On 14/03/2012 04:51 μμ, Pierre AUSSAGUEL wrote: > ...The NIC is a PCMCIA One. > > What is the best way to connect to the server ?
You only need to transfer the LTSP kernel and initrd to your local disk. Copy the kernel from /srv/tftp/ltsp/i386/vmlinuz etc to a new /ltsp/ dir on your client. Then create grub entries (from /etc/grub.d/40-custom or so) for this kernel, with the same boot parameters as specified in your server's /srv/tftp/ltsp/i386/pxelinux.cfg/default. If special steps were needed for your PCMCIA card to work, do them in your server LTSP chroot to get an initramfs that supports it. ------------------------------------------------------------------------------ Virtualization & Cloud Management Using Capacity Planning Cloud computing makes use of virtualization - but cloud computing also focuses on allowing computing to be delivered as a service. http://www.accelacomm.com/jaw/sfnl/114/51521223/ _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net