On Sun, 28 Jul 2002 13:47:54 +0200 "Morten" <[EMAIL PROTECTED]> wrote:
> I have put up 4 printers on my LTSP clinets, One in each class. IT works > great from all programs in Linux, accept OpenOffice > I have found out that OpenOffice has a setup printer program called > "spadmin". I have tryed to add the printer in there but are running into > problems. In the command line i first Wrote "lpr" (somone in OpnenOffice > forum said that). This made the printer work well but only on that computer. > It was like install a Local Printer. He thougth it must be a special command > to use when using LTSP. So the question is : Does anyone know the command > line to write when installing the following printer in the Open Office > spadmin program? > > > I have a HP laserjet 4L Installed on 192.168.60:9102 > > Thanks for the attantion > > Morten Try using 'lpr -P printername' when you run spadmin. Also, you need to run spadmin from /usr/lib/openoffice/program (your location may vary) as root to add printers system wide. If you run it as a normal user from $HOME/.openoffice/ then it will only add the printer in openoffice for that one user. ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
