Here is another patch, which just fixes the code format in mtest01.c.
This patch should be applied after previous patch applied.
Thanks,
Caspar
From 9ba8783301dad1bef3aa3a929d4441c964802514 Mon Sep 17 00:00:00 2001
From: Caspar Zhang <[email protected]>
Date: Wed, 5 Jan 2011 21:09:25 +0800
Subject: [PATCH 2/2] fix mtest01 code format
Signed-off-by: Caspar Zhang <[email protected]>
---
testcases/kernel/mem/mtest01/mtest01.c | 400 ++++++++++++++++----------------
1 files changed, 199 insertions(+), 201 deletions(-)
diff --git a/testcases/kernel/mem/mtest01/mtest01.c
b/testcases/kernel/mem/mtest01/mtest01.c
index 2ea921e..00a06ae 100644
--- a/testcases/kernel/mem/mtest01/mtest01.c
+++ b/testcases/kernel/mem/mtest01/mtest01.c
@@ -50,229 +50,227 @@
char *TCID = "mtest01";
int TST_TOTAL = 1;
-
int pid_count = 0;
void handler(int signo)
{
- pid_count++;
+ pid_count++;
}
-int main(int argc, char* argv[]) {
- char* mem;
- float percent;
- unsigned int maxpercent=0, dowrite=0, verbose=0, j, c;
- unsigned long bytecount, alloc_bytes, max_pids;
- unsigned long long original_maxbytes,maxbytes=0;
- unsigned long long pre_mem, post_mem;
- unsigned long long total_ram, total_free, D, C;
- extern char* optarg;
- int chunksize = 1024*1024; /* one meg at a time by default */
- struct sysinfo sstats;
- int i,pid_cntr;
- pid_t pid,*pid_list;
- struct sigaction act;
-
- act.sa_handler = handler;
- act.sa_flags = 0;
- sigemptyset(&act.sa_mask);
- sigaction(SIGRTMIN, &act, 0);
+int main(int argc, char* argv[])
+{
+ char* mem;
+ float percent;
+ unsigned int maxpercent = 0, dowrite = 0, verbose=0, j, c;
+ unsigned long bytecount, alloc_bytes, max_pids;
+ unsigned long long original_maxbytes, maxbytes = 0;
+ unsigned long long pre_mem, post_mem;
+ unsigned long long total_ram, total_free, D, C;
+ extern char* optarg;
+ int chunksize = 1024*1024; /* one meg at a time by default */
+ struct sysinfo sstats;
+ int i, pid_cntr;
+ pid_t pid, *pid_list;
+ struct sigaction act;
- while ((c=getopt(argc, argv, "c:b:p:wvh")) != EOF) {
- switch((char)c) {
- case 'c':
- chunksize = atoi(optarg);
- break;
- case 'b':
- maxbytes = atoll(optarg);
- if (maxpercent != 0) {
- tst_resm(TFAIL, "ERROR: -b option cannot be used with -p option at
the same time");
- exit(1);
- }
- break;
- case 'p':
- maxpercent = atoi(optarg);
- if (maxbytes != 0) {
- tst_resm(TFAIL, "ERROR: -p option cannot be used with -b option at
the same time");
- exit(1);
+ act.sa_handler = handler;
+ act.sa_flags = 0;
+ sigemptyset(&act.sa_mask);
+ sigaction(SIGRTMIN, &act, 0);
+
+ while ((c = getopt(argc, argv, "c:b:p:wvh")) != EOF)
+ {
+ switch((char)c)
+ {
+ case 'c':
+ chunksize = atoi(optarg);
+ break;
+ case 'b':
+ if (maxpercent != 0)
+ tst_brkm(TFAIL, NULL, "ERROR: -b option cannot be used
with -p option at the same time");
+ maxbytes = atoll(optarg);
+ break;
+ case 'p':
+ if (maxbytes != 0)
+ tst_brkm(TFAIL, NULL, "ERROR: -p option cannot be used
with -b option at the same time");
+ maxpercent = atoi(optarg);
+ if (maxpercent <= 0)
+ tst_brkm(TFAIL, NULL, "ERROR: -p option requires number
greater than 0");
