Hi, I've been toying with a LTSP 3.0 setup and have got to grips with most things but because my test terminals all boot via PXE I've never realy bothered about the boot process.
Anyhoo I've upgraded to LTSP 4.0 and have added an extra NIC into the mix and have run into a problem : The server has a built in ethernet ( eth1 ) and a pci ethernet card (eth0). Eth1 is set up to register on another network via another DHCP server and is working fine ( i can see the rest of the network and use the net ok ) Eth0 is running the ltsp network via dhcp, the problem is that my test terminal cannot boot using pxe because it can't find a dhcp broadcast / server ?? Any ideas anyone ?? I'm assuming that there's a terminal boot logfile somewhere but I can't find it ?? Thanks Karl Wheeler [EMAIL PROTECTED] ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net