My ws couldn't run GDM, here's the error: === (--) Trident chipset version: 0x33 (TVGA8900CL/D) (--) SVGA: Revision 0. (--) SVGA: chipset: tvga8900cl (--) SVGA: videoram: 1024k (--) SVGA: clocks: 25.31 28.32 45.37 36.16 57.86 32.73 50.61 40.37 (--) SVGA: clocks: 88.44 98.90 107.50 107.41 72.34 77.61 80.79 75.95 (--) SVGA: Effective pixel clocks available: (--) SVGA: pixel clocks: 12.65 14.16 22.68 18.08 28.93 32.88 25.32 20.19 (--) SVGA: pixel clocks: 44.22 49.41 52.01 51.96 36.16 38.78 40.38 37.98
(**) SVGA: 16bpp not supported for this chipset *** A configured device found, but display modes could not be resolved. *** Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages INIT: Id "5" respawning too fast: disbled for 5 minutes === And here's my lts.conf for this ws: === [komputer_01] XSERVER = XF86_SVGA # XF86_W32 #XF86_VGA16 X_MOUSE_PROTOCOL = "IMPS/2" # "MouseManPlusPS/2" X_HORZSYNC = 31-62 X_VERTREFRESH = 55-90 X_MODE_800x600 = 36 800 824 896 1024 600 601 603 625 # +hsync +vsync MODULE_03 = sb.o io=0x220 irq=5 dma=1 === Is there any connection to "X_MODE_800x600"? Should i change the clocks (as the message said)? (if i should) How can i understand those effective clocks and change all the values to lts.conf? And how can i send the full server output when reporting a problem related to a server crash? Best Regards, Adinda _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net