Clients boot with 2.4.26-ltsp-3
Do I need to add
MODULE_01 = usb-uhci
to the lts.conf file of the client withthe USB printer? On another
server with a USB mouse I do load that module.
--Karl
At 10:45 PM 1/30/2006 -0500, you wrote:
What kernel are you using to boot the client?
2.4.x I hope.
Pete Billson
--
http://www.elbnet.com
ELB Internet Service, Inc.
Web Design, Computer Consulting, Internet Hosting
Karl Zander wrote:
Its more then just the print driver. I had another USB printer, a
Brother, that also did not work. I changed to parallel it worked. Same
driver. I think I am missing something in the USB setup on LTSP, I just
don't know what. I can not telnet to the printer on port 9100.
--Karl
At 05:12 PM 1/30/2006 -0700, you wrote:
I think I have an HP that gave me some problems. I had to use a
different printer driver.=20
Did you test the printer on a local system?
Did you test it locally on the LTSP server?
Can you telnet to the printer at port 9100?
Do you have syslogd enabled?
Do you get log messages from the terminal about the printer being on
line?
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
