Sir, * According to your suggestion it's working fine with XSEVER = cyrix display card...but...
* Front screen of the workstation blinking and modeline is not set to that workstation properly...how can i over come of this problem.. * When i choose XSERVER = XF86_SVGA then 640x480 is working fine...without any problem...but i need only 800x600 screen...800x600 is not working in XF86_SVGA.. * Help me... Regards, sherfudeen M -- "Don't think alone ever, god with u forever" M.Sherfudeen, Venbro Systems, Erode.
# # Config file for the Linux Terminal Server Project (www.ltsp.org) # [Default] LTSP_BASEDIR = /opt/ltsp SERVER = 192.168.0.12 XSERVER = auto X_MOUSE_PROTOCOL = "PS/2" X_MOUSE_DEVICE = "/dev/psaux" X_MOUSE_RESOLUTION = 400 X_MOUSE_BUTTONS = 3 USE_XFS = N LOCAL_APPS = N RUNLEVEL = 5 #------------------------------------------------------------------------------ # # Example of specifying X settings for a workstation # #[ws001] # XSERVER = sis # LOCAL_APPS = N # USE_NFS_SWAP = Y # SWAPFILE_SIZE = 48m # RUNLEVEL = 5 [ws003] XSERVER = cyrix X4_DRIVER = cyrix LOCAL_APPS = Y LOCAL_WM = Y USE_NFS_SWAP = Y SWAPFILE_SIZE = 64m X_MOUSE_PROTOCOL = "Microsoft" X_MOUSE_DEVICE = "/dev/ttyS0" X_MOUSE_RESOLUTION = 50 X_MOUSE_BUTTONS = 3 MODULE_01 = /kernel/drivers/char/serial.o X_COLOR_DEPTH = 8 X_MODE_0 = "800x600" RUNLEVEL = 5 [ws005] XSERVER = XF86_SVGA LOCAL_APPS = Y LOCAL_WM = Y USE_NFS_SWAP = Y SWAPFILE_SIZE = 64m X_HORIZSYNC = 31.5-48.5 X_VERTREFRESH = 50-100 X_MODE_800x600 = 36 800 824 896 1024 600 601 603 625 RUNLEVEL = 5 # # ws004 is my virtual workstation running in a VMware session # #[ws004] # DNS_SERVER = 192.168.57.97 # XSERVER = auto # X4_BUSID = "PCI:0:15:0" # X_MODE_0 = 800x600 # LOCAL_APPS = N # USE_NFS_SWAP = Y # SWAPFILE_SIZE = 64m # RUNLEVEL = 5 #------------------------------------------------------------------------------ # # Example of a workstation configured to load some modules # #[ws001] # MODULE_01 = agpgart.o # This is for i810 video # MODULE_02 = uart401.o # MODULE_03 = sb.o io=0x220 irq=5 dma=1 # MODULE_04 = opl3.o #------------------------------------------------------------------------------ # # Example of ws001 configured for local apps # #[ws001] # LOCAL_APPS = Y # LOCAL_WM = Y # NIS_DOMAIN = ltsp # NIS_SERVER = 192.168.0.254 #------------------------------------------------------------------------------ # # Example of a serial printer attached to /dev/ttyS1 on workstation ws001 # #[ws001] # PRINTER_0_DEVICE = /dev/ttyS1 # PRINTER_0_TYPE = S # P-Parallel, S-Serial # PRINTER_0_PORT = 9100 # tcp/ip port: defaults to 9100 # PRINTER_0_SPEED = 9600 # baud rate: defaults to 9600 # PRINTER_0_FLOWCTRL = S # Flow control: S-Software (XON/XOFF), # # H-Hardware (CTS/RTS) # PRINTER_0_PARITY = N # Parity: N-None, E-Even, O-Odd # # (defaults to 'N') # PRINTER_0_DATABITS = 8 # Databits: 5,6,7,8 (defaults to 8) #------------------------------------------------------------------------------ # # Example of setting the ramdisk size to something other than the # default of 1024k ( 1mb ). Make sure you also tag your kernel with # and specify the new ramdisk size. # #[ws001] # RAMDISK_SIZE = 8192 #