--- Barbarojo <[EMAIL PROTECTED]> escribi�:
> Cuando se cuelga tira un mensaje oops? Seria bueno
> verlo para saber que hace que se
> cuelgue. �Que kernel es?
> Un lspci -vvv como root tambi�n ser�a util.
>
> Salu2
El mensaje que tira en pantalla no lo pude ver porque
reiniciaron la m�quina, pero por lo que estuve
googleando este cuelgue se produce con los drivers
binarios de NVidia. Es m�s, en mi m�quina no se llega
a registrar la salida completa al messages.
Abrazos!!
[EMAIL PROTECTED] boot]# lspci -vvv
00:00.0 Host bridge: Intel Corp. 82865G/PE/P DRAM
Controller/Host-Hub Interface (rev 02)
Subsystem: Intel Corp. 82865G/PE/P DRAM
Controller/Host-Hub Interface
Control: I/O- Mem+ BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at f8000000 (32-bit,
prefetchable) [size=64M]
Capabilities: [e4] #09 [0106]
00:02.0 VGA compatible controller: Intel Corp. 82865G
Integrated Graphics Device (rev 02) (prog-if 00 [VGA])
Subsystem: Intel Corp.: Unknown device 4246
Control: I/O+ Mem+ BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f0000000 (32-bit,
prefetchable) [size=128M]
Region 1: Memory at ffa80000 (32-bit,
non-prefetchable) [size=512K]
Region 2: I/O ports at ec00 [size=8]
Capabilities: [d0] Power Management version 1
Flags: PMEClk- DSI+ D1- D2-
AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0
PME-
00:1d.0 USB Controller: Intel Corp. 82801EB/ER
(ICH5/ICH5R) USB UHCI Controller #1 (rev 02) (prog-if
00 [UHCI])
Subsystem: Intel Corp.: Unknown device 4246
Control: I/O+ Mem- BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at c800 [size=32]
00:1d.1 USB Controller: Intel Corp. 82801EB/ER
(ICH5/ICH5R) USB UHCI Controller #2 (rev 02) (prog-if
00 [UHCI])
Subsystem: Intel Corp.: Unknown device 4246
Control: I/O+ Mem- BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 5
Region 4: I/O ports at cc00 [size=32]
00:1d.2 USB Controller: Intel Corp. 82801EB/ER
(ICH5/ICH5R) USB UHCI #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corp.: Unknown device 4246
Control: I/O+ Mem- BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 10
Region 4: I/O ports at d000 [size=32]
00:1d.3 USB Controller: Intel Corp. 82801EB/ER
(ICH5/ICH5R) USB UHCI Controller #4 (rev 02) (prog-if
00 [UHCI])
Subsystem: Intel Corp.: Unknown device 4246
Control: I/O+ Mem- BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at d400 [size=32]
00:1d.7 USB Controller: Intel Corp. 82801EB/ER
(ICH5/ICH5R) USB2 EHCI Controller (rev 02) (prog-if 20
[EHCI])
Subsystem: Intel Corp.: Unknown device 4246
Control: I/O- Mem+ BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 9
Region 0: Memory at ffa7fc00 (32-bit,
non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2-
AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0
PME-
Capabilities: [58] #0a [20a0]
00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev
c2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01,
sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: ff800000-ff8fffff
Prefetchable memory behind bridge:
fff00000-000fffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort-
>Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corp. 82801EB/ER
(ICH5/ICH5R) LPC Interface Bridge (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+
MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 IDE interface: Intel Corp. 82801EB/ER
(ICH5/ICH5R) IDE Controller (rev 02) (prog-if 8a
[Master SecP PriP])
Subsystem: Intel Corp.: Unknown device 4246
Control: I/O+ Mem+ BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at ffa0 [size=16]
Region 5: Memory at 3f000000 (32-bit,
non-prefetchable) [size=1K]
00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) SATA
Controller (rev 02) (prog-if 8f [Master SecP SecO PriP
PriO])
Subsystem: Intel Corp.: Unknown device 4246
Control: I/O+ Mem- BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at e800 [size=8]
Region 1: I/O ports at e400 [size=4]
Region 2: I/O ports at e000 [size=8]
Region 3: I/O ports at dc00 [size=4]
Region 4: I/O ports at d800 [size=16]
00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R)
SMBus Controller (rev 02)
Subsystem: Intel Corp.: Unknown device 4246
Control: I/O+ Mem- BusMaster- SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 3
Region 4: I/O ports at c400 [size=32]
00:1f.5 Multimedia audio controller: Intel Corp.
82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev
02)
Subsystem: Intel Corp.: Unknown device e001
Control: I/O- Mem+ BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 3
Region 2: Memory at ffa7f800 (32-bit,
non-prefetchable) [size=512]
Region 3: Memory at ffa7f400 (32-bit,
non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2-
AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0
PME-
01:04.0 Ethernet controller: 3Com Corporation
3c905C-TX/TX-M [Tornado] (rev 78)
Subsystem: 3Com Corporation 3C905C-TX Fast
Etherlink for PC Management NIC
Control: I/O+ Mem+ BusMaster+ SpecCycle-
MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2500ns min, 2500ns max), cache
line size 10
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at bc00 [size=128]
Region 1: Memory at ff8ffc00 (32-bit,
non-prefetchable) [size=128]
Expansion ROM at ff8c0000 [disabled]
[size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+
AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2
PME-
[EMAIL PROTECTED] boot]# uname -a
Linux mail 2.4.21-27.0.1.ELsmp #1 SMP Fri Dec 24
13:49:49 EST 2004 i686 i686 i386 GNU/Linux
___________________________________
�Ganate una notebook!
Us� Yahoo! Conexi�n y particip� del sorteo de una computadora port�til.
S�lo ten�s que navegar gratis con Yahoo! y sumar chances.
Particip� en esta direcci�n web: http://conexion.yahoo.com.ar
--
Para desuscribirte ten�s que visitar la p�gina
https://listas.linux.org.ar/mailman/listinfo/lugar-gral/
/* Publica y encontra trabajo relacionado con softlibre en
http://www.linux.org.ar/modules/jobs/ */
Si ten�s alg�n inconveniente o consulta escrib� a mailto:[EMAIL PROTECTED]