+ if (maxpercent > 99)
+ tst_brkm(TFAIL, NULL, "ERROR: -p option cannot be greater
than 99");
+ break;
+ case 'w':
+ dowrite = 1;
+ break;
+ case 'v':
+ verbose = 1;
+ break;
+ case 'h':
+ default:
+ printf("Usage: %s [-c <bytes>] [-b <bytes>|-p <percent>]
[-v]\n", argv[0]);
+ printf("\t-c <num>\tsize of chunk in bytes to malloc on each
pass\n");
+ printf("\t-b <bytes>\tmaximum number of bytes to allocate
before stopping\n");
+ printf("\t-p <bytes>\tpercent of total memory used at which
the program stops\n");
+ printf("\t-w\t\twrite to the memory after allocating\n");
+ printf("\t-v\t\tverbose\n");
+ printf("\t-h\t\tdisplay usage\n");
+ exit(-1);
}
- if (maxpercent <= 0) {
- tst_resm(TFAIL, "ERROR: -p option requires number greater than 0");
- exit(1);}
- if (maxpercent > 99) {
- tst_resm(TFAIL, "ERROR: -p option cannot be greater than 99");
- exit(1);}
- break;
- case 'w':
- dowrite = 1;
- break;
- case 'v':
- verbose = 1;
- break;
- case 'h':
- default:
- printf("Usage: %s [-c <bytes>] [-b <bytes>|-p <percent>] [-v]\n",
argv[0]);
- printf("\t-c <num>\tsize of chunk in bytes to malloc on each pass\n");
- printf("\t-b <bytes>\tmaximum number of bytes to allocate before
stopping\n");
- printf("\t-p <bytes>\tpercent of total memory used at which the
program stops\n");
- printf("\t-w\t\twrite to the memory after allocating\n");
- printf("\t-v\t\tverbose\n");
- printf("\t-h\t\tdisplay usage\n");
- exit(-1);
}
- }
-
- sysinfo(&sstats);
- total_ram = sstats.totalram + sstats.totalswap;
- total_free = sstats.freeram + sstats.freeswap;
- /* Total Free Pre-Test RAM */
- pre_mem = sstats.mem_unit*total_free;
-
- max_pids = total_ram / FIVE_HUNDRED_KB + 1;
-
- if ((pid_list = malloc(max_pids * sizeof(pid_t))) == NULL)
- {
- tst_resm(TBROK|TERRNO, "malloc");
- exit(1);
- }
- memset(pid_list, 0, max_pids * sizeof(pid_t));
-
- /* Currently used memory */
- C = sstats.mem_unit*(total_ram-total_free);
- tst_resm(TINFO, "Total memory already used on system = %llu kbytes", C/1024);
-
- if (maxpercent) {
- percent=(float)maxpercent/100.00;
-
- /* Desired memory needed to reach maxpercent */
- D = percent*(sstats.mem_unit*total_ram);
- tst_resm(TINFO, "Total memory used needed to reach maxpercent = %llu
kbytes", D/1024);
+
+ sysinfo(&sstats);
+ total_ram = sstats.totalram + sstats.totalswap;
+ total_free = sstats.freeram + sstats.freeswap;
+ /* Total Free Pre-Test RAM */
+ pre_mem = sstats.mem_unit * total_free;
+ max_pids = total_ram / (unsigned long)FIVE_HUNDRED_KB + 1;
+
+ if ((pid_list = malloc(max_pids * sizeof(pid_t))) == NULL)
+ tst_brkm(TBROK|TERRNO, NULL, "malloc");
+ memset(pid_list, 0, max_pids * sizeof(pid_t));
+
+ /* Currently used memory */
+ C = sstats.mem_unit * (total_ram - total_free);
+ tst_resm(TINFO, "Total memory already used on system = %llu kbytes",
C/1024);
+
+ if (maxpercent)
+ {
+ percent = (float)maxpercent / 100.00;
- /* Are we already using more than maxpercent? */
- if (C>D) {
- tst_resm(TFAIL, "More memory than the maximum amount you specified is
already being used");
- free(pid_list);
- exit(1);
+ /* Desired memory needed to reach maxpercent */
