I can find that they addressed all issues of Mike and Matt. However, i
would just wait for some more confirmation from them. Thanks.
Regards--
Subrata
On Tue, 2009-07-07 at 10:35 +0200, Jiri Palecek wrote:
> Hello,
>
> this patch reflects the comments by various people to the previous versions.
> It uses "+=1" instead of postincrement because of dash, ['s boolean
> expressions, printf for the formatting. I've left the unzip pushd/popd and
> the signal names issue completely.
>
> Regards
> Jiri Palecek
>
> ---
> runalltests.sh | 58 +++++++++---------
> testcases/commands/cron/cron02 | 4 +-
> testcases/commands/cron/cron03 | 2 +-
> testcases/commands/cron/cron_allow01 | 10 ++--
> testcases/commands/cron/cron_deny01 | 14 ++--
> testcases/commands/su/su01 | 18 +++---
> testcases/kernel/containers/netns/child.sh | 2 +-
> testcases/kernel/containers/netns/child_1.sh | 2 +-
> testcases/kernel/containers/netns/childipv6.sh | 4 +-
> testcases/kernel/containers/netns/childns.sh | 4 +-
> testcases/kernel/containers/netns/delchild.sh | 8 +-
> testcases/kernel/containers/netns/par_ftp.sh | 2 +-
> testcases/kernel/containers/netns/parent.sh | 2 +-
> testcases/kernel/containers/netns/parent_1.sh | 2 +-
> testcases/kernel/containers/netns/parent_2.sh | 2 +-
> testcases/kernel/containers/netns/parentns.sh | 4 +-
> testcases/kernel/containers/netns/paripv6.sh | 4 +-
> testcases/kernel/containers/netns/rename_net.sh | 6 +-
> testcases/kernel/power_management/runpwtests.sh | 32 +++++-----
> .../hyperthreading/ht_enabled/smt_smp_enabled.sh | 2 +-
> testcases/kernel/syscalls/ioctl/test_ioctl | 4 +-
> testcases/misc/tcore_patch_test_suites/tcore.sh | 11 ++--
> testcases/network/iproute/ip_tests.sh | 62
> ++++++++++----------
> testcases/network/ipv6/perf_lan6/perf_lan6 | 4 +-
> testcases/network/ipv6/tcpdump6/tcpdump601 | 2 +-
> testcases/network/multicast/mc_commo/mc_commo | 4 +-
> testcases/network/multicast/mc_member/mc_member | 2 +-
> testcases/network/multicast/mc_opts/mc_opts | 2 +-
> testcases/network/nfs/nfs03/nfs03 | 26 ++++----
> .../network/rpc/basic_tests/rpcinfo/rpcinfo01 | 6 +-
> testcases/network/tcp_cmds/perf_lan/perf_lan | 4 +-
> testcases/network/tcp_cmds/tcpdump/tcpdump01 | 2 +-
> 32 files changed, 156 insertions(+), 155 deletions(-)
>
> diff --git a/runalltests.sh b/runalltests.sh
> index aa7a7d5..b710469 100755
> --- a/runalltests.sh
> +++ b/runalltests.sh
> @@ -29,17 +29,17 @@
> ##
> ##
>
> ################################################################################
>
> -echo -e
> "*******************************************************************"
> -echo -e
> "*******************************************************************"
> -echo -e "**
> **"
> -echo -e "** This script is being re-written to cover all aspects of **"
> -echo -e "** testing LTP, which includes running all those tests which **"
> -echo -e "** are not run by default with ./runltp script. Special setup **"
> -echo -e "** in system environment will be done to run all those tests **"
> -echo -e "** like the File System tests, SELinuxtest, etc **"
> -echo -e "**
> **"
> -echo -e
> "*******************************************************************"
> -echo -e
> "*******************************************************************"
> +echo "*******************************************************************"
> +echo "*******************************************************************"
> +echo "** **"
> +echo "** This script is being re-written to cover all aspects of **"
> +echo "** testing LTP, which includes running all those tests which **"
> +echo "** are not run by default with ./runltp script. Special setup **"
> +echo "** in system environment will be done to run all those tests **"
> +echo "** like the File System tests, SELinuxtest, etc **"
> +echo "** **"
> +echo "*******************************************************************"
> +echo "*******************************************************************"
>
> export LTPROOT=${PWD}
> export RUN_BALLISTA=0
> @@ -210,19 +210,19 @@ export
> HTML_OUTPUT_FILE_NAME=$LTP_VERSION_$HOSTNAME_$KERNEL_VERSION_$HARDWARE_TY
>
> ## The First one i plan to run is the default LTP run ##
> ## START => Test Series 1 ##
> -echo -e "Running Default LTP..."
> +echo "Running Default LTP..."
> ./runltp -g $HTML_OUTPUT_FILE_NAME
> -echo -e "Completed running Default LTP\n\n"
> +printf "Completed running Default LTP\n\n\n"
> ## END => Test Series 1 ##
>
> ## The next one i plan to run is ballista ##
> ## START => Test Series 2 ##
> if [ $RUN_BALLISTA -eq 1 ]
> then
> - echo -e "Running Ballista..."
> + echo "Running Ballista..."
> export TEST_START_TIME=`date +"%Y_%b_%d-%Hh_%Mm_%Ss"`
> ./runltp -f ballista -o
> $LTP_VERSION-BALLISTA_RUN_ON-$HOSTNAME-$KERNEL_VERSION-$HARDWARE_TYPE-$TEST_START_TIME.out
> - echo -e "Completed running Ballista\n\n"
> + printf "Completed running Ballista\n\n\n"
> fi
> ## END => Test Series 2 ##
>
> @@ -230,9 +230,9 @@ fi
> ## START => Test Series 3 ##
> if [ $RUN_OPENPOSIX -eq 1 ]
> then
> - echo -e "Running Open Posix Tests..."
> + echo "Running Open Posix Tests..."
> (cd testcases/open_posix_testsuite; make)
> - echo -e "Completed running Open Posix Tests\n\n"
> + printf "Completed running Open Posix Tests\n\n\n"
> fi
> ## END => Test Series 3 ##
>
> @@ -242,9 +242,9 @@ fi
> ## START => Test Series 4 ##
> if [ $RUN_MM_CORE_APIS -eq 1 ]
> then
> - echo -e "Initializing ltp/testcases/kernel/mem/libmm/mm_core_apis ..."
> + echo "Initializing ltp/testcases/kernel/mem/libmm/mm_core_apis ..."
> # Check to see if User is Root
> - if [ $EUID -ne 0 ]
> + if [ $(id -u) -ne 0 ]
> then
> echo You need to be root to Install libmm and run
> mem/libmm/mm_core_apis
> echo Aborting ltp/testcases/kernel/mem/libmm/mm_core_apis
> @@ -262,13 +262,13 @@ then
> else
> echo libmm-1.4.2 already installed in your system
> fi
> - echo -e "Running ltp/testcases/kernel/mem/libmm/mm_core_apis ..."
> + echo "Running ltp/testcases/kernel/mem/libmm/mm_core_apis ..."
