On Sat, Jan 11, 2003 at 09:13:58AM +0100, Ragnar Wisloff wrote: > > ........................done > > A20 disabled via BIOS > > Perhaps this is a clue? Usually this can be enabled again in the BIOS.
There's no selection in the BIOS to change this setting. As additional info, here's what shows up on the terminal before the kernel loads: .000021.0000 done ROM segment 0x0800 length 0x4000 reloc 0x9400 A20 enabled via BIOS Etherboot 5.0.7 (GPL) Tagged ELF for [NE*000] Boot from (N)etwork or from (L)ocal? The message "A20 enabled via BIOS" appears before the kernel loads, and the message "A20 disabled via BIOS" appears after the kernel loads? ------------------------------------------------------- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net