Thanks for the pointing out the perfect mistake. Regards Dinesh
[EMAIL PROTECTED] wrote: > K, > > Take the '.o' off of the module names. > > Jim McQuillan > [EMAIL PROTECTED] > > On Wed, 22 May 2002, vcare wrote: > > > I am not able to configure a old creative 16 PNP ISA card . it shows > > that there is IRQ Conflict at no 7 , > > It recognizes the I0 at 220. it says sb.o 4.3(OK) > > In my Lts.conf > > I have added smodule_01= uart401.o > > smodule_02= sb.o > > smodule_03=opl03.o > > If i give MOdule=sb.o io=0x220 irq=5 dma=1 , it says > > MODPROBE cannot locate module sb.o > > > > Another make of creative PNP ISA card works very well , i have about 8 > > old cards , wants to give to schools for there multimedia Linux > > Stations. > > > > Your guidance will be a great help > > > > Regards > > K.Dinesh > > > > > > -- _______________________________________________________________ Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net