> (cd testcases/kernel/mem/libmm; \
> make; \
> make install; \
> $LTPROOT/testcases/bin/mm_core_apis; )
> fi
> - echo -e "Completed running
> ltp/testcases/kernel/mem/libmm/mm_core_apis...\n\n"
> + printf "Completed running
> ltp/testcases/kernel/mem/libmm/mm_core_apis...\n\n\n"
> fi
> ## END => Test Series 4 ##
>
> @@ -278,9 +278,9 @@ fi
> ## START => Test Series 5 ##
> if [ $RUN_AIOTESTS -eq 1 ]
> then
> - echo -e "Initializing ltp/testcases/kernel/io/aio ..."
> + echo "Initializing ltp/testcases/kernel/io/aio ..."
> # Check to see if User is Root
> - if [ $EUID -ne 0 ]
> + if [ $(id -u) -ne 0 ]
> then
> echo You need to be root to Install libaio-0.3.92 and run
> ltp/testcases/kernel/io/aio
> echo Aborting ltp/testcases/kernel/io/aio
> @@ -298,13 +298,13 @@ if [ $RUN_AIOTESTS -eq 1 ]
> else
> echo libaio-0.3.92 already installed in your system
> fi
> - echo -e "Building & Running ltp/testcases/kernel/io/aio..."
> + echo "Building & Running ltp/testcases/kernel/io/aio..."
> (cd testcases/kernel/io/aio; \
> make > /dev/null; \
> ./aio01/aio01; \
> ./aio02/runfstests.sh -a aio02/cases/aio_tio; \
> make clean 1>&2 > /dev/null )
> - echo -e "Completed running ltp/testcases/kernel/io/aio...\n\n"
> + printf "Completed running ltp/testcases/kernel/io/aio...\n\n\n"
> fi
> fi
> ## END => Test Series 5 ##
> @@ -316,9 +316,9 @@ fi
> ## START => Test Series 6 ##
> if [ $RUN_FILECAPS -eq 1 ]
> then
> - echo -e "Initializing ltp/testcases/kernel/security/filecaps ..."
> + echo "Initializing ltp/testcases/kernel/security/filecaps ..."
> # Check to see if User is Root
> - if [ $EUID -ne 0 ]
> + if [ $(id -u) -ne 0 ]
> then
> echo You need to be root to Install libcaps and run
> ltp/testcases/kernel/security/filecaps
> echo Aborting ltp/testcases/kernel/security/filecaps
> @@ -336,11 +336,11 @@ then
> else
> echo libcaps already installed in your system
> fi
> - echo -e "Building & Running ltp/testcases/kernel/security/filecaps"
> + echo "Building & Running ltp/testcases/kernel/security/filecaps"
> (cd ltp/testcases/kernel/security/filecaps; \
> make && make install > /dev/null; )
> ./runltp -f filecaps
> - echo -e "Completed running ltp/testcases/kernel/io/aio...\n\n"
> + printf "Completed running ltp/testcases/kernel/io/aio...\n\n\n"
> fi
> fi
> ## END => Test Series 6 ##
> diff --git a/testcases/commands/cron/cron02 b/testcases/commands/cron/cron02
> index c1dc245..6e4d8fe 100755
> --- a/testcases/commands/cron/cron02
> +++ b/testcases/commands/cron/cron02
> @@ -37,7 +37,7 @@ TEST_USER_HOMEDIR="/home/$TEST_USER"
>
> do_setup(){
> #erase any data from potential defunt cron test
> - rm -rf /tmp/crontest &> /dev/null
> + rm -rf /tmp/crontest > /dev/null 2>&1
>
> #erase user if he may exist , so we can have a clean env
> rm -rf /home/$TEST_USER
> @@ -56,7 +56,7 @@ do_setup(){
> # Red Hat uses crond, SuSE/Other uses cron. Check if this is Red
> Hat/SuSE/Other
> tvar=${MACHTYPE%-*}
> tvar=${tvar#*-}
> -echo "Distro type is: $tvar \n"
> +printf "Distro type is: $tvar\n\n"
>
> if [ $tvar != "redhat" -a $tvar != "redhat-linux" ]; then
>
> diff --git a/testcases/commands/cron/cron03 b/testcases/commands/cron/cron03
> index 58fbe1b..9448cc4 100755
> --- a/testcases/commands/cron/cron03
> +++ b/testcases/commands/cron/cron03
> @@ -59,7 +59,7 @@ do_setup(){
> # Red Hat uses crond, SuSE/Other uses cron. Check if this is Red
> Hat/SuSE/Other
> tvar=${MACHTYPE%-*}
> tvar=${tvar#*-}
> -echo "Distro type is: $tvar \n"
> +printf "Distro type is: $tvar\n\n"
>
> if [ $tvar != "redhat" -a $tvar != "redhat-linux" ]; then
>
> diff --git a/testcases/commands/cron/cron_allow01
> b/testcases/commands/cron/cron_allow01
> index 839ad81..266700a 100755
> --- a/testcases/commands/cron/cron_allow01
> +++ b/testcases/commands/cron/cron_allow01
> @@ -47,9 +47,9 @@ TEST_USER2_HOME="/home/$TEST_USER2"
>
> do_setup() {
> #move any files that may get in the way
> - rm /tmp/cron_allow_test &> /dev/null
> - rm /tmp/cron_allow_test1 &> /dev/null
> - mv $CRON_ALLOW $CRON_ALLOW.old &> /dev/null
> + rm /tmp/cron_allow_test > /dev/null 2>&1
> + rm /tmp/cron_allow_test1 > /dev/null 2>&1
> + mv $CRON_ALLOW $CRON_ALLOW.old > /dev/null 2>&1
>
> #remove users for clean enviroment
> su $TEST_USER1 -c "crontab -r"
> @@ -90,8 +90,8 @@ do_cleanup(){
> userdel $TEST_USER1
> userdel $TEST_USER2
> rm $CRON_ALLOW
