Have you tried running multiple workstations with sound concurrently? I tried with 1b and ltsp 2.08 but was only able to run sound on one workstation.
> Greetings everyone, > > Never mind my previous post. I realized what I did wrong but it took going > to the Linux console and figuring it out. I need to initialize the SB16 > with the following lines: > > insmod ${SMODULE_DIR}/2.4.9-ltsp-1/kernel/drivers/sound/soundcore.o > insmod ${SMODULE_DIR}/2.4.9-ltsp-1/kernel/drivers/sound/sound.o > insmod ${SMODULE_DIR}/2.4.9-ltsp-1/kernel/drivers/sound/uart401.o > insmod ${SMODULE_DIR}/2.4.9-ltsp-1/kernel/drivers/sound/sb_lib.o > insmod ${SMODULE_DIR}/2.4.9-ltsp-1/kernel/drivers/sound/sb.o io=0x220 irq=5 > dma=1 dma16=5 mpu_io=0x330 > insmod ${SMODULE_DIR}/2.4.9-ltsp-1/kernel/drivers/sound/opl3.o io=0x388 > > Because the sound blaster 16 uses DMA channel 1 and 5 you can't use the > normal sound blaster line to initialize it. Note the extra dma16=5 line. > Also, you need the mpu_io=0x330 which the original rc.sound script doesn't > have. In addition you need the opl3.o driver (MIDI driver) if you want > MIDI support. > > So now I can run auplay myfile.wav and hear it! That rocks! > > -----Original Message----- > From: Hans Petrie [mailto:[EMAIL PROTECTED]] > Sent: Friday, November 09, 2001 8:45 AM > To: [EMAIL PROTECTED] > Subject: [Ltsp-discuss] 2.09pre4 Sound Blaster 16. Anybody get this to > work? > > > Greetings everyone, > > Has anyone had any luck getting the Sound Blaster 16 to work with ltspsound > 0.1c? I just want to know if it is possible. The drivers appear to > recognize the card and auinfo works great. But when I do: > > auplay myfile.wav > > It says I have an IRQ conflict. I have tested the card by plugging it into > the Linux console and it works great. Maybe I need to load more drivers. > When you do an lsmod what drivers do you have loaded? I have: > > soundcore > sound > uart401 > sb_lib > sb > > Do I need more drivers? Will the nasd (network audio system daemon) let me > play sound from the native linux multimedia clients or do I have to use > auplay? I'm I using auplay correctly? I assume that it supports the .wav > format? Has anybody found any documentation on this besides that included > with the ltspsound package (the README's , etc.) > > If anyone is working on trying to get this to work and hasn't had any luck > I would like to exchange notes. Maybe we can figure it out. > > Thanks in advance. > > -----Original Message----- > From: Venkat Manakkal [mailto:[EMAIL PROTECTED]] > Sent: Thursday, November 08, 2001 10:17 AM > To: [EMAIL PROTECTED] > Subject: RE: [Ltsp-discuss] LTSP in NT environment > > > Hello, > > I am looking at doing just that - securing the workstation [server is > already ipchained]. Could you give details on running ipchains on the > workstation? We run with real IPs and each machine has to have is own > firewalling. > > Also, I understand that XDMCP logins transmit plain text passwords over the > network. Is this right? If so, this is a no-no. I plan on using a local xdm > (I'm working on this at the moment). Also, did anyone get ssh and sshd > running on the workstation? > > Best, > > ---Venkat. > > At 09:51 AM 11/8/2001 -0800, Dan Landry wrote: > >Ragner > > > >I have a similar environment up and running. Put a second nic in the ltsp > >server and ask your admin to give you a reserved DHCP address (that way > > you will always get the same ip). Install samba and determine the correct > > authentication method to use. Join the NT domain. > > > >I use ipchains/ipmask to firewall the ltsp workstations and provide nat > > for internet access. > > > >This has worked flawlessly for 8 months under very heavey use at apublic > >library branch. > > > >Dan Landry > > > > > -----Original Message----- > > > From: Ragnar Wisløff [mailto:[EMAIL PROTECTED]] > > > Sent: Thursday, November 08, 2001 5:08 AM > > > To: [EMAIL PROTECTED] > > > Subject: [Ltsp-discuss] LTSP in NT environment > > > > > > > > > I'm doing an install of a test with 10 clients and a > > > dedicated LTSP server at > > > our local school. The server needs to be included in the NT domain > > > environment that's in place (and the admin is none to keen on > > > "this Linux > > > stuff"). The PDC runs dhcp. What's the easiest way around > > > this - change the > > > dhcp set up on the NT box (can NT do a referral of the > > > kernels to transfer > > > from the LTSP server), or change to bootp? > > > > > > Thanks, > > > > > > -- > > > Ragnar Wisløff > > > ---------- > > > life is a reach. then you gybe > > > > > > _____________________________________________________________________ > > > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > > > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > > > For additional LTSP help, try #ltsp channel on irc.openprojects.net > > > >_____________________________________________________________________ > >Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > >For additional LTSP help, try #ltsp channel on irc.openprojects.net > > Venkat Manakkal > President, > Manakkal & Associates, Inc. > http://www.manakkal.com/ > Tel: 607-546-7300 Fax: 509-471-5693 Cell: 603-321-9870 > > > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net > > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net > > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net