Hi All ,

 

Description of problem:

 

I am getting error while running   if4-mtu-change and if6-updown  network 
stress interfaces test case  from LTP version  20120903 (ltp-full-20120903.tar) 
i.e.  on Linux 3.2 kernel. Below are the outputs for error.

 

 

The Network stress interfaces part of the LTP stress fails.

 

network_stress.interface:if4-mtu-change                 FAIL       2    

network_stress.interface:if6-updown                     FAIL       2  


 

Below are the cause for failing above mentioned testcase:

 

if4-mtu-change01    0  TINFO  :  Verify the IPv4 connectivity is not broken 
when ifconfig command changes MTU 128 times every 5 seconds

if4-mtu-change01    1  TFAIL  :  eth1 is broken.

if4-mtu-change02    0  TINFO  :  Verify the IPv4 connectivity is not broken 
when ip command changes MTU 128 times every 5 seconds

if4-mtu-change02    2  TBROK  :  Test Link 0 is somthing wrong.

 

if6-updown    1  TBROK  :  Link-local address is not found at eth1 on the 
remote host

 

Suggested Code changes:

 

To  resolve above mentioned  error  by making  changes in  
ltp-full-20120903/testcases/network/stress/interface/if4-mtu-change  and  
ltp-full-20120903/testcases/network/stress/interface/if6-updown 
b/ltp-full-20120903/testcases/network/stress/interface/if6-updown  file. Below 
are the code changes:

 

 

diff -Nurp 
a/ltp-full-20120903/testcases/network/stress/interface/if4-mtu-change 
b/ltp-full-20120903/testcases/network/stress/interface/if4-mtu-change

--- a/ltp-full-20120903/testcases/network/stress/interface/if4-mtu-change       
2013-01-09 02:07:21.000000000 -0700

+++ b/ltp-full-20120903/testcases/network/stress/interface/if4-mtu-change       
2013-02-01 05:09:51.000000000 -0700

@@ -190,6 +190,7 @@ test_body()

 

     # Check the connctivity

     check_icmpv4_connectivity $lhost_ifname $rhost_ipv4addr

+    sleep 5

     if [ $? -ne 0 ]; then

        tst_resm TBROK "Test Link $LINK_NUM is somthing wrong."

        return 1

@@ -237,6 +238,7 @@ test_body()

 

     # Check the connectivity again

     check_icmpv4_connectivity $lhost_ifname $rhost_ipv4addr

+    sleep 5

     if [ $? -ne 0 ]; then

        tst_resm TFAIL "$lhost_ifname is broken."

        return 1

diff -Nurp a/ltp-full-20120903/testcases/network/stress/interface/if6-updown 
b/ltp-full-20120903/testcases/network/stress/interface/if6-updown

--- a/ltp-full-20120903/testcases/network/stress/interface/if6-updown   
2013-01-09 02:07:21.000000000 -0700

+++ b/ltp-full-20120903/testcases/network/stress/interface/if6-updown   
2013-02-01 05:12:40.000000000 -0700

@@ -93,7 +93,7 @@ do_setup()

     # Initialize the interfaces

     initialize_if lhost ${LINK_NUM}

     initialize_if rhost ${LINK_NUM}

-

+    sleep 5

     # Get the Interface name of local host

     lhost_ifname=`get_ifname lhost ${LINK_NUM}`

     if [ $? -ne 0 ]; then

 

After the mentioned changes I got output 

 

<<<test_output>>>

/opt/ltp/testcases/bin/bg_tcp_traffic: line 269: $2: unbound variable

if4-mtu-change01    0  TINFO  :  Verify the IPv4 connectivity is not broken 
when ifconfig command changes MTU 128 times every 5 seconds

/opt/ltp/testcases/bin/bg_tcp_traffic: line 269: $2: unbound variable

if4-mtu-change01    1  TPASS  :  Test is finished correctly.

if4-mtu-change02    0  TINFO  :  Verify the IPv4 connectivity is not broken 
when ip command changes MTU 128 times every 5 seconds

if4-mtu-change02    2  TPASS  :  Test is finished correctly.

<<<execution_status>>>

tag=if6-updown stime=1359722982

cmdline=" if6-updown"

contacts=""

analysis=exit

<<<test_output>>>

if6-updown01    0  TINFO  :  Verify the IPv6 connectivity is not broken when 
the ifconfig command ups, then downs an interface 128 times

if6-updown01    1  TPASS  :  Test is finished successfully.

if6-updown02    0  TINFO  :  Verify the IPv6 connectivity is not broken when 
the ip command ups, then downs an interface 128 times

if6-updown02    2  TPASS  :  Test is finished successfully.

incrementing stop

<<<execution_status>>>

initiation_status="ok"

duration=1449 termination_type=exited termination_id=0 corefile=no

cutime=103 cstime=456

<<<test_end>>>

 

Could you please let me know that above code changes are valid or not ? Please 
suggest me if there are any other solutions to resolve above error.

Any help would be appreciated !!!!

 

Thanks,

Bhushan 

 
 

Information transmitted by this e-mail is proprietary to MphasiS, its 
associated companies and/ or its customers and is intended 
for use only by the individual or entity to which it is addressed, and may 
contain information that is privileged, confidential or 
exempt from disclosure under applicable law. If you are not the intended 
recipient or it appears that this mail has been forwarded 
to you without proper authority, you are notified that any use or dissemination 
of this information in any manner is strictly 
prohibited. In such cases, please notify us immediately at 
[email protected] and delete this mail from your records.
------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_d2d_jan
_______________________________________________
Ltp-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ltp-list

Reply via email to