Hi all, I have a LTSP server, installed with the all-in-one LTSP CD with CentOS.
Now I have some HP t5730 thin clients. I want to boot them using PXE. In the beginning I got a kernel error that the NIC wasn't found. With a little search I discovered that the NIC is a broadcom Netlink. The Linux driver is the "tg3". So I specified the NIC at the kernel options (NIC=tg3). Now the booting proces goes further until the driver is initialized. Then it "freezes". The last few sentences before freezing are as follow: Running /linuxrc Mouting /proc linuxrc: Installing tg3 driver modprobe tg3 insmod /lib/modules/2.6.17-8-ltsp-1/kernel/drivers/net/tg3.ko tg3.c: v3.59 (June 8, 2006) ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 0 (level, low) -> IRQ 0 After the last sentence the boot proces stops and I don't have a clue why it stops. I have search for a solution on the web, but did not find one. I hope somebody knows what I am doing wrong! Thanks. Kind regards, Daniël ------------------------------------------------------------------------------ SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada. The future of the web can't happen without you. Join us at MIX09 to help pave the way to the Next Web now. Learn more and register at http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/ _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
