Thanks I will try that out! Matthew S. Vesperman StarSoft Computer Systems http://www.sscompsys.com
----- Original Message ----- From: <[EMAIL PROTECTED]> To: "Matthew S. Vesperman" <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Thursday, March 07, 2002 08:08 pm Subject: Re: [Ltsp-discuss] VMWare > Hello Matthew, > > You need an Etherboot floppy bootable image. Go to > http://www.Rom-o-matic.net and generate one. I think > it was pcnet32 that I used. > > Once you get that image, store it in your vmware directory > and when you setup the vmware session, tell it you have > a floppy drive, but you need to say that it is a file, rather > than a device. > > You don't need to configure a hard drive under vmware. > Vmware will come up, boot the virtual computer, which will > then see the etherboot floppy image and it will boot. > > Then, you'll see what your MAC address is (it should display on > the screen as part of the Etherboot info). > Then, configure dhcpd.conf to serve an IP address and other > info to it. > > Then, you should be all set. > > Jim McQuillan > [EMAIL PROTECTED] > > > On Thu, 7 Mar 2002, Matthew S. Vesperman wrote: > > > How do I configure VMware 3.0 so I can use it as an LTSP diskless > > workstation? > > > > > > Matthew S. Vesperman > > StarSoft Computer Systems > > http://www.sscompsys.com > > > > > > > > _____________________________________________________________________ > > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > > For additional LTSP help, try #ltsp channel on irc.openprojects.net > > > > -- > > > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net > _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net