> - mv $CRON_ALLOW.old $CRON_ALLOW &> /dev/null
> - rm /tmp/cron_allow_test &>/dev/null
> + mv $CRON_ALLOW.old $CRON_ALLOW > /dev/null 2>&1
> + rm /tmp/cron_allow_test >/dev/null 2>&1
> }
>
> #-----------------------------------------------------------------------
> diff --git a/testcases/commands/cron/cron_deny01
> b/testcases/commands/cron/cron_deny01
> index f7f8fd4..527d79c 100755
> --- a/testcases/commands/cron/cron_deny01
> +++ b/testcases/commands/cron/cron_deny01
> @@ -49,11 +49,11 @@ TEST_USER2_HOME="/home/$TEST_USER2"
>
> do_setup() {
> #move any files that may get in the way
> - rm /tmp/cron_deny_test &> /dev/null
> - rm /tmp/cron_deny_test1 &> /dev/null
> + rm /tmp/cron_deny_test > /dev/null 2>&1
> + rm /tmp/cron_deny_test1 > /dev/null 2>&1
>
> - mv $CRON_DENY $CRON_DENY.old &> /dev/null
> - mv $CRON_ALLOW $CRON_ALLOW.old &> /dev/null
> + mv $CRON_DENY $CRON_DENY.old > /dev/null 2>&1
> + mv $CRON_ALLOW $CRON_ALLOW.old > /dev/null 2>&1
>
> #remove users for clean enviroment
> su $TEST_USER1 -c "crontab -r"
> @@ -94,9 +94,9 @@ do_cleanup(){
> userdel $TEST_USER1
> userdel $TEST_USER2
> rm $CRON_DENY
> - mv $CRON_DENY.old $CRON_DENY &> /dev/null
> - mv $CRON_ALLOW.old $CRON_ALLOW &> /dev/null
> - rm /tmp/cron_allow_test &>/dev/null
> + mv $CRON_DENY.old $CRON_DENY > /dev/null 2>&1
> + mv $CRON_ALLOW.old $CRON_ALLOW > /dev/null 2>&1
> + rm /tmp/cron_allow_test >/dev/null 2>&1
> }
>
> #-----------------------------------------------------------------------
> diff --git a/testcases/commands/su/su01 b/testcases/commands/su/su01
> index e6b8a05..91548c7 100755
> --- a/testcases/commands/su/su01
> +++ b/testcases/commands/su/su01
> @@ -41,7 +41,7 @@ tvar=${tvar#*-}
>
> # need to export tvar for su01_s1
> export tvar
> -echo "Machine type is: $tvar \n"
> +printf "Machine type is: $tvar\n\n"
>
> if [ $tvar = "redhat" -o $tvar = "redhat-linux" ]
> # Need to also set group for TEST_USER2
> @@ -76,9 +76,9 @@ export TEST_ENV_FILE2="/tmp/TEST_ENV_FILE_ROOT2"
> do_setup(){
>
> #REMOVE ANY TEMPOARY FILES THAT MAY STILL BE AROUND
> -rm -f $TEST_ENV_FILE_USER &> /dev/null
> -rm -f $TEST_ENV_FILE2 &> /dev/null
> -rm -f $TEST_ENV_FILE &> /dev/null
> +rm -f $TEST_ENV_FILE_USER > /dev/null 2>&1
> +rm -f $TEST_ENV_FILE2 > /dev/null 2>&1
> +rm -f $TEST_ENV_FILE > /dev/null 2>&1
>
>
> #Create 1st test user
> @@ -108,7 +108,7 @@ rm -f $TEST_ENV_FILE &> /dev/null
> }
> fi
>
> - usermod -p $TEST_USER1_ENCRYPTED_PASSWD $TEST_USER1 &> /dev/null
> + usermod -p $TEST_USER1_ENCRYPTED_PASSWD $TEST_USER1 > /dev/null 2>&1
> if [ $? != 0 ]
> then {
> echo "Could not set password for test user $TEST_USER1"
> @@ -144,7 +144,7 @@ rm -f $TEST_ENV_FILE &> /dev/null
> }
> fi
>
> - usermod -p $TEST_USER2_ENCRYPTED_PASSWD $TEST_USER2 &> /dev/null
> + usermod -p $TEST_USER2_ENCRYPTED_PASSWD $TEST_USER2 > /dev/null 2>&1
> if [ $? != 0 ]
> then {
> echo "Could not set password for test user $TEST_USER2"
> @@ -164,9 +164,9 @@ do_cleanup() {
> userdel $TEST_USER1
> userdel $TEST_USER2
> #REMOVE ANY TEMPOARY FILES THAT MAY STILL BE AROUND
> - rm -f $TEST_ENV_FILE_USER &> /dev/null
> - rm -f $TEST_ENV_FILE2 &> /dev/null
> - rm -f $TEST_ENV_FILE &> /dev/null
> + rm -f $TEST_ENV_FILE_USER > /dev/null 2>&1
> + rm -f $TEST_ENV_FILE2 > /dev/null 2>&1
> + rm -f $TEST_ENV_FILE > /dev/null 2>&1
> }
>
> #-----------------------------------------------------------------------
> diff --git a/testcases/kernel/containers/netns/child.sh
> b/testcases/kernel/containers/netns/child.sh
> index a7fbc4b..6e8ed62 100755
> --- a/testcases/kernel/containers/netns/child.sh
> +++ b/testcases/kernel/containers/netns/child.sh
> @@ -34,7 +34,7 @@ export TST_TOTAL
>
> ping -qc 2 $IP1 > /dev/null
>
> - if [ $? == 0 ] ; then
> + if [ $? = 0 ] ; then
> tst_resm TINFO "PASS: Pinging ParentNS from ChildNS"
> status=0
> else
> diff --git a/testcases/kernel/containers/netns/child_1.sh
> b/testcases/kernel/containers/netns/child_1.sh
> index d44eebd..1fa71a7 100755
> --- a/testcases/kernel/containers/netns/child_1.sh
> +++ b/testcases/kernel/containers/netns/child_1.sh
> @@ -65,7 +65,7 @@ export TST_TOTAL
> # Pinging CHILD2 from CHILD1
> debug "INFO: Trying for pinging CHILD2..."
> ping -qc 2 $IP4 > /dev/null
> - if [ $? == 0 ];
> + if [ $? = 0 ];
> then
> tst_resm TINFO "PASS: Child2 is pinging from CHILD1 !"