+ D = percent * (sstats.mem_unit * total_ram);
+ tst_resm(TINFO, "Total memory used needed to reach maxpercent = %llu
kbytes", D/1024);
+
+ /* Are we already using more than maxpercent? */
+ if (C > D)
+ {
+ tst_resm(TFAIL, "More memory than the maximum amount you specified
is already being used");
+ free(pid_list);
+ exit(1);
+ }
+
+ /* set maxbytes to the extra amount we want to allocate */
+ maxbytes = D - C;
+ tst_resm(TINFO, "Filling up %d%% of ram which is %llu kbytes",
maxpercent, maxbytes/1024);
}
-
- /* set maxbytes to the extra amount we want to allocate */
- maxbytes = D-C;
- tst_resm(TINFO, "Filling up %d%% of ram which is %llu kbytes", maxpercent,
maxbytes/1024);
- }
- original_maxbytes=maxbytes;
- i=0;
- pid_cntr=0;
- pid=fork();
- if (pid != 0)
- pid_cntr++;
- pid_list[i]=pid;
+ original_maxbytes = maxbytes;
+ i = 0;
+ pid_cntr = 0;
+ pid = fork();
+ if (pid != 0)
+ pid_cntr++;
+ pid_list[i] = pid;
#if defined (_s390_) /* s390's 31bit addressing requires smaller chunks */
- while (pid != 0 && maxbytes > FIVE_HUNDRED_KB)
- {
- i++;
- maxbytes -= FIVE_HUNDRED_KB;
- pid = fork();
- if (pid != 0) {
- pid_cntr++;
- pid_list[i] = pid;
+ while (pid != 0 && maxbytes > FIVE_HUNDRED_KB)
+ {
+ i++;
+ maxbytes -= FIVE_HUNDRED_KB;
+ pid = fork();
+ if (pid != 0)
+ {
+ pid_cntr++;
+ pid_list[i] = pid;
+ }
}
- }
- if (maxbytes > FIVE_HUNDRED_KB)
- alloc_bytes FIVE_HUNDRED_KB;
- else
- alloc_bytes = (unsigned long) maxbytes;
-
+ if (maxbytes > FIVE_HUNDRED_KB)
+ alloc_bytes = FIVE_HUNDRED_KB;
+ else
+ alloc_bytes = (unsigned long) maxbytes;
+
#elif __WORDSIZE==32
- while (pid != 0 && maxbytes > ONE_MEGABYTE)
- {
- i++;
- maxbytes -= ONE_MEGABYTE;
- pid = fork();
- if (pid != 0) {
- pid_cntr++;
- pid_list[i]=pid;
+ while (pid != 0 && maxbytes > ONE_MEGABYTE)
+ {
+ i++;
+ maxbytes -= ONE_MEGABYTE;
+ pid = fork();
+ if (pid != 0)
+ {
+ pid_cntr++;
+ pid_list[i]=pid;
+ }
}
- }
- if (maxbytes > ONE_MEGABYTE)
- alloc_bytes = ONE_MEGABYTE;
- else
- alloc_bytes = (unsigned long)maxbytes;
-
+ if (maxbytes > ONE_MEGABYTE)
+ alloc_bytes = ONE_MEGABYTE;
+ else
+ alloc_bytes = (unsigned long)maxbytes;
+
#elif __WORDSIZE==64
- while (pid!=0 && maxbytes > THREE_MEGABYTES)
- {
- i++;
- maxbytes -= THREE_MEGABYTES;
- pid=fork();
- if (pid != 0) {
- pid_cntr++;
- pid_list[i] = pid;
- }
- }
- if (maxbytes > THREE_MEGABYTES)
- alloc_bytes = THREE_MEGABYTES;
- else
- alloc_bytes = maxbytes;
-#endif
-
- if (pid == 0) /** CHILD **/
- {
- bytecount=chunksize;
- while (1) {
- if ((mem = (char*)malloc(chunksize)) == NULL) {
- tst_resm(TINFO, "stopped at %lu bytes", bytecount);
- free(pid_list);
- exit(1);
- }
- if (dowrite)
- for (j=0; j<chunksize; j++)
- *(mem+j)='a';
- if (verbose)
- tst_resm(TINFO, "allocated %lu bytes chunksize is %d", bytecount,
chunksize);
- bytecount+=chunksize;
- if (alloc_bytes && (bytecount >= alloc_bytes))
- break;
+ while (pid!=0 && maxbytes > THREE_MEGABYTES)
+ {
+ i++;
+ maxbytes -= THREE_MEGABYTES;
+ pid = fork();
+ if (pid != 0)
+ {
+ pid_cntr++;
+ pid_list[i] = pid;
+ }
}
- if (dowrite)
