Що за "хардуерен" райд може да е това, след като му виждаш дисковете по отделно ?!?
П.С. според мен си ползвай софтуерния ... по-малко главоболия ще те сполетят. Поздрави, Цветин. ________________________________ From: Атанас Мавров / Atanas Mavrov <[EMAIL PROTECTED]> To: lug-bg@linux-bulgaria.org Sent: Monday, December 8, 2008 7:54:28 PM Subject: [Lug-bg] RAID и debian Здравейте, имам следния проблем, ще се радвам ако някой може да помогне - става въпрос за RAID контролер INTEL 82801HR/HO/HH (дъното е supermicro X7SBL-LN2). Опитвам се да използвам хардуерния RAID, но нещо не мога да се справя. Ето какво съм пробвал до сега - debian netinstaller (4.0r5). От BIOS -а имам две възможни настройки за RAID -а INTEL/Adaptec. И така - с INTEL създавам RAID (1) масив, инсталацията започва, но когато стигна до разделянето на исковете, вместо един диск се виждат двата. Разбира се мога да разделя единия и да инсталирам ОС, но след като рестартирам се изписва само GRUB и толкова, но така или иначе това не е решение. Ако се опитам да използвам Adaptec изобщо не намира дисковете. Накрая за да тръгне GRUB -а изкарах единия диск от масива и инсталирах ОС, сложих и софтуерен RAID, ще прикача и dmesg -а ако може да помогне. Благодаря Ви и поздрави! Linux version 2.6.18-6-686 (Debian 2.6.18.dfsg.1-23) ([EMAIL PROTECTED]) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Mon Oct 13 16:13:09 UTC 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 0000000000096000 (usable) BIOS-e820: 0000000000096000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fe70000 (usable) BIOS-e820: 000000007fe70000 - 000000007fe7c000 (ACPI data) BIOS-e820: 000000007fe7c000 - 000000007fe7f000 (ACPI NVS) BIOS-e820: 000000007fe7f000 - 0000000080000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) 1150MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f69c0 On node 0 totalpages: 523888 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 294512 pages, LIFO batch:31 DMI present. ACPI: RSDP (v002 PTLTD ) @ 0x000f6990 ACPI: XSDT (v001 SHIMAS SDS-ONE 0x06040000 LTP 0x00000000) @ 0x7fe730b9 ACPI: FADT (v003 INTEL 0x06040000 PTL 0x00000002) @ 0x7fe7b440 ACPI: _MAR (v001 Intel OEMDMAR 0x06040000 LOHR 0x00000001) @ 0x7fe7b534 ACPI: TCPA (v001 Intel 0x06040000 PTL 0x0000005a) @ 0x7fe7b564 ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0x7fe7b596 ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x7fe7b5d2 ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x7fe7b63a ACPI: SPCR (v001 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001) @ 0x7fe7b662 ACPI: ERST (v001 SMCI ERSTTBL 0x06040000 SMCI 0x00000001) @ 0x7fe7b6b2 ACPI: HEST (v001 SMCI HESTTBL 0x06040000 SMCI 0x00000001) @ 0x7fe7bc42 ACPI: BERT (v001 SMCI BERTTBL 0x06040000 SMCI 0x00000001) @ 0x7fe7bcea ACPI: EINJ (v001 SMCI EINJTBL 0x06040000 SMCI 0x00000001) @ 0x7fe7bd1a ACPI: SLIC (v001 SHIMAS SDS-ONE 0x06040000 LTP 0x00000000) @ 0x7fe7be8a ACPI: SSDT (v001 PmRef Cpu0Tst 0x00003000 INTL 0x20050228) @ 0x7fe749f8 ACPI: SSDT (v001 PmRef Cpu7Tst 0x00003000 INTL 0x20050228) @ 0x7fe74952 ACPI: SSDT (v001 PmRef Cpu6Tst 0x00003000 INTL 0x20050228) @ 0x7fe748ac ACPI: SSDT (v001 PmRef Cpu5Tst 0x00003000 INTL 0x20050228) @ 0x7fe74806 ACPI: SSDT (v001 PmRef Cpu4Tst 0x00003000 INTL 0x20050228) @ 0x7fe74760 ACPI: SSDT (v001 PmRef Cpu3Tst 0x00003000 INTL 0x20050228) @ 0x7fe746ba ACPI: SSDT (v001 PmRef Cpu2Tst 0x00003000 INTL 0x20050228) @ 0x7fe74614 ACPI: SSDT (v001 PmRef Cpu1Tst 0x00003000 INTL 0x20050228) @ 0x7fe7456e ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050228) @ 0x7fe73185 ACPI: DSDT (v001 INTEL BEARLAKE 0x06040000 MSFT 0x03000000) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 7:7 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 7:7 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) Detected 2660.130 MHz processor. Built 1 zonelists. Total pages: 523888 Kernel command line: root=/dev/md2 ro mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2072628k/2095552k available (1541k kernel code, 21636k reserved, 580k data, 196k init, 1178048k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5323.93 BogoMIPS (lpj=10647860) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0008e39d 00000000 00000001 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0008e39d 00000000 00000001 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 0008e39d 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20060707 CPU0: Intel(R) Core(TM)2 Duo CPU E7300 @ 2.66GHz stepping 06 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5320.33 BogoMIPS (lpj=10640667) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0008e39d 00000000 00000001 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0008e39d 00000000 00000001 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 0008e39d 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 Duo CPU E7300 @ 2.66GHz stepping 06 Total of 2 processors activated (10644.26 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs migration_cost=32 checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd Freeing initrd memory: 1720k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:11:04.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0 PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.4 IO window: 2000-2fff MEM window: de100000-de1fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.5 IO window: 3000-3fff MEM window: de200000-de2fffff PREFETCH window: disabled. PCI: Ignore bogus resource 6 [0:0] of 0000:11:04.0 PCI: Bridge: 0000:00:1e.0 IO window: 4000-4fff MEM window: de000000-de0fffff PREFETCH window: dc000000-ddffffff ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1c.4 to 64 ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1c.5 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Simple Boot Flag at 0x36 set to 0x1 audit: initializing netlink socket (disabled) audit(1228778457.800:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.4 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.4:pcie00] Allocate Port Service[0000:00:1c.4:pcie02] Allocate Port Service[0000:00:1c.4:pcie03] PCI: Setting latency timer of device 0000:00:1c.5 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.5:pcie00] Allocate Port Service[0000:00:1c.5:pcie02] Allocate Port Service[0000:00:1c.5:pcie03] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 Starting balanced_irq Using IPI No-Shortcut mode ACPI: (supports S0 S1 S4 S5) RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 1720KiB [1 disk] into ram disk... |/-\|/-\|<6>Time: tsc clocksource has been installed. /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- \|/-\|/-\|/-\|/-\|/-\|/-\done. VFS: Mounted root (cramfs filesystem) readonly. Freeing unused kernel memory: 196k freed md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 md: raid1 personality registered for level 1 SCSI subsystem initialized libata version 2.00 loaded. _______________________________________________ Lug-bg mailing list Lug-bg@linux-bulgaria.org http://linux-bulgaria.org/mailman/listinfo/lug-bg
_______________________________________________ Lug-bg mailing list Lug-bg@linux-bulgaria.org http://linux-bulgaria.org/mailman/listinfo/lug-bg