> else
> diff --git a/testcases/kernel/containers/netns/childipv6.sh
> b/testcases/kernel/containers/netns/childipv6.sh
> index 4e904be..54bd6e6 100755
> --- a/testcases/kernel/containers/netns/childipv6.sh
> +++ b/testcases/kernel/containers/netns/childipv6.sh
> @@ -52,7 +52,7 @@ status=0
>
> #starting the sshd inside the child NS
> /usr/sbin/sshd -p $PORT
> - if [ $? == 0 ]; then
> + if [ $? = 0 ]; then
> debug "INFO: started the sshd @ port no $PORT"
> sshpid=`ps -ef | grep "sshd -p $PORT" | awk '{ print $2 ; exit 0} ' `
> else
> @@ -68,7 +68,7 @@ status=0
>
> # checking if parent ns responding
> ping6 -I $vnet1 -qc 2 $parIPv6 >/dev/null 2>&1
> - if [ $? == 0 ] ; then
> + if [ $? = 0 ] ; then
> tst_resm TINFO "IPv6: Pinging Parent from Child: PASS"
> else
> tst_resm TFAIL "IPv6: Pinging Parent from Child: FAIL"
> diff --git a/testcases/kernel/containers/netns/childns.sh
> b/testcases/kernel/containers/netns/childns.sh
> index 6fe47ab..5a831ba 100755
> --- a/testcases/kernel/containers/netns/childns.sh
> +++ b/testcases/kernel/containers/netns/childns.sh
> @@ -41,7 +41,7 @@ export TST_TOTAL
> . initialize.sh
> status=0
>
> - if [ $# == 1 ] ; then
> + if [ $# = 1 ] ; then
> childscrpt=$1
> debug "INFO: The script to be executed in child NS is $childscrpt"
> fi
> @@ -63,7 +63,7 @@ status=0
>
> #starting the sshd inside the child NS
> /usr/sbin/sshd -p $PORT
> - if [ $? == 0 ]; then
> + if [ $? = 0 ]; then
> debug "INFO: started the sshd @ port no $PORT"
> sshpid=`ps -ef | grep "sshd -p $PORT" | awk '{ print $2 ; exit 0} ' `
> else
> diff --git a/testcases/kernel/containers/netns/delchild.sh
> b/testcases/kernel/containers/netns/delchild.sh
> index 88822f2..d294e26 100755
> --- a/testcases/kernel/containers/netns/delchild.sh
> +++ b/testcases/kernel/containers/netns/delchild.sh
> @@ -41,7 +41,7 @@ export TST_TOTAL
> newnet=`cat /tmp/FIFO4`
> debug "INFO: new dev is $newnet"
>
> - if [ $newnet == -1 ] ; then
> + if [ $newnet = -1 ] ; then
> status=-1
> fi
>
> @@ -50,17 +50,17 @@ export TST_TOTAL
>
> debug "INFO: Deleting the child NS created.. "
> debug "INFO: Killing processes $sshpid $pid"
> kill -9 $sshpid $pid > /dev/null 2>&1
> sleep 1
>
> ls /sys/class/net > /tmp/sys_aftr_child_killed
> diff -q /tmp/sys_b4_child_killed /tmp/sys_aftr_child_killed
>
> - if [ $? == 0 ] ; then
> + if [ $? = 0 ] ; then
> debug "INFO: No difference in the contents of sysfs after deleting
> the child"
> else
> grep -qw $newnet /tmp/sys_aftr_child_killed
> - if [ $? == 0 ]; then
> + if [ $? = 0 ]; then
> debug "INFO: Device $newnet is moved to ParentNS"
> else
> debug "INFO: Device $newnet is moved under diff name in ParentNS"
> diff --git a/testcases/kernel/containers/netns/par_ftp.sh
> b/testcases/kernel/containers/netns/par_ftp.sh
> index fa672a4..3bfb47b 100755
> --- a/testcases/kernel/containers/netns/par_ftp.sh
> +++ b/testcases/kernel/containers/netns/par_ftp.sh
> @@ -35,7 +35,7 @@ export TST_TOTAL
>
> ping -q -c 2 $IP2 > /dev/null
>
> - if [ $? == 0 ] ; then
> + if [ $? = 0 ] ; then
> tst_resm TINFO "Pinging ChildNS from ParentNS"
> else
> tst_resm TFAIL "Error: Unable to ping ChildNS from ParentNS"
> diff --git a/testcases/kernel/containers/netns/parent.sh
> b/testcases/kernel/containers/netns/parent.sh
> index a12f284..61bb500 100755
> --- a/testcases/kernel/containers/netns/parent.sh
> +++ b/testcases/kernel/containers/netns/parent.sh
> @@ -33,7 +33,7 @@ export TST_COUNT
> export TST_TOTAL
>
> ping -q -c 2 $IP2 > /dev/null
> - if [ $? == 0 ] ; then
> + if [ $? = 0 ] ; then
> tst_resm TINFO "PASS: Pinging ChildNS from ParentNS"
> status=0
> else
> diff --git a/testcases/kernel/containers/netns/parent_1.sh
> b/testcases/kernel/containers/netns/parent_1.sh
> index b42436e..1b91a58 100755
> --- a/testcases/kernel/containers/netns/parent_1.sh
> +++ b/testcases/kernel/containers/netns/parent_1.sh
> @@ -38,7 +38,7 @@ export TST_TOTAL
> create_veth
> vnet0=$dev0
> vnet1=$dev1
> - if [[ -z $vnet0 || -z $vnet1 ]] ; then
> + if [ -z "$vnet0" -o -z "$vnet1" ] ; then
> tst_resm TFAIL "Error: unable to create veth pair in $0"
> exit -1
> else
> diff --git a/testcases/kernel/containers/netns/parent_2.sh
> b/testcases/kernel/containers/netns/parent_2.sh
> index 86eb172..c39bc7c 100755
> --- a/testcases/kernel/containers/netns/parent_2.sh
> +++ b/testcases/kernel/containers/netns/parent_2.sh
> @@ -35,7 +35,7 @@ export TST_TOTAL
> vnet2=$dev0
> vnet3=$dev1
>
> - if [[ -z $vnet2 || -z $vnet3 ]] ; then
> + if [ -z "$vnet2" -o -z "$vnet3" ] ; then
> tst_resm TFAIL "Error: unable to create veth pair in $0"
> exit -1
> else
> diff --git a/testcases/kernel/containers/netns/parentns.sh
> b/testcases/kernel/containers/netns/parentns.sh
> index 43cdcdb..b6488a4 100755
> --- a/testcases/kernel/containers/netns/parentns.sh
> +++ b/testcases/kernel/containers/netns/parentns.sh
> @@ -43,7 +43,7 @@ export TST_TOTAL
> status=0
>
> # Checks if any script is passed as argument.
> - if [ $# == 2 ]; then
> + if [ $# = 2 ]; then
> scrpt=$1
> debug "INFO: Script to be executed in parent NS is $scrpt"
> fi
> @@ -56,7 +56,7 @@ status=0
> create_veth
> vnet0=$dev0
> vnet1=$dev1
> - if [[ -z $vnet0 || -z $vnet1 ]] ; then
> + if [ -z "$vnet0" -o -z "$vnet1" ] ; then
> tst_resm TFAIL "Error: unable to create veth pair"
> exit -1
> else
> diff --git a/testcases/kernel/containers/netns/paripv6.sh
> b/testcases/kernel/containers/netns/paripv6.sh
> index 568c86f..67c8636 100755
> --- a/testcases/kernel/containers/netns/paripv6.sh
> +++ b/testcases/kernel/containers/netns/paripv6.sh
> @@ -49,7 +49,7 @@ status=0
> create_veth
> vnet0=$dev0
> vnet1=$dev1
> - if [[ -z $vnet0 || -z $vnet1 ]] ; then
> + if [ -z "$vnet0" -o -z "$vnet1" ] ; then
> tst_resm TFAIL "Error: unable to create veth pair"
> exit -1
> else
> @@ -76,7 +76,7 @@ status=0
> echo $parIPv6 > /tmp/FIFO4
> ping6 -I $vnet0 -qc 2 $childIPv6 >/dev/null 2>&1
>
> - if [ $? == 0 ] ; then
> + if [ $? = 0 ] ; then
> tst_resm TINFO "IPv6: Pinging child from parent: PASS"
> status=0
> else
> diff --git a/testcases/kernel/containers/netns/rename_net.sh
> b/testcases/kernel/containers/netns/rename_net.sh
> index cadf7e2..ffbe07f 100755
> --- a/testcases/kernel/containers/netns/rename_net.sh
> +++ b/testcases/kernel/containers/netns/rename_net.sh
> @@ -46,9 +46,9 @@ export TST_TOTAL
> ip link set $vnet1 name $newdev
> ifconfig $newdev $IP2/24 up > /dev/null 2>&1
>
> - if [ $? == 0 ] ; then
> + if [ $? = 0 ] ; then
> tst_resm TINFO "Successfully Renamed device to $newdev"
> - if [ DEBUG == 1 ]; then
> + if [ "$DEBUG" = 1 ]; then
> ifconfig
> fi
> else
> @@ -56,7 +56,7 @@ export TST_TOTAL
> status=-1
> fi
>
> - if [ $status == 0 ] ; then
> + if [ $status = 0 ] ; then
> echo $sshpid > /tmp/FIFO3
> echo $newdev > /tmp/FIFO4
> else
> diff --git a/testcases/kernel/power_management/runpwtests.sh
> b/testcases/kernel/power_management/runpwtests.sh
> index 00c8126..e1a25ce 100755
> --- a/testcases/kernel/power_management/runpwtests.sh
> +++ b/testcases/kernel/power_management/runpwtests.sh
> @@ -77,7 +77,7 @@ else
> fi
>
> # Test sched_smt_power_savings interface on HT machines
> -((TST_COUNT= $TST_COUNT + 1))
> +: $(( TST_COUNT += 1 ))
> if [ -f /sys/devices/system/cpu/sched_smt_power_savings ] ; then
> if test_sched_smt.sh; then
> tst_resm TPASS "SCHED_SMT sysfs test"
> @@ -96,7 +96,7 @@ fi
>
> # Checking cpufreq sysfs interface files
> #check_config.sh config_cpu_freq || RC=$?
