Il giorno Sun, 5 May 2002, Tom Brown cosė ha scritto: |From: Tom Brown <[EMAIL PROTECTED]> |To: [EMAIL PROTECTED] |Date: Sun, 05 May 2002 10:58:13 -0500 |Subject: [Ltsp-discuss] TFTP error 1 file not found 3c509 | |I was frustrated trying to get a built-in 3c509 isa nic to net boot on a Dell |GXM133 workstation. The solution was: | |1. Download 3Com's DOS nic utility |2. Use it to disable isa plug-n-play on the card and assign an irq and port to |the nic |3. Set option-128, option-129 in the workstation setup in dhcpd.conf file |4. Restart dhcpd |
Concerning the 3c509, in the 1999 edition (the latest I could find) of the Ethernet-HOWTO it is stated that the card also has to be set to use either the UTP (RJ45) or the AUI or the BNC (RG58) media, _not_ the AUTO selection, since the Linux driver is not yet capable of automatically selecting what kind of cable the card has attached. to quote the HOWTO: 3c509B users should use either the supplied DOS utility to disable the plug and play support, and to set the output media to what they require. The linux driver currently does not support the Autodetect media setting, so you have to select 10Base-T or 10Base-2 or AUI. Note that to turn off PnP entirely, you should do a 3C5X9CFG /PNP:DISABLE and then follow that with a hard reset to ensure that it takes effect. Sandro -- Bellum se ipsum alet. La guerra nutre se stessa. Livio, "Ab urbe condita", XXXIV,9 _______________________________________________________________ Have big pipes? SourceForge.net is looking for download mirrors. We supply the hardware. You get the recognition. Email Us: [EMAIL PROTECTED] _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net