I found the answer to the rancid - extreme problem I had. I will post
the answer here for anyone else who might experience the same problem.
Below are the working configs (x.x.x.x is the switch's IP address):
extreme description in /usr/local/rancid/.cloginrc
# Extreme Switch
add user x.x.x.x admin
add password x.x.x.x {admin-passwd-here}
add noenable x.x.x.x 0
add autoenable x.x.x.x 1
and in /usr/local/rancid/switches/router.db
x.x.x.x:extreme:up
Regards,
Joseph Mpora
On Fri, Apr 23, 2010 at 2:14 PM, joseph mpora <[email protected]> wrote:
> Was hoping there was someone here who was monitoring extremes :)
>
> Anyway, will keep digging, probably time to join the rancid mailing list.
>
> On Fri, Apr 23, 2010 at 2:03 PM, Noah Sematimba <[email protected]> wrote:
>>
>> You will probably get a lot more help if you post this on the afnog mailing
>> list rather than here. The rancid author is one of the subscribers on that
>> particular mailing list.
>>
>> Noah.
>> On Apr 22, 2010, at 9:08 AM, joseph mpora wrote:
>>
>>> Guys,
>>>
>>> Am having some trouble configuring rancid to monitor extreme summit
>>> 200-48 switches (it works perfectly for cisco switches).
>>>
>>> The extreme switches are configured to allow the 'admin' user to
>>> logon, full enable rights are granted on successful authentication
>>> (extremes don't have an 'enable' mode)
>>>
>>> Here is my entry in .cloginrc (x.x.x.x is the ip address of the switch:))
>>>
>>> # LAN Extreme Switch
>>> add user x.x.x.x admin
>>> add password x.x.x.x {admin-passwd-here}
>>> add autoenable x.x.x.x
>>> add userprompt x.x.x.x {"login:"}
>>>
>>> when i run clogin to test, this is what i get:
>>>
>>> rancid@<hostname>:~> bin/clogin x.x.x.x
>>> x.x.x.x
>>>
>>> Error: no enable password for x.x.x.x in /usr/local/rancid/.cloginrc.
>>>
>>> Is there anyone on this list that has rancid monitoring extremes that
>>> could share their config? There seems to be little documentation on
>>> rancid-extreme scenarios or perhaps my googling skills are not nearly
>>> as good.
>>>
>>> Cheers,
>>>
>>> Joseph Mpora
>>> _______________________________________________
>>> LUG mailing list
>>> [email protected]
>>> http://kym.net/mailman/listinfo/lug
>>>
>>> LUG is generously hosted by INFOCOM http://www.infocom.co.ug/
>>>
>>> All Archives can be found at http://www.mail-archive.com/[email protected]/
>>>
>>> The above comments and data are owned by whoever posted them (including
>>> attachments if any). The List's Host is not responsible for them in any way.
>>> ---------------------------------------
>>>
>>
>>
>
_______________________________________________
LUG mailing list
[email protected]
http://kym.net/mailman/listinfo/lug
LUG is generously hosted by INFOCOM http://www.infocom.co.ug/
All Archives can be found at http://www.mail-archive.com/[email protected]/
The above comments and data are owned by whoever posted them (including
attachments if any). The List's Host is not responsible for them in any way.
---------------------------------------
