Dirk, You need to set XSERVER = XF86_S3 and, you need to install the ltsp_x336_s3 package.
Jim McQuillan [EMAIL PROTECTED] On Mon, 14 Oct 2002, Dirk Schouten wrote: > Hi Group, > I have LTSP on RH7.3. > LTSP seems to be running ok in runlevel 3 (when specified in lts.conf). > > However, when trying runlevel 5, all I get is a screen that periodically > flashes (you see the screen filled with commands etc, then it turns black > for 5 seconds, then you see the commands screen, then it turns black, etc,) > I tried 'everything' -1 (the right solution). > > 1. My videocard is not automatically detected when I set XSERVER = auto. > 2. When I try to manually ad the card (finding it on the vidlist), gives > the same flashing screen. > 3. when running start_ws I get: > fatal server error > no screen found > > The workstation is a DELL with an integrated S3 Trio 64V2 /DX/GX > > What am I overlooking? Any help would be greatly appreciated, > Kind regards, > Dirk > > > > ------------------------------------------------------- > This sf.net email is sponsored by:ThinkGeek > Welcome to geek heaven. > http://thinkgeek.com/sf > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net > -- ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