> -((TST_COUNT= $TST_COUNT + 1))
> +: $(( TST_COUNT += 1 ))
> if [ -d /sys/devices/system/cpu/cpu0/cpufreq ] ; then
> if check_cpufreq_sysfs_files.sh; then
> tst_resm TPASS "CPUFREQ sysfs tests"
> @@ -106,7 +106,7 @@ if [ -d /sys/devices/system/cpu/cpu0/cpufreq ] ; then
> fi
>
> # Changing governors
> - ((TST_COUNT= $TST_COUNT + 1))
> + : $(( TST_COUNT += 1 ))
> if change_govr.sh; then
> tst_resm TPASS "Changing governors "
> else
> @@ -115,7 +115,7 @@ if [ -d /sys/devices/system/cpu/cpu0/cpufreq ] ; then
> fi
>
> # Changing frequencies
> - ((TST_COUNT= $TST_COUNT + 1))
> + : $(( TST_COUNT += 1 ))
> if change_freq.sh ; then
> tst_resm TPASS "Changing frequncies "
> else
> @@ -124,7 +124,7 @@ if [ -d /sys/devices/system/cpu/cpu0/cpufreq ] ; then
> fi
>
> # Loading and Unloading governor related kernel modules
> - ((TST_COUNT= $TST_COUNT + 1))
> + : $(( TST_COUNT += 1 ))
> if pwkm_load_unload.sh ; then
> tst_resm TPASS "Loading and Unloading of governor kernel \
> modules"
> @@ -138,7 +138,7 @@ else
> fi
>
> # Checking cpuidle sysfs interface files
> -(( TST_COUNT= $TST_COUNT +1))
> +: $(( TST_COUNT+=1))
> if check_cpuidle_sysfs_files.sh ; then
> tst_resm TPASS "CPUIDLE sysfs tests passed"
> else
> @@ -154,21 +154,21 @@ test cannot run"
> else
> get_max_sched_mc; max_sched_mc=$?
> for sched_mc in `seq 0 $max_sched_mc`; do
> - (( TST_COUNT= $TST_COUNT +1))
> + : $(( TST_COUNT+=1))
> sched_domain.py -c $sched_mc; RC=$?
> analyze_sched_domain_result $sched_mc $RC
> if [ $hyper_threaded -eq $YES ]; then
> get_max_sched_smt ; max_sched_smt=$?
> for sched_smt in `seq 0 $max_sched_smt`; do
> # Testcase to validate sched_domain tree
> - (( TST_COUNT= $TST_COUNT +1))
> + : $(( TST_COUNT+=1))
> sched_domain.py -c $sched_mc -t $sched_smt;
> RC=$?
> analyze_sched_domain_result $sched_mc $RC
> $sched_smt ;
> done
> fi
> done
> fi
> -if [ $# -gt 0 -a $1 == "-exclusive" ]; then
> +if [ $# -gt 0 -a "$1" = "-exclusive" ]; then
> # Test CPU consolidation
> which python > /dev/null
> if [ $? -ne 0 ] ; then
> @@ -180,12 +180,12 @@ if [ $# -gt 0 -a $1 == "-exclusive" ]; then
> for sched_mc in `seq 0 $max_sched_mc`; do
> for work_load in ${work_loads_list}
> do
> - ((TST_COUNT= $TST_COUNT + 1))
> + : $(( TST_COUNT += 1 ))
> sched_mc_pass_cnt=0
> for repeat_test in `seq 1 10`; do
> #Testcase to validate CPU
> consolidation for sched_mc
> if cpu_consolidation.py -c $sched_mc -w
> $work_load ; then
> - ((sched_mc_pass_cnt=
> $sched_mc_pass_cnt +1))
> + : $(( sched_mc_pass_cnt += 1 ))
> fi
> done
> analyze_consolidation_result $sched_mc
> $work_load $sched_mc_pass_cnt
> @@ -193,13 +193,13 @@ if [ $# -gt 0 -a $1 == "-exclusive" ]; then
> if [ $hyper_threaded -eq $YES ]; then
> for sched_smt in `seq 0 $max_sched_smt`; do
> for work_load in ${work_loads_list}; do
> - ((TST_COUNT= $TST_COUNT + 1))
> + : $(( TST_COUNT += 1 ))
> sched_mc_smt_pass_cnt=0
> for repeat_test in `seq 1 10`;
> do
> # Testcase to validate
> CPU consolidation for
> # for sched_mc &
> sched_smt with stress=50%
> if cpu_consolidation.py
> -c $sched_mc -t $sched_smt -w $work_load; then
> -
> ((sched_mc_smt_pass_cnt= $sched_mc_smt_pass_cnt +1))
> + : $((
> sched_mc_smt_pass_cnt += 1 ))
> fi
> done
> analyze_consolidation_result
> $sched_mc $work_load $sched_mc_smt_pass_cnt $sched_smt
> @@ -207,10 +207,10 @@ if [ $# -gt 0 -a $1 == "-exclusive" ]; then
> #Testcase to validate
> consolidation at core level
> sched_mc_smt_pass_cnt=0
> stress="thread"
> - ((TST_COUNT= $TST_COUNT + 1))
> + : $(( TST_COUNT += 1 ))
> for repeat_test in `seq 1 10`;
> do
> if cpu_consolidation.py
> -c $sched_mc -t $sched_smt -w $work_load -s $stress; then
> -
> ((sched_mc_smt_pass_cnt= $sched_mc_smt_pass_cnt +1))
> + : $((
> sched_mc_smt_pass_cnt += 1 ))
> fi
> done
> analyze_consolidation_result
> $sched_mc $work_load $sched_mc_smt_pass_cnt $sched_smt $stress
> diff --git
> a/testcases/kernel/sched/hyperthreading/ht_enabled/smt_smp_enabled.sh
> b/testcases/kernel/sched/hyperthreading/ht_enabled/smt_smp_enabled.sh
> index 85d42a3..8b8a909 100755
> --- a/testcases/kernel/sched/hyperthreading/ht_enabled/smt_smp_enabled.sh
> +++ b/testcases/kernel/sched/hyperthreading/ht_enabled/smt_smp_enabled.sh
> @@ -64,7 +64,7 @@ else
> cpu_cores=`cat /proc/cpuinfo | grep "cpu cores" | cut -f 2 -d ':'\
> | sed 's/ //' | uniq`
>
