Hi
> i am using rtl8139 NIC(32 pin socket)
> i am using eprom chip with no M27c256B (28 pin)
> i have burned rtl8139.lzrom from rom-o-matic to my chip.
> i have put the chip on NIC.
> i have given option to boot from lan in bios
> i have enabled the NIC for eprom using rset8139.exe
>
> but my computer while booting does not go to NIC
> it directly boots from HD which is the second boot device.
>
> plz can anybody help
> IT'as URGENT
You MUST config the card to have a bootrom (a dos setup.exe type prog)
Once you have config'd the card: enabled the rom space
and have a rom: correct 555aa header, CS size etc
in the correct space Pin14 @ bootom
then
post: runs the eprom code (which boots)
the end
James
-------------------------------------------------------
This SF.net email is sponsored by: Scholarships for Techies!
Can't afford IT training? All 2003 ictp students receive scholarships.
Get hands-on training in Microsoft, Cisco, Sun, Linux/UNIX, and more.
www.ictp.com/training/sourceforge.asp
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
