On Wed, 28 Apr 2010, R. Scott Belford wrote:

mirror:/etc/network# netstat -rnA inet6
Kernel IPv6 routing table
Destination                    Next Hop                   Flag Met Ref Use If
2607:f278:4101:12::/64         ::                         UAe  256 0  5009 eth0
fe80::/64                      ::                         U    256 0     0 eth0
::/0                           fe80::217:c5ff:fe0f:6ced   UGDAe 1024 0
42541 eth0
::/0                           fe80::209:7bff:fedc:400    UGDAe 1024 0
   0 eth0
::/0                           ::                         !n   -1  1 47551 lo
mirror:/etc/network# ping6 -I eth0 fe80::217:c5ff:fe0f:6ced
PING fe80::217:c5ff:fe0f:6ced(fe80::217:c5ff:fe0f:6ced) from
fe80::204:76ff:fef1:edc8 eth0: 56 data bytes
64 bytes from fe80::217:c5ff:fe0f:6ced: icmp_seq=1 ttl=64 time=0.778 ms
64 bytes from fe80::217:c5ff:fe0f:6ced: icmp_seq=2 ttl=64 time=0.428 ms
64 bytes from fe80::217:c5ff:fe0f:6ced: icmp_seq=3 ttl=64 time=0.549 ms
64 bytes from fe80::217:c5ff:fe0f:6ced: icmp_seq=4 ttl=64 time=0.442 ms
^C
--- fe80::217:c5ff:fe0f:6ced ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3002ms
rtt min/avg/max/mdev = 0.428/0.549/0.778/0.141 ms
mirror:/etc/network# ping6 -I eth0 fe80::209:7bff:fedc:400
PING fe80::209:7bff:fedc:400(fe80::209:7bff:fedc:400) from
fe80::204:76ff:fef1:edc8 eth0: 56 data bytes
64 bytes from fe80::209:7bff:fedc:400: icmp_seq=1 ttl=64 time=1.08 ms
64 bytes from fe80::209:7bff:fedc:400: icmp_seq=2 ttl=64 time=0.408 ms
64 bytes from fe80::209:7bff:fedc:400: icmp_seq=3 ttl=64 time=0.449 ms
^C

And what does traceroute6 show to various hosts (eg. freebsd.org, isc.org, lava.net)? You may find one of the two gateways is not routing properly. If that's the case, specify -g in traceroute6 and see which one works.

Antonio Querubin
808-545-5282 x3003
e-mail/xmpp:  t...@lava.net
_______________________________________________
LUAU@lists.freesoftwarehawaii.org mailing list
http://lists.freesoftwarehawaii.org/listinfo.cgi/luau-freesoftwarehawaii.org

Reply via email to