Daniel and Jim: I follow the suggestion that was come from you. Now, in moment of start x with param X_MODE_0 = 800x600, screen appear black, but don't show errors, only stay black. Same with 640x480. This problem happen when work with cards Tident 9680/1Mb and Cirrus 5436/1Mb. I try too with SIS 6326/8Mb and it work very fine in 640x480, 800x600 and 1024x768, but I need to get that Trident (or the Cirrus Card, this last is ideal) work in 800x600. Any additional suggestion?. Thank to all.
Guille Daniel Ramaley Wrote I was having some of these same problems earlier today. The help given to me was to try "X_MODE_0 = 800x600". It worked for me. Jim McQuillan wrote: > Guillermo, > > The X_MODE_800x600 setting isn't used by ltsp 2.09. > > The new entry you need is: > > X_MODE_0 = 800x600 > > That will just set the resolution. > > If you want to also supply a complete modeline, you can use > the same entry, but append the modeline on the end of it. > > That is, you could use: > > X_MODE_0 = 800x600 36 800 824 896 1024 600 601 603 625 > > You can also specify X_MODE_1 and X_MODE_2 for additional > resolution/modelines. > > This new entry allows easy specification of the resolution, when you > don't want > to specify a complete modeline. > > Jim McQuillan > [EMAIL PROTECTED] > > [EMAIL PROTECTED] wrote: > > >Hi everybuddy: > >I'm working with ltsp 2.09pre3 and I want setup my video resolution in > >800x600. > >I try edit, in workstation tab ws001 of lts.conf, the X_MODE_800x600 > >value: > > > >X_MODE_800X600 = "36 800 824 896 1024 600 601 603 625" > > > >This configuration with Cirrus card start X in 640x480 and with Trident > >card appear in very lower resolution (same if comment this line in > >lts.conf). > > > >Too I try use others values and until use XF86Config_File, but obtain > >some bad results. > >My monitor is an IBM 2238 that together to my video cards works fine in > >windows. > > > >In 2.07 & 2.08 version I have same problems. > >According to calculation with both card and this monitor should work > >fine in 800x600x16bit with 1 MB of video RAM: > > > >(800*600*16)/8 = 960KB > > > >In fact, when I use this card and monitor with full local linux > >installation, this config is valid and functional. > > > >Somebody can helpme with this trouble?? > > > >Thanks very much in advance for all. > > > >Guille > > > >
begin:vcard n:Acosta;Guillermo tel;cell:+595 981 466 533 tel;fax:+595 21 601 523 tel;work:+595 21 612 346/7 x-mozilla-html:FALSE url:www.nexus.com.py org:NEXUS;Depto. de Ingenier�a de Redes adr:;;Guido Spano 1658 c/ San Martin ;Asunci�n;Depto. Central;;Paraguay version:2.1 email;internet:[EMAIL PROTECTED] x-mozilla-cpt:;-7520 fn:Guillermo Acosta end:vcard
