Section "Module" # Load "dbe" # Double buffer extension Load "record" Load "extmod" Load "xtrap"
SubSection "extmod" Option "omit xfree86-dga" # don't initialise the DGA extension EndSubSection # Load "speedo" # Load "xtt" Load "bitmap" Load "freetype" Load "type1" Load "glx" # Load "dri" EndSection #Section "DRI" # Mode 0666 #EndSection Section "Extensions" Option "Composite" "Enable" EndSection # ********************************************************************** # Files section. This allows default font and rgb paths to be set # ********************************************************************** Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" # FontPath "/usr/X11R6/lib/X11/fonts/TrueType/" # FontPath "/usr/X11R6/lib/X11/fonts/freefont/" # Corefonts (type1-cyrillic, truetype-ms, bitmap-cyrillic) # Cyrillic fonts for XFree distribution # The module search path. The default path is shown here. # ModulePath "/usr/X11R6/lib/modules" FontPath "/usr/X11R6/lib/X11/fonts/local" FontPath "/usr/X11R6/lib/X11/fonts/misc" FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Speedo" FontPath "/usr/X11R6/lib/X11/fonts/Type1" FontPath "/usr/X11R6/lib/X11/fonts/corefonts/type1" FontPath "/usr/X11R6/lib/X11/fonts/corefonts/truetype" FontPath "/usr/X11R6/lib/X11/fonts/corefonts/bitmap/bolkhov/cp1251/75dpi" FontPath "/usr/X11R6/lib/X11/fonts/corefonts/bitmap/bolkhov/cp1251/misc" FontPath "/usr/X11R6/lib/X11/fonts/corefonts/bitmap/bolkhov/iso-10646-1/75dpi" FontPath "/usr/X11R6/lib/X11/fonts/corefonts/bitmap/bolkhov/iso-10646-1/misc" FontPath "/usr/X11R6/lib/X11/fonts/corefonts/bitmap/bolkhov/iso-8859-5/75dpi" FontPath "/usr/X11R6/lib/X11/fonts/corefonts/bitmap/bolkhov/iso-8859-5/misc" FontPath "/usr/X11R6/lib/X11/fonts/corefonts/bitmap/bolkhov/koi8-r/75dpi" FontPath "/usr/X11R6/lib/X11/fonts/corefonts/bitmap/bolkhov/koi8-r/misc" FontPath "/usr/X11R6/lib/X11/fonts/corefonts/bitmap/cronyx/cp1251/100dpi" FontPath "/usr/X11R6/lib/X11/fonts/corefonts/bitmap/cronyx/iso-10646-1/100dpi" FontPath "/usr/X11R6/lib/X11/fonts/corefonts/bitmap/misc" FontPath "/usr/X11R6/lib/X11/fonts/cyrillic" FontPath "/usr/local/share/fonts" EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" # Option "NoTrapSignals" # Option "DontVTSwitch" # Option "DontZap" # Option "Dont Zoom" # Option "DisableVidModeExtension" # Option "AllowNonLocalXvidtune" # Option "DisableModInDev" # Option "AllowNonLocalModInDev" Option "HandleSpecialKeys" "Always" EndSection # ********************************************************************** # Input devices # ********************************************************************** Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" Option "XkbLayout" "us,bg" Option "XkbVariant" ",phonetic" # Option "XkbLayout" "us,bg,bg" # Option "XkbVariant" ",phonetic,bds" Option "XKbOptions" "grp:alt_shift_toggle,grp_led:scroll" EndSection Section "InputDevice" Identifier "Keyboard1" Driver "Keyboard" Option "AutoRepeat" "500 30" Option "XkbRules" "xfree86" Option "XkbModel" "pc101" Option "XkbLayout" "us" EndSection # ********************************************************************** # Core Pointer's InputDevice section # ********************************************************************** Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "ImPS/2" Option "Device" "/dev/psaux" Option "Buttons" "5" Option "ZAxisMapping" "4 5" EndSection # ********************************************************************** # Monitor section # ********************************************************************** Section "Monitor" Identifier "Monitor0" VendorName "Philips" ModelName "PHL-105B" HorizSync 30-70 VertRefresh 50-160 # 1024x768-85 EndSection # ********************************************************************** # Graphics device section # ********************************************************************** Section "Device" Identifier "Standard VGA" VendorName "Unknown" BoardName "Unknown" # Chipset "generic" Driver "vga" # BusID "PCI:0:10:0" # VideoRam 256 # Clocks 25.2 28.3 EndSection Section "Device" Identifier "GFORCE" Driver "nvidia" Option "NvAGP" "1" Option "AllowGLXWithComposite" "true" Option "RenderAccel" "true" #VideoRam 65536 # Insert Clocks lines here if appropriate EndSection # ********************************************************************** # Screen sections # ********************************************************************** Section "Screen" Identifier "Screen0" Device "GFORCE" Monitor "Monitor0" DefaultDepth 24 Subsection "Display" Depth 16 Modes "1024x768" ViewPort 0 0 # Virtual 1280 1024 EndSubsection Subsection "Display" Depth 24 Modes "1024x768" ViewPort 0 0 # Virtual 1152 900 EndSubsection EndSection # ********************************************************************** # ServerLayout sections. # ********************************************************************** Section "ServerLayout" Identifier "Default Layout" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Проблема ми в момента е, че когато е пуснато "RenderAccel", KDE забива при стартиране, но прочитайки това-онова, разбрах, че проблема идва от KDE-то, което идва със Slackware, ако се компилира на ново или се изтеглят пакетите от официалния сайт на KDE ще се оправи. С GNOME (Gware), няма проблеми. -- MafiaInc (c) 1983 - 2005 http://www.mafiainc.net ---------- Original Message ----------- From: Ivaylo Toshev <[EMAIL PROTECTED]> To: lug-bg@linux-bulgaria.org Sent: Tue, 25 Oct 2005 10:25:35 +0000 Subject: Re: lug-bg: "Глезотии" за x.org > Ха ... ! > А дали това е feature само на драйвера на NVIDIA или е стандартна > директива за секцията Device ? > Можеш ли да постнеш целия си xorg.conf файл , ако не те затруднява ? > > MafiaInc wrote: > > >Пробвайте да добавите в Device секцията: > >Option "AllowGLXWithComposite" "true" > > > >При мен става така: > > > >Section "Device" > > Identifier "GFORCE" > > Driver "nvidia" > > Option "AllowGLXWithComposite" "true" > > #VideoRam 65536 > > # Insert Clocks lines here if appropriate > >EndSection > > > >. . . и работи :) > > > >(**) NVIDIA(0): Option "AllowGLXWithComposite" "true" > > > >-- > >MafiaInc (c) 1983 - 2005 http://www.mafiainc.net > > > >---------- Original Message ----------- > >From: "MafiaInc" <[EMAIL PROTECTED]> > >To: lug-bg@linux-bulgaria.org > >Sent: Mon, 24 Oct 2005 18:48:21 +0300 > >Subject: Re: lug-bg: X prez putty > > > > > > > >>...съжелявам за предното съобщение - openwebmail беше виновен :P > >> > >>Исках да кажа, че ако имаш същата грешка, можеш да я оправиш, като > >>преименуваш > >>файловете : nxagent, nxdesktop, nxviewer съответно на същите с > >>разширение .bin примерно и после да създадеш нещо като обвивка за > >>тях по следния начин: за nxagent : > >>#!/bin/sh > >>LD_LIBRARY_PATH=/usr/lib/NX/lib /usr/bin/nxagent.bin "$@" > >> > >>... и така за всички. > >> > >>Споделям това преди да си казал какъв е проблема, защото прочитайки други > >>пощенски списъци, установих, че в 80% от случайте с новата версия на > >>NX библиотеките това е проблема. :) > >> > >>Успех > >> > >>-- > >>MafiaInc (c) 1983 - 2005 http://www.mafiainc.net > >> > >>---------- Original Message ----------- > >>From: Qsin <[EMAIL PROTECTED]> > >>To: lug-bg@linux-bulgaria.org > >>Sent: Mon, 24 Oct 2005 13:54:27 +0300 > >>Subject: Re: lug-bg: X prez putty > >> > >> > >> > >>>Andrey Andreev wrote: > >>> > >>> > >>> > >>>>Georgi Georgiev wrote: > >>>> > >>>> > >>>> > >>>> > >>>>>>Пробвай freenx на Линукс машината и nxClient-а на NoMachine. Бачка > >>>>>>перфектно и за по-бавни връзки. Пак всичко е през ssh, но е добре > >>>>>>компресирано и няма нужда да слагаш cygwin-ски X на винбоуза. > >>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>Може ли да обясниш малко по-подробно на нас начинаещите или да ни > >>>>>насочиш към материал за четене. > >>>>> > >>>>> > >>>>> > >>>>> > >>>>Чакай че не казах как се пуска. 8) Намираш си freenx за твойто си > >>>>дистро, слагаш си го. Ако си с Дебиан и инсталаторът те пита какви > >>>>ключове да ползва, казваш да си ползва nomachine-ските, ще го оправиш > >>>>след като тръгне. Пускаш nxsetup, четеш малко readme-та че не знам какво > >>>>ти е дистрото, сваляш клиента от сайта на nomachine пускаш wizard-а > >>>>[sic!] и се закачаш. :) > >>>> > >>>>Аре, > >>>> > >>>>Андро > >>>> > >>>> > >>>> > >>>> > >>>Уж се закачва и след това кляка: > >>> > >>>5 [main] nxproxy 5736 tty_list::allocate_tty: No tty allocated > >>> > >>>NXPROXY - Version 1.4.0 > >>> > >>>Copyright (C) 2001, 2004 NoMachine. > >>>See http://www.nomachine.com/ for more information. > >>> > >>>Info: Proxy running in client mode with pid '5736'. > >>>Info: Waiting for connection from any host on port '2088'. > >>>Info: Accepted connection from '127.0.0.1' on port '2174'. > >>>Info: Connection with remote proxy established. > >>>Info: Handshaking with remote proxy ':5000' completed. > >>>Info: Synchronizing local and remote caches. > >>>Info: Not using NX delta compression. > >>>Info: Using lan link parameters 16384/80/16/8192. > >>>Info: Using pack method '16m-jpeg-9' with session 'unix-kde'. > >>>Info: Not using ZLIB stream compression. > >>>Info: Not using remote ZLIB stream compression. > >>>Info: Not using persistent cache. > >>>Info: Using remote server connected on port '2088'. > >>>Info: Starting X protocol compression. > >>>Info: Established X server connection. > >>>Info: Using shared memory support in X server. > >>>Info: End of session requested by remote proxy. > >>>Info: Shutting down the link and exiting. > >>> > >>>Явор Атанасов > >>> > >>> > >>------- End of Original Message ------- > >> > >> > >------- End of Original Message ------- > > > > > > > > ------- End of Original Message -------