Any more ideas, putting RUNLEVEL = 5 in does not work -----Original Message----- From: simo [mailto:[EMAIL PROTECTED] Sent: 24 February 2003 17:19 To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: RE: [Ltsp-discuss] first install
ok here's I think u'r missing a RUNLEVEL =5 in your default section here's an example: [Default] SERVER = 10.0.0.1 XSERVER = auto X_MOUSE_PROTOCOL = "PS/2" X_MOUSE_DEVICE = "/dev/psaux" X_MOUSE_RESOLUTION = 400 X_MOUSE_BUTTONS = 3 USE_XFS = N LOCAL_APPS = N RUNLEVEL = 5 [ws001] XSERVER = auto LOCAL_APPS = N USE_NFS_SWAP = N SWAPFILE_SIZE = 48m RUNLEVEL = 5 *********** REPLY SEPARATOR *********** On 2/24/2003 at 12:10 PM Barber, Patrick (WorldCom) wrote: >tried this, >-rw-r----- 1 root root 0 Feb 24 16:53 XFree86.0.log >still get same error, my lts.conf file shows the following if it helps > >[Default] > XSERVER = auto > X_MOUSE_PROTOCOL = "PS/2" > X_MOUSE_DEVICE = "/dev/psaux" > X_MOUSE_BUTTONS = 3 > USE_XFS = N > LOCAL_APPS = N > >[zeus] >NIS_DOMAIN = olympus >SERVER = 192.168.2.253 >XDM_SERVER = 192.168.2.253 >RUNLEVEL = 5 > >zeus is my test workstation, my server is hermes (192.168.2.25)3, both >machines are in the server '/etc/hosts' file, and zeus has a fixed lease >within the '/etc/dhcpd.conf' as below > >group { > use-host-decl-names on; > option log-servers 192.168.2.253; > > host zeus { > option x-display-manager 192.168.2.253; > option log-servers 192.168.2.253; > option root-path "/opt/ltsp/i386/i386"; > option nis-domain "olympus"; > option domain-name "olympus"; > option subnet-mask 255.255.255.0; > hardware ethernet 00:50:8b:94:4f:90; > fixed-address 192.168.2.29; > filename "/lts/vmlinuz-2.4.19-ltsp-1"; > option option-128 00:50:8b:94:4f:90; > option option-129 "NIC=eepro100"; > } >} > >-----Original Message----- >From: simo [mailto:[EMAIL PROTECTED] >Sent: 24 February 2003 16:44 >To: Barber, Patrick (WorldCom) >Subject: Re: [Ltsp-discuss] first install > > >make sure that the "/var/log/XFree86.0.log" existe with the right >permission >it should be -rw-r----- > > > >*********** REPLY SEPARATOR *********** > >On 2/24/2003 at 11:16 AM Barber, Patrick (WorldCom) wrote: > >>Hope this list can help me? >> >>I have just done my first install of LTSP, with some degree of success, >>(well done to the team), however, i do have some problems. >> >>after completing a default install on SuSE 8.0 using: >>ltsp_core-3.0.7.i386.rpm >>ltsp_kernel-3.0.5.i386.rpm >>ltsp_x_core-3.0.4.i386.rpm >>ltsp_x_fonts-3.0.0.i386.rpm >> >>and using rom'o'matic version 5.1.3 for ether express,(eepro100) >> >>I can boot to the telnet login at runlevel 4 no problems, however when i >>change to runlevel 5 i get the error >> >>Fatel server error: >>Cannot open log file "/var/log/XFree86.0.log" >> >>has any body had this problem before? where am i going wrong? >> >>thanks in advance >> >>Patrick Barber >>Email: [EMAIL PROTECTED] >> >> >> >>------------------------------------------------------- >>This sf.net email is sponsored by:ThinkGeek >>Welcome to geek heaven. >>http://thinkgeek.com/sf >>_____________________________________________________________________ >>Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: >> https://lists.sourceforge.net/lists/listinfo/ltsp-discuss >>For additional LTSP help, try #ltsp channel on irc.freenode.net ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net