----- Forwarded message from Jake Schroeder <[EMAIL PROTECTED]> -----
Date: Fri, 17 Jan 2003 09:02:09 -0600
From: Jake Schroeder <[EMAIL PROTECTED]>
To: Silly Wu <[EMAIL PROTECTED]>
Subject: Re: [Ltsp-discuss] PXE booting problem with VIA Epia M9000
I notice that in your "host ws001" block, nowhere does it say the IP
address of the server to TFTP the kernel from. Doesn't this need to be
somewhere on each "filename" line?
Happy to help,
- Jake
On Fri, Jan 17, 2003 at 11:45:32AM +0100, Silly Wu wrote:
> Hi
> I have downloaded latest packages for LTSP and installed in my system. I
> trying to boot through Network card (PXE) on the VIA Mainboard Epia
> M9000 (Via- RhineII - NIC). My client PC geting IP address sucessfully.
> But when loading file it was saying:
> "Intel UNDI, PXE 2.0 (build 082)"
> "PXE - E11 ARP Timeout"
> "PXE - E38 TFTP cannot open connection"
> Can any one help me how do i solve this problem?.
> My dhcpd.conf:
...
> host ws001 {
> hardware ethernet 01:23:45:67:89:AB;
> fixed-address 192.168.0.66;
> if substring (option vendor-class-identifier, 0, 9) = "PXEClient" {
> filename "/lts/eb-5[1].0.8-via-rhine.lzpxe"; }
> else if substring (option vendor-class-identifier, 0, 9) =
> "Etherboot" { filename "/lts/vmlinuz-2.4.19-ltsp-1";
> option vendor-encapsulated-options
> 3c:09:45:74:68:65:72:62:6f:6f:74:ff;
> }
> }
> }
>
--
----- End forwarded message -----
--
-------------------------------------------------------
This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will
allow you to extend the highest allowed 128 bit encryption to all your
clients even if they use browsers that are limited to 40 bit encryption.
http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