> - if [ $cpu_cores == 1 ];then
> + if [ $cpu_cores -eq 1 ];then
> tst_resm TPASS "SMT is enable"
> elif [ $cpu_cores -ge 2 ];then
> tst_resm TPASS "SMP System"
> diff --git a/testcases/kernel/syscalls/ioctl/test_ioctl
> b/testcases/kernel/syscalls/ioctl/test_ioctl
> index 2ea3e39..7ae9e71 100755
> --- a/testcases/kernel/syscalls/ioctl/test_ioctl
> +++ b/testcases/kernel/syscalls/ioctl/test_ioctl
> @@ -25,7 +25,7 @@ export TST_COUNT=0
>
> for tttype in `ls /dev/tty*`
> do
> -device_no=${tttype:8}
> +device_no=${tttype#/dev/tty}
> case "$device_no" in
> [0-9]|[0-9][0-9])
> tst_resm TINFO "Testing ioctl01 with $tttype"
> @@ -43,7 +43,7 @@ done
>
> for tttype in `ls /dev/tty*`
> do
> -device_no=${tttype:8}
> +device_no=${tttype#/dev/tty}
> case "$device_no" in
> [0-9]|[0-9][0-9])
> tst_resm TINFO "Testing ioctl02 with $tttype"
> diff --git a/testcases/misc/tcore_patch_test_suites/tcore.sh
> b/testcases/misc/tcore_patch_test_suites/tcore.sh
> index f087fa7..4b032dc 100755
> --- a/testcases/misc/tcore_patch_test_suites/tcore.sh
> +++ b/testcases/misc/tcore_patch_test_suites/tcore.sh
> @@ -107,13 +107,13 @@ Test_gen_core()
> rm -f core.*
> fi
> pid=`$BIN_DIR/tcore |grep "consumer pid"|awk '{print $2}'|cut -d = -f 2`
> - echo -e "Test whether we can generate the needed core file"
> + echo "Test whether we can generate the needed core file"
> if [ -f core.* ];then
> - echo -e "PASS"
> + echo "PASS"
> pass=`expr $pass + 1`
> return 0
> else
> - echo -e "FAIL"
> + echo "FAIL"
> fail=`expr $fail + 1`
> return 1
> fi
> @@ -124,14 +124,14 @@ Test_core_file()
> cd $TEST_DIR
> prepare_gdb
> mv -f $TEST_DIR/core.* $TEST_DIR/corefile >/dev/null 2>&1
> - echo -e "Test whether the core support bt,fpu and threads commands "
> + echo "Test whether the core support bt,fpu and threads commands "
> expect $BIN_DIR/tcore.exp
> return=$?
> pass=`expr $pass + $return`
> fail=`expr 3 - $return + $fail`
> }
>
> -echo -e "Test Tcore patch "
> +echo "Test Tcore patch "
> check_install
> Test_gen_core
> Test_core_file
> diff --git a/testcases/network/iproute/ip_tests.sh
> b/testcases/network/iproute/ip_tests.sh
> index c622700..59322b6 100755
> --- a/testcases/network/iproute/ip_tests.sh
> +++ b/testcases/network/iproute/ip_tests.sh
> @@ -61,7 +61,7 @@ init()
> trap "cleanup" 0
>
> # create the tmp directory for this testcase.
> - mkdir -p $LTPTMP/ &>/dev/null || RC=$?
> + mkdir -p $LTPTMP/ >/dev/null 2>&1 || RC=$?
> if [ $RC -ne 0 ]
> then
> tst_brkm TBROK "INIT: Unable to create temporary directory"
> @@ -69,7 +69,7 @@ init()
> fi
>
> # Check to see if test harness functions are in the path.
> - which tst_resm &>$LTPTMP/tst_ip.err || RC=$?
> + which tst_resm >$LTPTMP/tst_ip.err 2>&1 || RC=$?
> if [ $RC -ne 0 ]
> then
> tst_brkm TBROK NULL \
> @@ -77,7 +77,7 @@ init()
> return $RC
> fi
>
> - which awk &>$LTPTMP/tst_ip.err || RC=$?
> + which awk >$LTPTMP/tst_ip.err 2>&1 || RC=$?
> if [ $RC -ne 0 ]
> then
> tst_brkm TBROK NULL \
> @@ -85,7 +85,7 @@ init()
> return $RC
> fi
>
> - which ip &>$LTPTMP/tst_ip.err || RC=$?
> + which ip >$LTPTMP/tst_ip.err 2>&1 || RC=$?
> if [ $RC -ne 0 ]
> then
> tst_brkm TBROK NULL \
> @@ -93,7 +93,7 @@ init()
> return $RC
> fi
>
> - which ifconfig &>$LTPTMP/tst_ip.err || RC=$?
> + which ifconfig >$LTPTMP/tst_ip.err 2>&1 || RC=$?
> if [ $RC -ne 0 ]
> then
> tst_brkm TBROK NULL \
> @@ -104,13 +104,13 @@ init()
> tst_resm TINFO "INIT: Inititalizing tests."
>
> # Aliasing eth0 to create private network.
> - /sbin/ifconfig eth0:1 10.1.1.12 &>$LTPTMP/tst_ip.err || RC=$?
> + /sbin/ifconfig eth0:1 10.1.1.12 >$LTPTMP/tst_ip.err 2>&1 || RC=$?
> if [ $RC -ne 0 ]
> then
> tst_brk TBROK "INIT: failed aliasing eth0:1 with IP 10.1.1.12"
> return $RC
> else
> - /sbin/route add -host 10.1.1.12 dev eth0:1 &>$LTPTMP/tst_ip.err
> \
> + /sbin/route add -host 10.1.1.12 dev eth0:1 >$LTPTMP/tst_ip.err
> 2>&1 \
> || RC=$?
> if [ $RC -ne 0 ]
> then
> @@ -153,10 +153,10 @@ cleanup()
> TST_COUNT=0
> RC=0
>
> - /sbin/ifconfig eth0:1 &>$LTPTMP/tst_ip.err || RC=$?
> + /sbin/ifconfig eth0:1 >$LTPTMP/tst_ip.err 2>&1 || RC=$?
> if [ $RC -eq 0 ]
> then
> - /sbin/ifconfig eth0:1 down &>$LTPTMP/tst_ip.err
> + /sbin/ifconfig eth0:1 down >$LTPTMP/tst_ip.err 2>&1
> fi
>
> rm -fr $LTPTMP
> @@ -187,7 +187,7 @@ test01()
>
> tst_resm TINFO "Test #1: changing mtu size of eth0:1 device."
