I am using the lp_server component from a win2k server with no problems. You just need to make sure win2k is set to jetdirect and port 9100 (assuming printer0) and it should work fine.
Macky On Fri, 2003-07-18 at 02:33, Carlos Gonzales wrote: > Hello everyone, > > I've setup printers connected to terminals > with no problems. These are HP ink jet printers. > I can print to the printers through linux but not > Windows 2000 servers. When I send jobs to the printer > from Win2K nothing prints. Are the terminals able to take print > jobs from windows machines? > > Thanks > > Carlos Gonzales > > > > ------------------------------------------------------- > This SF.net email is sponsored by: VM Ware > With VMware you can run multiple operating systems on a single machine. > WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the > same time. Free trial click here: http://www.vmware.com/wl/offer/345/0 > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.freenode.net ------------------------------------------------------- This SF.net email is sponsored by: VM Ware With VMware you can run multiple operating systems on a single machine. WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the same time. Free trial click here: http://www.vmware.com/wl/offer/345/0 _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net