Hi > So far, so good. Got it working, with one exception: > > The screen resolution stays at what looks like somewhere around 800x600, > no matter what I do. > > I've tried setting X_MODE_0 with all sorts of values and rebooted the > workstation countless times. > No change. (.... and the XWindows ctrl-alt-kb+ mode switching doesn't do > anything...) > > Here is the workstation's section in lts.conf: > > [00:A0:24:96:07:D0] > SERVER = 192.168.2.110 > XSERVER = cirrus > X_MODE_0 = 1024x768 > X_MODE_1 = 800x600 > X_MODE_2 = 640x480 > MODULE_0x = serial > SERIAL_IRQ3 = 3 > X_MOUSE_PROTOCOL = "Microsoft" > X_MOUSE_DEVICE = "/dev/ttyS3" > X_MOUSE_RESOLUTION = 50 > X_MOUSE_BAUD = 1200 > X_MOUSE_BUTTONS = 3 > USE_XFS = N > SCREEN_01 = startx > SCREEN_02 = shell > > I'm using a Cirrus Logic GD-5440 video card.
When I used a geode graphics this is what happened. Could get only 800x600 and only VESA. Instead I now use via itx James ------------------------------------------------------- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
