flags;
> >        unsigned int i;
> >        cycles_t time1, time2, time;
> >        u32 rem;
> >        local_t loc_val;
> >
> >        local_irq_save(flags);
> >        preempt_disable();
> >        time1 = get_cycles();
> >        for (i = 0; i < NR_LOOPS; i++) {
> >                ret = local_add_return(10, &loc_val);
> >        }
> >        time2 = get_cycles();
> >        local_irq_restore(flags);
> >        preempt_enable();
> >        time = time2 - time1;
> >
> >        printk(KERN_ALERT "test results: time for non locked add return\n");
> >        printk(KERN_ALERT "number of loops: %d\n", NR_LOOPS);
> >        printk(KERN_ALERT "total time: %llu\n", time);
> >        time = div_u64_rem(time, NR_LOOPS, &rem);
> >        printk(KERN_ALERT "-> non locked add return takes %llu cycles\n",
> > time);
> >        printk(KERN_ALERT "test end\n");
> > }
> >
> >
> >
> > /*
> >  * This test will have a higher standard deviation due to incoming
> > interrupts.
> >  */
> > static void do_test_enable_int(void)
> > {
> >        unsigned long flags;
> >        unsigned int i;
> >        cycles_t time1, time2, time;
> >        u32 rem;
> >
> >        local_irq_save(flags);
> >        preempt_disable();
> >        time1 = get_cycles();
> >        for (i = 0; i < NR_LOOPS; i++) {
> >                local_irq_restore(flags);
> >        }
> >        time2 = get_cycles();
> >        local_irq_restore(flags);
> >        preempt_enable();
> >        time = time2 - time1;
> >
> >        printk(KERN_ALERT "test results: time for enabling interrupts
> > (STI)\n");
> >        printk(KERN_ALERT "number of loops: %d\n", NR_LOOPS);
> >        printk(KERN_ALERT "total time: %llu\n", time);
> >        time = div_u64_rem(time, NR_LOOPS, &rem);
> >        printk(KERN_ALERT "-> enabling interrupts (STI) takes %llu
> > cycles\n",
> >                                        time);
> >        printk(KERN_ALERT "test end\n");
> > }
> >
> > static void do_test_disable_int(void)
> > {
> >        unsigned long flags, flags2;
> >        unsigned int i;
> >        cycles_t time1, time2, time;
> >        u32 rem;
> >
> >        local_irq_save(flags);
> >        preempt_disable();
> >        time1 = get_cycles();
> >        for ( i = 0; i < NR_LOOPS; i++) {
> >                local_irq_save(flags2);
> >        }
> >        time2 = get_cycles();
> >        local_irq_restore(flags);
> >        preempt_enable();
> >        time = time2 - time1;
> >
> >        printk(KERN_ALERT "test results: time for disabling interrupts
> > (CLI)\n");
> >        printk(KERN_ALERT "number of loops: %d\n", NR_LOOPS);
> >        printk(KERN_ALERT "total time: %llu\n", time);
> >        time = div_u64_rem(time, NR_LOOPS, &rem);
> >        printk(KERN_ALERT "-> disabling interrupts (CLI) takes %llu
> > cycles\n",
> >                                time);
> >        printk(KERN_ALERT "test end\n");
> > }
> >
> > static void do_test_int(void)
> > {
> >        unsigned long flags;
> >        unsigned int i;
> >        cycles_t time1, time2, time;
> >        u32 rem;
> >
> >        local_irq_save(flags);
> >        preempt_disable();
> >        time1 = get_cycles();
> >        for (i = 0; i < NR_LOOPS; i++) {
> >                local_irq_restore(flags);
> >                local_irq_save(flags);
> >        }
> >        time2 = get_cycles();
> >        local_irq_restore(flags);
> >        preempt_enable();
> >        time = time2 - time1;
> >
> >        printk(KERN_ALERT "test results: time for disabling/enabling
> > interrupts (STI/CLI)\n");
> >        printk(KERN_ALERT "number of loops: %d\n", NR_LOOPS);
> >        printk(KERN_ALERT "total time: %llu\n", time);
> >        time = div_u64_rem(time, NR_LOOPS, &rem);
> >        printk(KERN_ALERT "-> enabling/disabling interrupts (STI/CLI) takes
> > %llu cycles\n",
> >                                        time);
> >        printk(KERN_ALERT "test end\n");
> > }
> >
> >
> >
> > static int ltt_test_init(void)
> > {
> >        printk(KERN_ALERT "test init\n");
> >
> >        do_testbaseline();
> >        do_test_sync_cmpxchg();
> >        do_test_cmpxchg();
> >        do_test_sync_inc();
> >        do_test_inc();
> >        do_test_enable_int();
> >        do_test_disable_int();
> >        do_test_int();
> >        return -EAGAIN; /* Fail will directly unload the module */
> > }
> >
> > static void ltt_test_exit(void)
> > {
> >        printk(KERN_ALERT "test exit\n");
> > }
> >
> > module_init(ltt_test_init)
> > module_exit(ltt_test_exit)
> >
> > MODULE_LICENSE("GPL");
> > MODULE_AUTHOR("Mathieu Desnoyers");
> > MODULE_DESCRIPTION("Cmpxchg vs int Test");
> >
> >
> >
> > * Makefile
> >
> > ifneq ($(KERNELRELEASE),)
> >        obj-m += test-cmpxchg-nolock.o
> > else
> >        KERNELDIR ?= /lib/modules/$(shell uname -r)/build
> >        PWD := $(shell pwd)
> >        KERNELRELEASE = $(shell cat
> > $(KERNELDIR)/$(KBUILD_OUTPUT)/include/linux/version.h | sed -n
> > 's/.*UTS_RELEASE.*\"\(.*\)\".*/\1/p')
> > ifneq ($(INSTALL_MOD_PATH),)
> >        DEPMOD_OPT := -b $(INSTALL_MOD_PATH)
> > endif
> >
> > default:
> >        $(MAKE) -C $(KERNELDIR) M=$(PWD) modules
> >
> > modules_install:
> >        $(MAKE) -C $(KERNELDIR) M=$(PWD) modules_install
> >        if [ -f $(KERNELDIR)/$(KBUILD_OUTPUT)/System.map ] ; then
> > /sbin/depmod -ae -F $(KERNELDIR)/$(KBUILD_OUTPUT)/System.map $(DEPMOD_OPT)
> > $(KERNELRELEASE) ; fi
> >
> >
> > clean:
> >        $(MAKE) -C $(KERNELDIR) M=$(PWD) clean
> > endif
> >
> >
> > --
> > Mathieu Desnoyers
> > OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F  BA06 3F25 A8FE 3BAE 9A68
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to [email protected]
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at  http://www.tux.org/lkml/
> >
> 
> 
> 
> -- 
> Regards & Thanks--
> Subrata

-- 
Mathieu Desnoyers
OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F  BA06 3F25 A8FE 3BAE 9A68

------------------------------------------------------------------------------
Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
easily build your RIAs with Flex Builder, the Eclipse(TM)based development
software that enables intelligent coding and step-through debugging.
Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
_______________________________________________
Ltp-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ltp-list

Reply via email to