>
> - ip link set eth0:1 mtu 300 &>$LTPTMP/tst_ip.err
> + ip link set eth0:1 mtu 300 >$LTPTMP/tst_ip.err 2>&1
> if [ $RC -ne 0 ]
> then
> tst_res TFAIL $LTPTMP/tst_ip.err \
> @@ -232,7 +232,7 @@ test02()
> tst_resm TINFO \
> "Test #2: Installing dummy.o in kernel"
>
> - modprobe dummy &>$LTPTMP/tst_ip.out || RC=$?
> + modprobe dummy >$LTPTMP/tst_ip.out 2>&1 || RC=$?
> if [ $RC -ne 0 ]
> then
> tst_brk TBROK $LTPTMP/tst_ip.out NULL \
> @@ -240,7 +240,7 @@ test02()
> return $RC
> fi
>
> - ip link show dummy0 | grep dummy0 &>$LTPTMP/tst_ip.err || RC=$?
> + ip link show dummy0 | grep dummy0 >$LTPTMP/tst_ip.err 2>&1 || RC=$?
> if [ $RC -ne 0 ]
> then
> tst_res TFAIL $LTPTMP/tst_ip.err "Test #2: ip command failed.
> Reason:"
> @@ -278,7 +278,7 @@ test03()
> tst_resm TINFO \
> "Test #3: ip addr add - adds a new protolcol address to the device"
>
> - ip addr add 127.6.6.6 dev lo &>$LTPTMP/tst_ip.err || RC=$?
> + ip addr add 127.6.6.6 dev lo >$LTPTMP/tst_ip.err 2>&1 || RC=$?
> if [ $RC -ne 0 ]
> then
> tst_res TFAIL $LTPTMP/tst_ip.err \
> @@ -287,7 +287,7 @@ test03()
> else
> tst_resm TINFO \
> "Test #3: ip addr show dev <device> - shows protocol address."
> - ip addr show dev lo | grep 127.6.6.6 &>$LTPTMP/tst_ip.err ||
> RC=$?
> + ip addr show dev lo | grep 127.6.6.6 >$LTPTMP/tst_ip.err 2>&1
> || RC=$?
> if [ $RC -ne 0 ]
> then
> tst_res TFAIL $LTPTMP/tst_ip.err \
> @@ -297,14 +297,14 @@ test03()
>
> tst_resm TINFO \
> "Test #3: ip addr del <ip> dev <device> - deletes protocol
> address."
> - ip addr del 127.6.6.6 dev lo &>$LTPTMP/tst_ip.err || RC=$?
> + ip addr del 127.6.6.6 dev lo >$LTPTMP/tst_ip.err 2>&1 || RC=$?
> if [ $RC -ne 0 ]
> then
> tst_res TFAIL $LTPTMP/tst_ip.err \
> "Test #3: ip addr del command failed. Reason: "
> return $RC
> else
> - ip addr show dev lo | grep 127.6.6.6
> &>$LTPTMP/tst_ip.err || RC=$?
> + ip addr show dev lo | grep 127.6.6.6
> >$LTPTMP/tst_ip.err 2>&1 || RC=$?
> if [ $RC -eq 0 ]
> then
> tst_res TFAIL $LTPTMP/tst_ip.err \
> @@ -343,7 +343,7 @@ test04()
> tst_resm TINFO \
> "Test #4: ip neigh add - adds a new neighbour to arp tables."
>
> - ip neigh add 127.0.0.1 dev lo nud reachable &>$LTPTMP/tst_ip.err ||
> RC=$?
> + ip neigh add 127.0.0.1 dev lo nud reachable >$LTPTMP/tst_ip.err 2>&1 ||
> RC=$?
> if [ $RC -ne 0 ]
> then
> tst_res TFAIL $LTPTMP/tst_ip.err \
> @@ -357,7 +357,7 @@ test04()
> 127.0.0.1 dev lo lladdr 00:00:00:00:00:00 nud reachable
> EOF
>
> - ip neigh show 127.0.0.1 | head -n1 &>$LTPTMP/tst_ip.out || RC=$?
> + ip neigh show 127.0.0.1 | head -n1 >$LTPTMP/tst_ip.out 2>&1 ||
> RC=$?
> if [ $RC -ne 0 ]
> then
> tst_res TFAIL $LTPTMP/tst_ip.err \
> @@ -365,7 +365,7 @@ test04()
> return $RC
> else
> diff -iwB $LTPTMP/tst_ip.out $LTPTMP/tst_ip.exp \
> - &>$LTPTMP/tst_ip.err || RC=$?
> + >$LTPTMP/tst_ip.err 2>&1 || RC=$?
> if [ $RC -ne 0 ]
> then
> tst_res FAIL $LTPTMP/tst_ip.err \
> @@ -377,14 +377,14 @@ test04()
> tst_resm TINFO \
> "Test #4: ip neigh del - deletes neighbour from the arp table."
>
> - ip neigh del 127.0.0.1 dev lo &>$LTPTMP/tst_ip.err || RC=$?
> + ip neigh del 127.0.0.1 dev lo >$LTPTMP/tst_ip.err 2>&1 || RC=$?
> if [ $RC -ne 0 ]
> then
> tst_res TFAIL $LTPTMP/tst_ip.err \
> "Test #4: ip neigh del command failed return =
> $RC. Reason: "
> return $RC
> else
> - ip neigh show | grep 127.0.0.1 grep -v "nud failed$"
> &>$LTPTMP/tst_ip.err || RC=$?
> + ip neigh show | grep 127.0.0.1 grep -v "nud failed$"
> >$LTPTMP/tst_ip.err 2>&1 || RC=$?
> if [ $RC -eq 0 ]
> then
> tst_res TFAIL $LTPTMP/tst_ip.err \
> @@ -426,7 +426,7 @@ test05()
> tst_resm TINFO \
> "Test #5: create an interface with inet 10.6.6.6 alias to eth0"
>
> - ifconfig eth0:1 10.6.6.6 netmask 255.255.255.0 &>$LTPTMP/tst_ip.err ||
> RC=$?
> + ifconfig eth0:1 10.6.6.6 netmask 255.255.255.0 >$LTPTMP/tst_ip.err 2>&1
> || RC=$?
> if [ $RC -ne 0 ]
> then
> tst_brk TBROK $LTPTMP/tst_ip.err NULL \
> @@ -434,7 +434,7 @@ test05()
> return $RC
> fi
>
> - ip route add 10.6.6.6 via 127.0.0.1 &>$LTPTMP/tst_ip.err || RC=$?
> + ip route add 10.6.6.6 via 127.0.0.1 >$LTPTMP/tst_ip.err 2>&1 || RC=$?
> if [ $RC -ne 0 ]
> then
> tst_res TFAIL $LTPTMP/tst_ip.err \
> @@ -449,7 +449,7 @@ test05()
> 10.6.6.6 via 127.0.0.1 dev lo
> EOF
>
> - ip route show | head -n1 &>$LTPTMP/tst_ip.out || RC=$?
> + ip route show | head -n1 >$LTPTMP/tst_ip.out 2>&1 || RC=$?