- tst_resm(TINFO, "... %lu bytes allocated and used.", bytecount);
+ if (maxbytes > THREE_MEGABYTES)
+ alloc_bytes = THREE_MEGABYTES;
else
- tst_resm(TINFO, "... %lu bytes allocated only.", bytecount);
- kill(getppid(),SIGRTMIN);
- while (1)
- sleep(1);
- }
- else /** PARENT **/
- {
-
- i=0;
- sysinfo(&sstats);
+ alloc_bytes = maxbytes;
+#endif
- if (dowrite)
+ if (pid == 0) /** CHILD **/
{
- /* Total Free Post-Test RAM */
- post_mem = (unsigned long long)sstats.mem_unit*sstats.freeram;
- post_mem = post_mem+((unsigned long
long)sstats.mem_unit*sstats.freeswap);
-
- while ((((unsigned long long)pre_mem - post_mem) < (unsigned long
long)original_maxbytes) &&
- (pid_count < pid_cntr) )
- {
- sleep(1);
- sysinfo(&sstats);
- post_mem = (unsigned long long)sstats.mem_unit*sstats.freeram;
- post_mem = post_mem+((unsigned long
long)sstats.mem_unit*sstats.freeswap);
- }
+ bytecount = chunksize;
+ while (1)
+ {
+ if ((mem = malloc(chunksize)) == NULL)
+ {
+ tst_resm(TBROK|TERRNO, "stopped at %lu bytes", bytecount);
+ free(pid_list);
+ exit(1);
+ }
+ if (dowrite)
+ for (j = 0; j < chunksize; j++)
+ *(mem+j) = 'a';
+ if (verbose)
+ tst_resm(TINFO, "allocated %lu bytes chunksize is %d",
bytecount, chunksize);
+ bytecount += chunksize;
+ if (alloc_bytes && bytecount >= alloc_bytes)
+ break;
+ }
+ if (dowrite)
+ tst_resm(TINFO, "... %lu bytes allocated and used.", bytecount);
+ else
+ tst_resm(TINFO, "... %lu bytes allocated only.", bytecount);
+ kill(getppid(), SIGRTMIN);
+ while (1)
+ sleep(1);
}
- while (pid_list[i]!=0)
+ else /** PARENT **/
{
- kill(pid_list[i],SIGKILL);
- i++;
+ i = 0;
+ sysinfo(&sstats);
+
+ if (dowrite)
+ {
+ /* Total Free Post-Test RAM */
+ post_mem = (unsigned long long)sstats.mem_unit * sstats.freeram;
+ post_mem = post_mem + (unsigned long long)sstats.mem_unit *
sstats.freeswap;
+
+ while ((((unsigned long long)pre_mem - post_mem) < (unsigned long
long)original_maxbytes) &&
+ (pid_count < pid_cntr))
+ {
+ sleep(1);
+ sysinfo(&sstats);
+ post_mem = (unsigned long long)sstats.mem_unit *
sstats.freeram;
+ post_mem = post_mem + (unsigned long long)sstats.mem_unit *
sstats.freeswap;
+ }
+ }
+ while (pid_list[i] != 0)
+ {
+ kill(pid_list[i], SIGKILL);
+ i++;
+ }
+ if (dowrite)
+ tst_resm(TPASS, "%llu kbytes allocated and used.",
original_maxbytes/1024);
+ else
+ tst_resm(TPASS, "%llu kbytes allocated only.",
original_maxbytes/1024);
}
- if (dowrite)
- tst_resm(TPASS, "%llu kbytes allocated and used.",
original_maxbytes/1024);
- else
- tst_resm(TPASS, "%llu kbytes allocated only.", original_maxbytes/1024);
- }
- free(pid_list);
- exit(0);
+ free(pid_list);
+ exit(0);
}
--
1.7.3.4
------------------------------------------------------------------------------
Learn how Oracle Real Application Clusters (RAC) One Node allows customers
to consolidate database storage, standardize their database environment, and,
should the need arise, upgrade to a full multi-node Oracle RAC database
without downtime or disruption
http://p.sf.net/sfu/oracle-sfdevnl
_______________________________________________
Ltp-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ltp-list