> if [ $RC -ne 0 ]
> then
> tst_res TFAIL $LTPTMP/tst_ip.err \
> @@ -457,7 +457,7 @@ test05()
> return $RC
> else
> diff -iwB $LTPTMP/tst_ip.out $LTPTMP/tst_ip.exp \
> - &>$LTPTMP/tst_ip.err || RC=$?
> + >$LTPTMP/tst_ip.err 2>&1 || RC=$?
> if [ $RC -ne 0 ]
> then
> tst_res FAIL $LTPTMP/tst_ip.err \
> @@ -469,14 +469,14 @@ test05()
> tst_resm TINFO \
> "Test #5: ip route del - deletes route from the route table."
>
> - ip route del 10.6.6.6 via 127.0.0.1 &>$LTPTMP/tst_ip.err ||
> RC=$?
> + ip route del 10.6.6.6 via 127.0.0.1 >$LTPTMP/tst_ip.err 2>&1 ||
> RC=$?
> if [ $RC -ne 0 ]
> then
> tst_res TFAIL $LTPTMP/tst_ip.err \
> "Test #5: ip route del command failed return =
> $RC. Reason: "
> return $RC
> else
> - ip route show | grep 127.0.0.1 &>$LTPTMP/tst_ip.err ||
> RC=$?
> + ip route show | grep 127.0.0.1 >$LTPTMP/tst_ip.err 2>&1
> || RC=$?
> if [ $RC -eq 0 ]
> then
> tst_res TFAIL $LTPTMP/tst_ip.err \
> @@ -514,7 +514,7 @@ test06()
> tst_resm TINFO \
> "Test #6: ip maddr add - adds a new multicast addr"
>
> - ifconfig eth0:1 10.6.6.6 netmask 255.255.255.0 &>$LTPTMP/tst_ip.err ||
> RC=$?
> + ifconfig eth0:1 10.6.6.6 netmask 255.255.255.0 >$LTPTMP/tst_ip.err 2>&1
> || RC=$?
> if [ $RC -ne 0 ]
> then
> tst_brk TBROK $LTPTMP/tst_ip.err NULL \
> @@ -522,7 +522,7 @@ test06()
> return $RC
> fi
>
> - ip maddr add 66:66:00:00:00:66 dev eth0:1 &>$LTPTMP/tst_ip.err || RC=$?
> + ip maddr add 66:66:00:00:00:66 dev eth0:1 >$LTPTMP/tst_ip.err 2>&1 ||
> RC=$?
> if [ $RC -ne 0 ]
> then
> tst_res TFAIL $LTPTMP/tst_ip.err \
> @@ -536,7 +536,7 @@ test06()
> link 66:66:00:00:00:66 static
> EOF
>
> - ip maddr show | grep "66:66:00:00:00:66" &>$LTPTMP/tst_ip.out
> || RC=$?
> + ip maddr show | grep "66:66:00:00:00:66" >$LTPTMP/tst_ip.out
> 2>&1 || RC=$?
> if [ $RC -ne 0 ]
> then
> tst_res TFAIL $LTPTMP/tst_ip.err \
> @@ -556,7 +556,7 @@ test06()
> tst_resm TINFO \
> "Test #6: ip maddr del - deletes multicast addr."
>
> - ip maddr del 66:66:00:00:00:66 dev eth0:1 &>$LTPTMP/tst_ip.err
> || RC=$?
> + ip maddr del 66:66:00:00:00:66 dev eth0:1 >$LTPTMP/tst_ip.err
> 2>&1 || RC=$?
> if [ $RC -ne 0 ]
> then
> tst_res TFAIL $LTPTMP/tst_ip.err \
> diff --git a/testcases/network/nfs/nfs03/nfs03
> b/testcases/network/nfs/nfs03/nfs03
> index 8cbd3a4..bbc79e9 100755
> --- a/testcases/network/nfs/nfs03/nfs03
> +++ b/testcases/network/nfs/nfs03/nfs03
> @@ -91,10 +91,10 @@ fs_inod()
> #
> # RETURNS: None.
>
> #=============================================================================
> -function err_log
> +err_log()
> {
> error "$1"
> - let step_errors="$step_errors + 1"
> + : $(($step_errors+=1))
> }
>
>
> @@ -107,7 +107,7 @@ function err_log
> #
> # RETURNS: None.
>
> #=============================================================================
> -function make_subdirs
> +make_subdirs()
> {
> i=0;
> while [ "$i" -lt "$numsubdirs" ]; do
> @@ -115,7 +115,7 @@ function make_subdirs
> echo "$0: mkdir dir$i"
> mkdir -p dir$i || echo "mkdir dir$i FAILED"
> }
> - let i="$i + 1"
> + : $(( i += 1 ))
> done;
> }
>
> @@ -129,7 +129,7 @@ function make_subdirs
> #
> # RETURNS: None.
>
> #=============================================================================
> -function touch_files
> +touch_files()
> {
> echo "$0: touch files [0-$numsubdirs]/file$numsubdirs[0-$numfiles]"
> j=0;
> @@ -140,10 +140,10 @@ function touch_files
>
> while [ "$k" -lt "$numfiles" ]; do
> >file$j$k || err_log ">file$j$k FAILED"
> - let k="$k + 1"
> + : $(( k += 1 ))
> done
>
> - let j="$j + 1"
> + : $(( j += 1 ))
> cd ..
> done
> }
> @@ -158,7 +158,7 @@ function touch_files
> #
> # RETURNS: None.
>
> #=============================================================================
> -function rm_files
> +rm_files()
> {
> echo "$0: rm files [0-$numsubdirs]/file$numsubdirs[0-$numfiles]"
> j=0;
> @@ -169,10 +169,10 @@ function rm_files
>
> while [ "$k" -lt "$numfiles" ]; do
> rm -f file$j$k || err_log "rm -f file$j$k FAILED"
> - let k="$k + 1"
> + : $(( k += 1 ))
> done
>
> - let j="$j + 1"
> + : $(( j += 1 ))
> cd ..
> done
> }
> @@ -187,7 +187,7 @@ function rm_files
> #
> # RETURNS: None.
>
> #=============================================================================
> -function step1
> +step1()
> {
> echo "=============================================="
> echo "MULTIPLE PROCESSES CREATING AND DELETING FILES"
> @@ -240,7 +240,7 @@ function step1
> rm_files &
> pid2=$!
>
> - let i="$i + 1"
> + : $(( i += 1 ))
> done
>
> # wait for all background processes to complete execution
> @@ -376,7 +376,7 @@ $trace_logic
> echo "fs_inod starting on $TCtmp."
> fs_inod $TCtmp $DIR_NUM $FILE_NUM 1
> retval=$?
> - echo $"fs_inod on $TCtmp finished."
> + echo "fs_inod on $TCtmp finished."
>
> if [ "$retval" != 0 ]; then
> end_testcase "Errors have resulted from this test: fs_inod returned
> $retval."
>
------------------------------------------------------------------------------
Enter the BlackBerry Developer Challenge
This is your chance to win up to $100,000 in prizes! For a limited time,
vendors submitting new applications to BlackBerry App World(TM) will have
the opportunity to enter the BlackBerry Developer Challenge. See full prize
details at: http://p.sf.net/sfu/blackberry
_______________________________________________
Ltp-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ltp-list
